| ================================================== ====
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====
1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.
ERROR: EMMC WAS NOT Detected! (CMD1)
Check your Test Point Soldering!
CMD1 Reply: 0x5E5E5E5E
BOOT Images Written Successfully!
Total Elapsed Time 00:00:05
what is the problem sir |