PaRoZ
09-22-2003, 17:41
i got a used picstart plus (microship) for sale.
and a one channel oscoliscope.
Handheld Oscilloscope Features
true RMS or peak to peak read-out
dB measurements
markers for voltage and time
auto setup function
DC readout with zero reference function
frequency readout through markers
dot join function
screen hold function
grid or ruler function
adjustable trigger level
trigger mode : normal, auto or single
trigger edge : rising or falling
waveform memory (1 location only)
RS232 data output to computer
auto power off (can be disabled)
handheld Oscilloscope Specifications
maximum sample rate for repetitive signals : 5MHz
maximum sample rate for single shot events : 0.5MHz
input impedance : 1Mohm // 20pF
maximum input voltage : 100Vp (AC + DC)
input coupling : DC, AC and GND
vertical resolution : 8 bit (6 bits displayed on LCD)
dB range : -73dB to +40dB
linearity : 1 bit (of 8 bit data)
LCD : 64 x 128 pixels
time base : 2µs to 20s / div in 22 steps
input sensitivity : 5mV to 20V / div in 12 steps
sine wave generator : 400Hz / 1Vrms // 1Kohm (adjustable)
square wave output : 400Hz 3.5Vpp
power supply : 9VDC / 300mA
rechargeable battery : 6 x type AA / 800mAh
charge current : 90mA
charging time : 14 hours
autonomy : 5 hours
operating temperature : 32°F to 122°F
dimensions : 5.1" x 9.1" x 1.7"
microship picstart plus Features:
Summary
PICSTART® Plus is Microchip's low cost, development programmer. It connects via the serial RS 232 port to your PC and is interfaced using Microchips Integrated Development Environment software package called MPLAB® IDE which is included with the programmer for free. The programmer supports most of the DIP packaged mircrocontroller products available from Microchip. For specific products supported, see the README.PLS file found in MPLAB® IDE for up-to-date information. Included with the kit is the programmer, serial communication cable, power supply, User Guide (in electronic format) and a copy of MPLAB® IDE on CD. Also included is a free copy of PICC Lite Compiler and a sample PIC16F84 microcontroller.
Features
· Operates with PC-compatible host system running Windows® under MPLAB® environment
· Reads, programs, verifies all program and data memory
· Reads, programs, verifies all configuration bits
· Programs and verifies an address range
· Displays, edits, and transfers device contents to and from programmer unit
· MPLAB® project support to automatically download object file to PICSTART® Plus
http://www.multicooler.com/paroz.JPG
mail paroz@gsm-tech.com
if you are interested in this.
this stuff is used.
the picstart plus is only used 2 times :D
this used stuff is in new standard and will go cheep.
and a one channel oscoliscope.
Handheld Oscilloscope Features
true RMS or peak to peak read-out
dB measurements
markers for voltage and time
auto setup function
DC readout with zero reference function
frequency readout through markers
dot join function
screen hold function
grid or ruler function
adjustable trigger level
trigger mode : normal, auto or single
trigger edge : rising or falling
waveform memory (1 location only)
RS232 data output to computer
auto power off (can be disabled)
handheld Oscilloscope Specifications
maximum sample rate for repetitive signals : 5MHz
maximum sample rate for single shot events : 0.5MHz
input impedance : 1Mohm // 20pF
maximum input voltage : 100Vp (AC + DC)
input coupling : DC, AC and GND
vertical resolution : 8 bit (6 bits displayed on LCD)
dB range : -73dB to +40dB
linearity : 1 bit (of 8 bit data)
LCD : 64 x 128 pixels
time base : 2µs to 20s / div in 22 steps
input sensitivity : 5mV to 20V / div in 12 steps
sine wave generator : 400Hz / 1Vrms // 1Kohm (adjustable)
square wave output : 400Hz 3.5Vpp
power supply : 9VDC / 300mA
rechargeable battery : 6 x type AA / 800mAh
charge current : 90mA
charging time : 14 hours
autonomy : 5 hours
operating temperature : 32°F to 122°F
dimensions : 5.1" x 9.1" x 1.7"
microship picstart plus Features:
Summary
PICSTART® Plus is Microchip's low cost, development programmer. It connects via the serial RS 232 port to your PC and is interfaced using Microchips Integrated Development Environment software package called MPLAB® IDE which is included with the programmer for free. The programmer supports most of the DIP packaged mircrocontroller products available from Microchip. For specific products supported, see the README.PLS file found in MPLAB® IDE for up-to-date information. Included with the kit is the programmer, serial communication cable, power supply, User Guide (in electronic format) and a copy of MPLAB® IDE on CD. Also included is a free copy of PICC Lite Compiler and a sample PIC16F84 microcontroller.
Features
· Operates with PC-compatible host system running Windows® under MPLAB® environment
· Reads, programs, verifies all program and data memory
· Reads, programs, verifies all configuration bits
· Programs and verifies an address range
· Displays, edits, and transfers device contents to and from programmer unit
· MPLAB® project support to automatically download object file to PICSTART® Plus
http://www.multicooler.com/paroz.JPG
mail paroz@gsm-tech.com
if you are interested in this.
this stuff is used.
the picstart plus is only used 2 times :D
this used stuff is in new standard and will go cheep.