View Full Version : C55 switch off.
The Racer
10-02-2003, 11:52
Many siemens auto switch off while the lights go off, but if the phone is consuming(talking, playing pressing buttons) it never happens. Any solution for this Siemens disease?
FLASH YOUR PHONE WITH GOOD FLASH FILE AND FLASH EEPROM
THEN MAKE LOG , MAP ,
WRITE MAP TO PHONE WORK
genocite
10-06-2003, 08:36
if in some sl45 case, it would be the clock crystal that cause this, also found some case with defective - loose connection bga to board - or lost link from cpu to flash ic
same problem, have a55 auto shut off. the time is random, but about 30 second always off. but when i use it for calling, its okay, why ??
dialog, flash, ram, cpu has been chaNGED.
HELLPPP
The Racer
10-07-2003, 14:47
I did what MOOSANI tell me but still the same problem. I'll pas to hardware repair with this phone if there is no idea. Any way thankx to all.
denbaguse
10-20-2003, 09:22
i have the same problem, my c55 auto shut off, i've flashed it but not working, then i try to change crystal but the problem still the same. Anyone can solve this?
hi I have the same problem with C55 i have changed the whole sofware not use still swich off.Sure hardware problem.HELP if anyone have an idea
The Racer
11-05-2003, 14:46
Solved by myself(talking about switching off when lights go out). Reball Dialog IC!!!
I've tried all of above but still powers off itself :-(
And it seems it is a lot of defective x55 family phones on a market...
The Racer
11-07-2003, 14:28
This is the story, exactly!
1.I flash/eeprom/log/map/load map it to V18(same flash ic hardware=software) and same problem!
2.I change RTC & without testing i reball Dialog IC. Now everything OK at 101%.
not workin in my s55 ??
please help
i have try s55,
if the memory is full (phone book, sms), it's some time powering of outomatic.
after erased it, start working fine.
so my gest if repair with flasing, use ful flash. not just upgrading.
or just empty the memory
sandro-silva
01-15-2004, 13:04
My c55 auto switch off when i plug the cable and try to connrct to it. Is it a hardware problem or simply configuration?
which cable?? Datacable?
And with what software do u try to connect?
sandro-silva
01-15-2004, 19:03
Yes DataCable. very software i try, this probrl occurs, QuickSync, Data Exchange and an unlock software.
jo_jogja
01-16-2004, 09:48
with java enable??
sandro-silva
01-16-2004, 10:19
I really Don't Know. How can i check this.?
I use a cable made by a person and all a try to do is to connect via Siemens Quick Sync. When it gives me the message "Testing mobile phone status", the phone auto switch off.
I have the original cable for S45 and i don't know if it's possible to convert it to a c55 cable to.
Sorry, but i'm new in this technology.