PDA

View Full Version : Pinout for maxon

MovilGroup
10-03-2003, 12:55
I m working with new software for maxon end need pinouts for maxon sg 1000.


Pls help.Tank you.
Yashaka
10-03-2003, 13:01
your phone unlock ???
VIK
10-03-2003, 13:16
@ MovilGroup

He-he , if you can't find right pinout by yourself , so what you can offer in exchange ? :)

VIK
MovilGroup
10-04-2003, 11:16
what do you need


greetings
sas
10-04-2003, 20:07
-------------------------------------------------------------------------
Maxon Epsipon SG-1000 for Sewon and TLC Firmware Downloader:

-- First connect the module and the terminal using the right data cable
(RS232 compatible)
- TX : Transmit Data
- RX : Receive Data
- GND : ground
-- It is also strongly recommended to use the following signal:
- RTS : Request To send
- CTS : Clear To Send
-- Use "HyperTerminal" from Windows
-- Check the baudrate : "AT+IPR?"
-- Configure the speed of the module at the highest baudrate (115200, by default the WISMO is configured at 9600bps)
-- Increase the baudrate (115200bps) in case it has not
be done before: "AT+IPR=115200"
-- Check the software version: "ATI3" ( or AT+CGMR) gives the software version
-- AT+WDWL? gives the downloader version
-- Send the files using XModem protocol.
-- Send the AT command "AT+WDWL" to switch the WISMO on download mode.
-- The module sends "+WDWL : 0" : to inform that it turns in download mode.
-- When there is no more file to be downloaded, the user exits the download mode by
sending the AT command "AT+CFUN=1" (Reset the WISMO module)
-- At the end of the download, execute an AT+CFUN=1 (or hard reset).

SantiPHREACK.
-------------------------------------------------------------------------
MovilGroup
10-05-2003, 21:38
@ SAS


Thanks for the informacion it was very helpful. I would like to ask if you know the pinout for the cable?



thanks
LSDGSM
10-07-2003, 19:21
@sas


ok man, but.... if you dont put the number of the pins, who i can knwow where is tx and rx?


best regards
DUSKnenixs
10-08-2003, 15:18
maybe whe can make a software for unlock this maxons 7922
;)
i opened 2 units inside have amd m490000025 and another have a silicon7 sv5c6416uda flash memory


pinouts
__________
| !!!!!!!!!!!! |
`---------´
1...............12


1 and 12-gnd
sas
10-08-2003, 17:41
MAXON SEWON Flash loaders:
---------------------------------
AMD AM29DL162DT (16MBytes)
AMD AM29DL800BB
AMD AM29LV160BB
Fujitsu 29DL161BD
Fujitsu 29DL161TD
Fujitsu 29DL162TD (16MBytes)
Fujitsu 29DL163TD
Fujitsu MB84VD22182EC (32MBytes)
Fujitsu MB84VD22183EE
Fujitsu MB84VD22194EC
Mitsubishi MGMT161S4TP (16MBytes)
Mitsubishi MGMT321S4TP (32MBytes)
SST SST36VF1601
SST SST39VF800
Uvedovle
01-22-2004, 04:29
In wiich position is tx and rx?

regards
DUSKnenixs
03-25-2004, 00:01
pinouts
________
|!!!!!!!!!!!!|
`--------´
1...............12


1 and 12-gnd
10 - Tx
11 - Rx