where can I find win ddp+crack

[Destructor]

I find few but they doesn't work,help:cool:

[Rebels Advocate]

Hi,

I have had the same problem. I have noticed that if your are using the Cyber software the HDD serial sometimes changes by one number when you write it so the hardware id when you go to register the software is wrong and the code does not work.
I am looking for a cracked version of WinHex at the moment as this software does not seem to have this problem.

I have got a load of WinDDP versions that were sent to me the other day by another member to do some tests. The software works for him but not for me.

If i get it working ill let you know how and if nescessary ill send you the software.

Rebels Advocate.

[Destructor]

do you know how to instal ddp,i didn't have problem with win dls,I made on disc C folder name wintesla,I put all ppm+mcu filed in it together with windls,but it isn't workung with ddp,help

[Rebels Advocate]

Yes,

The problem you are having is likely to be due to the Hard Drive Serial number as WinDDP uses this to decide what code to ask for to register it.

I myself cannot get v5 to work as i dont have the code that is needed but version 3 can be cracked.
To crack it you need WinDDP V3 Pro and a program called WinHex to edit a portion of your Hard Drive. I have WinDDP V3 and a cracked copy of WinHex. If you want them just PM or email me and ill send you a my webspace address to download them from. Once you have got these you will need to do the following (Be sure to do it exactly as it is written as you can change your boot sector stopping you being able to boot up if your not careful):


1. Put your phone files in the C:\Wintesla folder
2. Extract the WinDDP 3 zip file to any folder you want
3. Extract the WinHex 10.44 SR-2 zip file to any folder you want
4. Run the Winhex.exe program in the WinHex directory
5. When the WinHex windows opens select the Open Disk option
6. Select to edit you C: (Or the letter corresponding to your main hard drive) drive
7. When the window opens displaying the hex contents of your drive go down to line 0x00000043 and change the contents to E5
8. Your cursor should now be in 0x00000044, alter its contents to 17
9. In 0x00000045 change the contents to 5C
10. In 0x00000046 change the contents to 2E
11. Click File and then Save and then exit WinHex (If you recieve a warning message ignore it and click Ok or Yes)
12. Run the WinDDP V3 program and choose the type of box you will be using
13. Enter this code: 8B6BFF1134BE5F873EB7B763
14. Click OK and your done.

If you still have trouble try shutting down and restarting. As for the new versions supported by V5 you can use the dll from V5 in V3 so ill send you that too.

Hope that helps mate,

Rebels Advocate.

[Destructor]

give me your web adress don't have ddpV3 and winhex

[Destructor]

I can't send you an e-mail becouse you disable your e-mail on forum,

[Rebels Advocate]

Check your mail for my email address. Send me a message and ill reply with the files.

Rebels Advocate

[Rebels Advocate]

I have now enabled the email option on my profile too. I did not realise it was off.