Strange problem ...

[bnn]

Trying to repair a C35i (flash type E404, 2x16Mb Fujitsu flash) i killed it after flashing with full flash.<br />After that, I used the standard procedure to revive it but it doesn't work:<br />1. Full flashing with Ziemens Workshop 1.22 (repair_flash.bin and a few others one for C/M35)<br />2. Flashing with fw C3I_1804.<br />3. Writing a IMEI map file.<br />I also try to flash the eeprom only from several flash, but still don't work. <br />Can someone tell why i can't revive the phone and is there solution of my problem?<br />Do you think that's related with the flash type?

[ 18 February 2002: Message edited by: BNN ]</p>

[Asuman]

I had the same problem with my M35I. The battery was empty. I got a full battery from a mate and began with the workshop. Open the Repair bin. And flash only EPPROM. After that flash with SWUP. Go to workshop and CEE-repair. Than change your imei.

[bnn]

Writing an IMEI map file or make CEE Repair with Workshop is the same. I try the CEE Repair, but there isn't a difference. Maybe i need a flash from E404?

[Bobi]

Try this: before beginning of repairing, the phone MUST be TOTALLY dead, no blinking, no marks on screen. For killing use Martech software.

[bnn]

Now the phone IS TOTALLY dead, no blinking, no marks on screen <img src="frown.gif" border="0"> <img src="frown.gif" border="0"> <img src="frown.gif" border="0"> , but i will try. Is there any meaning the file for flashing with martech?