Nokia 2280 !security code

[sadhwani]

Nokia 2280 showing phone locked can receive call but on outgoing call its asking Security Code, how to reset the security code? Pl. Help

[Moosani]

CHECK THIS

*3001#12345# TEST MENU

CHECK SECURITY CODE IN IT

[mardi]

you must use Phonix service soft,

regards
mardicr

[cyber6]

how ?
:D
forced change ?
where ?
:D



regards
dixie

[mardi]

run phoenix scan product or choose prod select cdma ams
if menu phoenix for cdma show go to cdma-->phone setting & phoenix show menu phone setting -->read all data from phone, in your phoenix must be have cdmaamsmenu.dll

regards

mardicr

[sadhwani]

thanx to All for reply, tried *3001#12345# showing"Unlock phone first" & I don't hv Sw or cable to connect

Regards

Sadhwani

[iMMx]

thanx to All for reply, tried *3001#12345# showing"Unlock phone first" & I don't hv Sw or cable to connect

Regards

Sadhwani

I have same problem :-(

[gsm_boy]

Hello,

Right now only Phoniex service software can do this...

Nothing will help u

If u are in India visit any bright point service center for NOKIA ..they will do it.

Best of luck

:) :) :)

[gsmsikar]

from where can we download the Phoniex Service Software for Nokia 2280?
Link?

[amana24]

CHECK THIS

*3001#12345# TEST MENU

CHECK SECURITY CODE IN IT

@sadhwani
the code it is good did u fix ur phon
ples replay her
thank for all

[gsmsikar]

yeah it is right but u will need to unlock the set first because it will not tell the code or unlock it...

[Moosani]

Use griffin
flash with 3360 flash will stop on mid
then flash with 2280 file
read pm with ok phone
write pm to 2280 phone lock problem phone

works ( not tested)

wbr
Ahsan Moosani

[rrifonas]

I think Griffin does not work with Nokia CDMA Phones, both DCT-3 AND DCT-4.

The only way to unlock these phones (2280, 8280, 3586) is Phoenix CDMA and flash files for these phones, then use the Refurbish option (that only work with FLS-4).

[rrifonas]

I think Griffin does not work with Nokia CDMA Phones, both DCT-3 AND DCT-4.

The only way to unlock these phones (2280, 8280, 3586) is Phoenix CDMA and flash files for these phones, then use the Refurbish option (that only work with FLS-4).

[COMPAQ]

*#7780# *#7370#

[mardi]

For reset sec cod no need fls-4 u can use pkd-1 only or use ph crack

[mardi]

No need fls-4 for reset only need pkd-1 or need ph crack if u have crack

[gsmsikar]

hi mardi
what is the PH Crack , can u give that?
thanks

[Ashwani Gaur]

Pls give link for PH crack
wbr
Ashwani Gaur

[NOKIA127]

For reset sec cod no need fls-4 u can use pkd-1 only or use ph crack

Friend Mardi, I have crackiado the phoenix cdma but the truth I don't understand you your solution, I consult to a friend in nokia and he/she told me something similar to that that your you tell me but the truth has not been able to make anything, that that if he/she told me it is that those files ph are different for each operator

nokia 127

[gsmsikar]

@mardi
y dont u reply ?
please reply..

thanks

[cyber6]

How to reset with cracked phoenix or any FLx or PKD ?
please explain :D
on which menu and which function we can find "RESET" option in phoenix ?
can you give us a screenshoot ?
as i know security code can be found while reading PRI and enter it manualy on phone :D



regards
Dixie

[mec]

Any body can explain me about UPGRADE LANGUAGE in 2280 or other CDMA Nokia?
From indonesia

[mec]

Griffin is support for Upgrade version CDMA?
Thanks

[NOKIA127]

If it is true griffin it doesn't support the telephones nokia cdma dtc4. but with phoenix that is made that one can I unblock the spc, min and the user's code, I up to now have not been able to unblock the code of security. this makes it to the nokias 8280 2280 3585 3586

NOKIA 127

[sixkiller666]

Only Nokia Service Software and hardware can do whar you need !!

All other solutions not work, or will even damage your phone !

You cannot enter in service menu over keypad since your phone is SPC locked !

to read or chnage SPC code you must have R&D version of FLS4S or PKD-1 ! and Phoenix software

[NOKIA127]

Only Nokia Service Software and hardware can do whar you need !!

All other solutions not work, or will even damage your phone !

You cannot enter in service menu over keypad since your phone is SPC locked !

to read or chnage SPC code you must have R&D version of FLS4S or PKD-1 ! and Phoenix software


No, you don't need of pkd1 or fls4, this makes it alone with phoenix crackiado cdma, but for those that I use the fls4 it is to unblock the code of security

Nokia 127

[sixkiller666]

FLS4 has embedded pkd1 dongle, as of cracked phoenix, yes, however i do not condone it for various reasons

[NOKIA127]

non friend, I use multiwindows and in one of my windows I have the phoenix with crack and in the other one I have it with pkd1 and fls4 to make flash, I don't use it the whole time in crack

Nokia127

you find that with this if you will believe me

[sixkiller666]

FLS4 and PKD1 ??, see no use for PKD1 when you have FLS4 ?

[Raskal]

Sofar a pop connector available for this phone, you can use to reset the security code just a simple pop clip. No need pc, no need battery, no need any knowlege. Just plug it in and power on the phone, that's it.

[NOKIA127]

FLS4 and PKD1 ??, see no use for PKD1 when you have FLS4 ?

he is this way my friend, but it is always good to have all the toys

Nokia127

[sunil kumar]

friend i try this way but hand not reset and security code and service code not reset
pl. help me and proper way give me of reset this hanset.
id jagdish_kumar1980@yahoo.com

[tripleh]

hey i have a nokia 3586 cell phone which i damaged by using the *#7370# codes and restored my cell on to the factory settings now it is showing a gps failure contact service provider which was tata indicom
i have been to many places but all in vain
Plz can some one help
i really need it

[sunil kumar]

hi
i need to software of nokia2280 to see the spc code and security code
anybody help me. i exchange the software of pst software of n191 and esn transfer.

[thiagao]

Hi everybody, I bought a Nokia 2280 and i have 2 cellphones and 2 numbers and i discovered under the battery that i have a chip space to put there and i want to know if i can use a GSM Chip there and why can unlock to use CDMA and GSM in the same cellphone?

[sixkiller666]

Nokia 2280 is CDMA phone, so, as well as other models of nokia CDMA phones, it may or may not be enabled for use of R-UIM card, this is similar card to GSM SIM Card, however it is not compatible with GSM standard, So you can forget to use GSM sim card in CDMA phone. !!

Answer to other people, If you need to convert Non R-uim Nokia to R-uim, or to flash different region flashes in Nokia Cdma phones, contact us !

We sell Software and hardware required to make these conversions.

It is original Nokia Software and Hardware and therefore not cheap !


regards

Commselect Inc.

sales@commselect.net

[kumkon]

Beware for reset Nokia 2280 with tornado box.
i try to reset a nokia 2280 for clear life timer ,after this it was no network.
how to repair, doesn any1 can help?

[sixkiller666]

I do recommend use of Original NOKIA Service Hardware and Software !!!

So you and anyone else will not encounter such problems like with third party crap boxes.

regards

Commselect Inc.


sales@commselect.net

[GSMsell]

for indonesian user i can fix nokia cdma phones.
(if u want cheap service than NPC do :D )


Rahul

[lidar]

please rahul...can u explaint how to fixed no network after repair software cdma phone?

thanks

[Fernandowap]

how to make to discover codego of security of nokia 2280 cdma I have pkd-1 and fls-4 and exactly thus I do not know as to make they alguem can help me?

[sixkiller666]

1. your PKD-1 must be R&D version, then you can read SPC code and change it !

2. if your 2280 is R-UIM type, you cannot access SPC code !


regards


info@commselect.net

[thiagao]

I was on o shop yesterday and they reprograming my cellphone Nokia 2280 to use low power because my battery is working just one day... Then, after this programing, when i send messages the other phone receive after 4 hours, somebody knows about this code, know about all codes for nokia 2280? I´ve change the internal software to use IS-2000 but the lag is the same.

[thiagao]

I tried use a code *#7370# but this lag is the same... 4 hours too

[pawan_singh]

i tried *3001#12345# showing"Unlock phone first" & I don't hv Sw but i have dku-5 cable to connect

by mistake i have entered security code wrong several times.now my phone is locked can anyone tell me how to reset its security code.my phone is nokia 2280 cdma available with RIM.ITS ASKING FOR SECURITY CODE.BUT NOT ACCEPTING THE DEFAULT CODE.

[Paavalan]

Hi, I too have same,
Pls Help Me
Regards
Paavalan

[~AKSingh~]

i tried *3001#12345# showing"Unlock phone first" & I don't hv Sw but i have dku-5 cable to connect

by mistake i have entered security code wrong several times.now my phone is locked can anyone tell me how to reset its security code.my phone is nokia 2280 cdma available with RIM.ITS ASKING FOR SECURITY CODE.BUT NOT ACCEPTING THE DEFAULT CODE.

HELLO
PLEASE USE UFS-3 TO READ PM FROM A GOOD PHONE THEN
WRITE IT DOWN TO A BAD ONE START ADD-97.END ADD-98

WBR
singhinfosys

[NOKIA127]

No man, this code killer the rf the phone

Nokia127

[bumzuco]

where i buy this softs for nokia 2280?

[tarana]

Here is the solution for security lock for nokia 2280.
1.read pm from a unlocked 2280 phone ,start add-97,end add-98 ,save this
file.
2.write this pm part to a locked 2280,make sure to click write pm first then
u load the pm file.
------------------and for this all u need a ufs-3.
In a similar manner u can disable prl,tune ur handset damaged by full factory
setting , he....he....he.. only buy ufs3 and you can make 2280 non ruim to be 2280 ruim, i am waranty 1000%

[Victor the]

yup,it's true u just need ufs 3 to flash cdma..........like tarana said.....1000%

[dudulz]

how about 3105 lose signal after reset.... hiks... help me tarana.....
/me already backup the original pm from phone.... and put it back but still no network... help

[Paavalan]

Hi,
i have ufs3, i dont have cable for 2280, what cable i use for 2280,

Regards
Paavalan B

[amitks_in]

Hi freinds can anyone tell me how to unlock/ reset (user code) in 2280 , c131, n191 , Lg-2030. please give me the details

[i-mobile]

@ all

If u want to know WHAT is Security code for ur 2280 then 'Read Full PM' using Third party devices(PRODIGY,UFS or GRIFFIN etc...)

Now Open ur PM using Notepad...

Find Section [35]...
Key 0..
U will Get the Security Code value:

The Default value is 31 32 33 34 35 00 00

Remove 3 from the list, and u'll get 1 2 3 4 5 00 00

ANd your Security code is first 5 character :12345

I wish u'll understand.

Same method for other DCT4 Generation product...

Regrads,
Alim

[amitks_in]

thanks ! I hav not tried it but seems to me it will work, have u tested it before? and do u have schematic diagram of 2280 cable ?

[bedjo]

using dku5 and phoenix cracked is more simple

[i-mobile]

@amitks_in
-Tested 100% working by my self...

@bedjo
-What version of ur Phoenix Cracked can Working with 2280?

[amitks_in]

hi ! i-mobile I dont have phoenix can u tell me where I can get the cracked version of phoenix ? and should I use dku-5 to read 2280 ?

[amitks_in]

Thank u ! it worked ! thanks a lot !

[amitks_in]

do u have any solution for 2030 lg and C-131 motorola ?

[bedjo]

http://cdma.siteburg.com/soft.htm

[dudulz]

need pass key to open archiev on site http://cdma.siteburg.com/soft.htm
thank....

[ganesh_n]

hi i mobile thanks for ur guide.i have done 2280.thanks a lot.can u tell me how 2 get signal in 2280 which was damaged by using ui setting

[~AKSingh~]

hello,

please read full pm (0 to 255) from a good phone(2280) by ufs-3
and write it to a faulty ui defaulted handset.
tested by me working fine

wbr
singhinfosys@rediffmail.com

[francoo]

FRIEND I PASS And APRENDI The same To ME The LESSON THE TRUTH OF THE FORM THAT I TO IT SOLVE IS OF THE FOLLOWING FORM: 1_LEEO ANOTHER ONE I TELEPHONE (OJALA OF The SAME MODEL) And GUARDOS The FILE * TUN 2_LUEGO I READ THE ONE THAT THIS DAMAGED 3 _ TO WHICH THIS DAMAGED HIM POSITION THE FILE * TUN THAT KEEPS PREVIAMENTE(DEL THAT WAS WITH SIGNAL) 4_LO I EXTINGUISH And I IGNITE And HIM AGAIN POSITION * PRI And * PRL 5 _ And READY I TELEPHONE THIS WITH COMPLETE SERVICE ALREADY

[i-mobile]

@ ganesh_n

Use Phoenix, Write TUN, PRI &/ PRL ...

BR,
Alim

[ganesh_n]

i coundt follow properly.pls tell me again properly
regards
ganesh

[celucables]

dear friends

dont confuse!
3360 is tdma
2280 is cdma

you can not use same files to both phones, well if you want to flash 2280 phones you can do it with original phoenix sw, and fls-4 . work 100%.
but you have to pay atention, because you have 2 options
Ruim version, and non ruim version flashes..

good lucky

Ginocell
www.celucables.com
icq 165185251

[scsting]

Diego 2.14 can also do it . i have faced many of these type of sets and i have did it with diego

[inder]

mr. leopard theory is good and simple, 100% tested, also want kind attention for slim

[lugonza]

FRIEND I PASS And APRENDI The same To ME The LESSON THE TRUTH OF THE FORM THAT I TO IT SOLVE IS OF THE FOLLOWING FORM: 1_LEEO ANOTHER ONE I TELEPHONE (OJALA OF The SAME MODEL) And GUARDOS The FILE * TUN 2_LUEGO I READ THE ONE THAT THIS DAMAGED 3 _ TO WHICH THIS DAMAGED HIM POSITION THE FILE * TUN THAT KEEPS PREVIAMENTE(DEL THAT WAS WITH SIGNAL) 4_LO I EXTINGUISH And I IGNITE And HIM AGAIN POSITION * PRI And * PRL 5 _ And READY I TELEPHONE THIS WITH COMPLETE SERVICE ALREADY

Can you explain this again, please....if you want to pm me in spanish. Gracias.

[celucables]

hi...

I think is better to use only one language Lugonza friend, you ara using "spanglish".
Is so dificult to understand.:).

Considero que es mejor utilizar un solo idioma, amigo Lugonza, ya que estas tu Spanglish no permite entender tu mensaje.

Best Regards / saludos.

CC.

Celucables.com

[Muneer Ahmed]

hi can any one tell me from where to get phoenix cracked software. i ll b waitng for ur reply or send me pm plzzzzzzzzzz
br
Muneer Ahmed

[sallupat]

search the forum first