About new Lurker by Wray

[pez8210]

I´m a Wray´s product customer

I had Wray box full version buyed to Spaingsm, when I started to have some problems with new 525 versions I asked to john_spa about upgrading that box, he tolds me that if I send to him old box he will send it to me new LURKER, with no pay.

I received my old box cables with a max232 adapter attached with vynil tape (the very worst thing that I never saw before)

And with 2 keys for my computers fingerprints

I´m using vers 2.2 and I can say that I have lots of problems unlocking, very bad connection allways I tried with other cables and connectors and in my 2 computers with same result.

Maybe there is another new version with this problems fixed, but I can say that my old box works 1000 times better that this Lurker
connecting with BF´s works better than connecting with BG´s

So I lost a very good box with a special hardware:(

[Luciano]

Try to make an ( for max232 be sure you use proper capacitors ) standard interface RS232 to TTL but with extenal power, and make an connector from you'r old cables to this box, so you can use all cables.
you will need only RX, TX signals and GND.

[pez8210]

I also tried max232 with external power supply with same result
I will try to change capacitor values

Thanks

[neo_gsm]

Here is my experience :

For BFx - use Max 232 interface with 5V external power supply ;

For BG3 - use Max 232 interface with 3V external power supply.

B.R. NEO GSM

[pez8210]

Thanks neo

I will try this

But I think that Wray´s must talk here about his interfaces

[claudio_gsm]

Originally posted by pez8210
Thanks neo

I will try this

But I think that Wray´s must talk here about his interfaces

My friend for me working the BF_s and BG_s with the same scheme man ... and its just a unversal box ... i test_it in many phones ALCATEL ... but the program sometimes , this Lurker 2.2 its not 100 % finish it because some errors are from the program , we wait the USB DONGLE , in few days .... i think cause this NEW program DONGLE USB protected will be OK with all phones guys ;)

BesT RegardS ... from ALMERIA now ....

[ertorry]

claudio like spain hahaha,
i want to buy wrays luker 2.2 with no support for 100 e in grupomovilsoft but im afraid ....really unlocks micron flashes thanks guys

[claudio_gsm]

Originally posted by ertorry
claudio like spain hahaha,
i want to buy wrays luker 2.2 with no support for 100 e in grupomovilsoft but im afraid ....really unlocks micron flashes thanks guys


My friend Lurker 2.2 support allmost all flashes from BF and BG .... just in BE 1,2,3,4,5 phones are some errrors like BE5 124 not work :) , but this Monday its start the sale for Lurker 3.1 dongle USB protected who have support for new phones like 535 and 735 ;) .

PS: If u are in spain and u need algo contact me ... ;) .

BesT RegardS ...

[corachon]

Hello Claudio_Gsm........i´m from Spain too................i want to by the Gold Edition of Lurker (Versión 3)...........please contact with me please.................
Un saludo

[pez8210]

Thanks Claudio for the info

I will wait for new version with USB dongle
Yes I tested on BE5 124 and doesn´t work

[Wray]

Hi,

yes, Lurker v2.2 have some bugs due to short release time imposed by old and trusted customers who needed upgrade fast. Also it was intended only for a small group of persons to test it more like a BETA, also it was only software protected - but my resellers spread it fast and even i heard it was cracked...

A lot of errors are corrected in v3.0 and i like to believe that all are removed in v3.1 wich will be released monday.

Yes, BE5 v124 have unlock algorithm incomplete, resulting still locked phone, this will be corrected in v3.1, i received feedback only some days ago about this problem.

Lurker v2.2 had some problems in conecting first time to BE1-BE. Problem solved. Also the bugs ecountered in v3.o are fixed too.

Usually if you have communication problems are due to not good interface or too crapy computer. I tested it on almost all versions on different computers by myself, also i have A LOT of clients witch tested it and all ok. Other thing is that if you have cracked version - have a random check of included database of legit serials - if not correct subtle modifies the timeouts and you will have 100% more communication errors - most of them showing Hyundai flash. Still, serial communication is not as good as parallel one - it differs from computer to computer. I was forced to discontinue the box support due to the fact that my box producer didn't gave me support no more.

In v3.0 and v3.1 i removed random check and put FULL check every time, so it will work no more for non-legit users. Please be sure that your supplier is in my official list of suppliers wich you find on my page.

Legit users should download monday the v3.1 update wich will solve, i hope all current problems. Also i've updated some new versions inside too.

I personally tested it on all XG1 versions supported now, and on 3 BH4 phones from 5. The rest of versions were tested by MCOMM parteners.

Regards...................Wray

[pez8210]

A lot of thanks for your explanation Mr Wray

I can show you my 2 keys for know if they are legit because I get more times this hyundai flash and in my Dell notebook no works at all, and in this notebook works all gsm softs and boxes

My reseller is www.spaingsm.com and I saw that is an official reseller for Spain and I´m very happy with they customers care so I don´t understand why doesnt´work

About interface I tried with 3 different and my partner who has another Lurker has the same problem

I will try with 3.1 version and post here about results but I only have my keys, do I need Usb dongle to run this version?

Best regards

[Uvedovle]

Does anyone unlocked succesfully alcatel 715 with lurker?
Is not working with the cables i have, maybe is wrong pinout...

Some help....regards

[Uvedovle]

@Wray

Please, can you give me the pinout for alcatel 715?
I´m claudio´s customer.

Regards

[Uvedovle]

Problem solved, use external power like NEO_GSM said:
Bfx-5v
Bgx-3v

Best regards

[Wray]

Hi,

@pez8210

I am almost sure what your problem is, and i'm sorry to hear you have this too. Well John sent me A LOT of serials and by mistake i lost some of them, so now i included the serial checks into the wrapping shell. Like i said the software is protected transparent, it not gives error but makes a lot of random checks and destroy the boots. So the software seems that works but it don't. So now, the software beleves that you have cracked version and don't work...

I hope tomorrow, i'll be able to upload v3.1 with bugs removed, versions added and i'll put on my page a serrial grabber to indentify your lost serial and add to software. This is course after John confirmes that he saled to you.

Best regards.....................Wray

[corachon]

Hello Wray...i have the similar problem....i by the usb dongle but it still arrive friday or saturday and in this moment i´m using version 2.2 because 3.0 versión don´t recognize any phones.....you say me in my mail that you will upload the new version today...i´m waiting for it....please give us the upgrade....
I by the Gold Edition from spaingsm (my mail is canonjag-arroba-telefonica.net) and when Joan send to you my detail not send it corrects....i want to register my Standard Version to Jag not to Canonjag.....can solve it.....
Please contact me.

Thanks in advance....

Un saludo
Jag

[evilspell]

Hi,
I also use Alca Wray sw ,i unlocked some fones with the v3.00 and it work good since now.
Some fones was not detected but after 4/5 times it does it .
I like Wray sw,because they are complete.
Br

[corachon]

Can anybody send me the new 3.1 version from Wray´s home page.....i have already registered version but him not reply me (e-mail or this topic).....
I put in his page my username and password for register wrays soft but it say they are incorrect.......my mail is canonjag-arroba-telefonica.net..
Thanks in advance..........

Un saludo
Jag

[pez8210]

Ok Mr Wray if you need any info of me to solve this problem please tell me

[Wray]

Hi,

first of all canonjag-arroba-telefonica.net is not a valid e-mail. Write me on official address and i'll send you the SerialGrabber. Also a username and password, - i cannot publish them freely.

Mail: wraymogg@yahoo.com

Regards..............Wray

[pez8210]

Mr wrayI sent to you today an e-mail with all harware fingerprint info´s and my keys

[corachon]

Wray....you know that i send to you an email from canonjag-arroba-telefonica.net (replace -arroba- with @, i do it for spam)......and you know that don´t answer me.......but best later than never........................
Thank you very much

Un saludo
Jag