View Single Post
Old 12-11-2013, 07:06   #23 (permalink)
Faisal_Computer
Product Manager
 
Faisal_Computer's Avatar
 
Join Date: Jun 2005
Location: Kamalia, Pakistan.
Age: 32
Posts: 16,610
Member: 151871
Status: Offline
Thanks Meter: 69,219
GPGeMMC Now Supported I9500 Imei Repair/Change ( Super imei & Any Imei Both )


Here is Video how you can do it...


http://www.youtube.com/watch?v=ZMbpt6K6i9U


Details about it.

you have to make sure your phone firmware is not high than 4.2.2 ( we supported imei repair till 4.2.2 ). you have to root your phone. after root make sure usb debug is on and connect phone with original samsung usb cable. open GPGeMMC software and click on Signal Repair and do wait after software finish now you can repair/change imei to any number... YES any desire number of your choice. for doing this after signal repair you have to power on phone and use SPECIAL IMEI REPAIR cable. connect cable to phone in powered on condition and install drivers if needed. go to device manager and find what port is it make. now go to software do scan port and select proper port and write imei of your desire click on unlock and restart phone and do it. after phone restarted your phone's imei will be repaired/changed.
Please note if your phone is 4.3 then you have to downgrade. Please use Memory Card Flashing to downgrade phone keep in mind that original platform can't downgrade it. if it's need imei change then you must use super imei for this.
How to use super imei ?
downgrade phone to 4.2.2. put phone into download mode and use EFS repair after click on super imei and tick unlock and restart phone and do it. suggestions do not use 4.3 after repair by repair card. better use 4.2.2. else you can repair/change imei. don't worry if your phone have not imei or not baseband after repair signal. just flash the phone it will solve it.

Br

Faisal_Computer
 
The Following 4 Users Say Thank You to Faisal_Computer For This Useful Post:
Show/Hide list of the thanked
 
Page generated in 0.09628 seconds with 6 queries