PDA

View Full Version : -=Simple Solution for Alcatel BF3 with No Display=-

-=SanSanyc=-
09-30-2003, 14:16
Simple Solution for Alcatel BF3 with No Display.

Hello member!

After repair dead Alcatel BF3 work, but nothing on Display or Low Contrast.

You need restore original parameters on address 1F8D58 (2 byte)

Standart value: 0001
1M4 value: 0101

and other...


For BF4 i think metod same.

Thanks.

:cool:
Moviltuning
09-30-2003, 23:00
good work
Invader
10-01-2003, 11:18
Thank you very much!
infogsm
10-01-2003, 12:03
good news ! i will try it

regards
KhOliO
10-03-2003, 07:24
thx dear its good work
MPhoneClinic
10-03-2003, 12:35
You need restore original parameters on address 1F8D58 (2 byte)

Standart value: 0001
1M4 value: 0101


How to do all this?? pls explain

thanks
-=SanSanyc=-
10-03-2003, 22:22
I think if you cannot do it, You not need it.

1. Read Original flash.
2. Run HexWorkshop
3. Save 2 byte from address 1F8D58 to1F8D60. Like 0001
4. Paste thise byte to another flash.

All done.

ps. For TZ only Display address D58. For IMEI D00
fonec
10-08-2003, 00:22
thank man
but many peaple ask u help
and explan
MPhoneClinic
10-08-2003, 05:49
thanks
-=SanSanyc=-
10-17-2003, 23:23
Who have another value for address 1F8D58.

Please check and public in this topic for all members. Work around 30 sec.

Thanks.
balu_dark
10-19-2003, 15:05
only first bit checked
try to change any number in XX01 and if lowest bit 1
is one type of LCD but if 0 the other type
wwwq
10-19-2003, 15:49
thx man
fonec
10-20-2003, 13:02
i need ask
if i changed any value can phone dead
or loss network
i wait answer
balu_dark
10-20-2003, 17:32
not dead
i try about 40 value -fone work
but after change value you must recalculate checksumm of teh
with henrich 1.82 and (of course!) save original teh in safe place
-=SanSanyc=-
11-10-2003, 23:17
Address for 511, 512 BF4 Phone For Full Flash: 3FED6C, for TZ: D6C.

Value same: 0001 or 0101/

PS. Need good programer for write soft to Repair Alcatel phone.
nadeem786
11-20-2003, 19:10
Originally posted by fonec
i need ask
if i changed any value can phone dead
or loss network
i wait answer
i flash after flash low contrast and not accepted the sim
please tw l mw and where i find the software hex editor
thnks
balu_dark
11-21-2003, 20:03
put you teh zone back and phone has accept sim-card if you not save oiginal teh in backup-you kill you phone!
Ghlamellah
10-08-2004, 11:38
u r great if this really work
give us a list of Model | Adresse | value to write please