| Samsung s7392 no service after Imei Repair
Welcome to Octoplus/Octopus Box Samsung software version 1.4.1
Selected firmware file: GT-S7392_for_Unlock_and_IMEI_SN_Repair.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-S7392 phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - " + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on
Firmware write started.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing modem section...
modem section has been written successfully.
Writing DTS section...
DTS section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing system section...
system section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Firmware writing successfully completed.
Platform: Samsung Broadcom
Selected port: COM120
Selected model: GT-S7392
Connecting to phone on COM119
Detected phone model: GT-S7392
SW Version: S7392DDUAMI2/S7392ODDAMI2/S7392DDUAMI1/S7392DDUAMI2
HW Version: GT-S7392MKAINS
Firmware compiled date: Wed Sep 11 15:21:04 KST 2013
Phone SN: RZ1D92YT7LY
Android version: 4.1.2 (JZO54K)
Old IMEI A: 000000-00-000000-0
New IMEI A: 359039-03-512939-9
Writing new phone IMEI A...
New IMEI successfully written.
Please, restart the phone to apply changes
After This Emergency call only
plzz help |