Do you think there will ever be a sharp gx10i imei changer [Archive]

mythanical

10-16-2003, 02:53

Hey!

I REALLY REALLY hope someone will make an IMEI changer for all GX Sharp phones, it seems to in particular be the GX10i that requires it!

Please people, don't give up! Keep on posting and asking, hopefully someone will be kind enough to write us a program :)

I hope Gin and Drugstore are still around, you guys helped alot in getting information on ways of unlocking the phone!

Stukachu, I've sent you a private and email message concerning a possible swap of phones! Please get back to me as soon as possible!

Regards!

Paul_K

10-16-2003, 11:51

There is no legitimate reason for changing IMEI! I hope it NEVER comes out.

Cheers, Paul K

mythanical

10-16-2003, 18:51

Sure there is,

I bought my phone from this guy called Jason... everything sweet, spent about $680 New Zealand dollar on it, and also gave him my Nokia 8250 ...

After about 2 months the phone stops working, I take it into the closest Vodafone dealer and they tell me the phone has been barred because Jason stopped his payments.

They handed his info over to the cops and he will be dealt with+Vodafone will get their money back.

Unfortunately I'm the middle man and will probably lose all my money and my GX10i is worthless...

If I can change the IMEI to one of my older phones thats lying around, then atleast I can start using it again.

If you don't want an IMEI changer, then go to the Nokia forums and raise your opinion there...cause there are many IMEI changers for so many Nokia phones!

I'm not giving up! :mad:

Regards! :)

sysop104

10-18-2003, 08:27

@Paul_K
Of course there are perfectly good reasons to have around IMEI changers (apart from the classic story of the "stolen" phone). In my opinion as in the UK these days "barred from one network" means effectively "barred to all networks" a bar should be legal only if the owner of the phone goes to the police and actually gets a crime number about his/her "stolen" phone. And to do this he/she must provide some more details about the theft. It is not just a phonecall to the provider! A lot of scam (insurance, people who they like to change their phones every 2 months, etc) exists around this issue. They use it to make a LOT of money... even the providers theirselves.

However I wrote this since I am totally surprised from your post. Isn't your site that has T610 patched firmware files from div's site that their ONLY purpose is to allow IMEI change for the very new SE T610? In view of this your post makes no sense.

B.R.

gabbo_21

08-14-2004, 00:56

if the gx10i has its imei set like the later nokia fones, you wont be able to change it as it would be set in H/W in a rom chip and the chip would need to be changed

Aamir_Zia

08-14-2004, 03:00

1 idea

Trade You SET to any other Country ;)

stukachu

08-15-2004, 20:29

if u looked at the date posted it was in december i now have a gx30 doesnt time fly

GSM MIND

08-15-2004, 22:29

hehe well fren the date of posting:)

rotorman

08-18-2004, 12:10

Changing IMEI in GX10i is possible. After playing around, sending a few commands to the fone via serial cable, I managed to change it....problem is I don't know which specific command it was LOL. So I can't be of much use but I can gaurentee it can be done :)

FreaX

08-18-2004, 12:52

@rotorman: Sorry, but I don't belive it. Can you try to remember wich command(s) it could be?

rotorman

08-18-2004, 13:38

Hey Freax, yeah I couldn't believe it either, but I didn't just take the fact that the fone started working again, I also looked at the IMEI and it had changed. I'm putting together a HUGE spreadsheet of AT commands for the 10i and what they do (bought on after reading about your mission, great website there to). 90% of them seem to be standard among all brands tho. Of interest to me at the time were +IMEISV, +RDIMEISP, +RDIMEIPA and +WRIMEIPA. While I gave no values with these commands I have a feeling that it was one of these that somehow re-wrote the IMEI. Perhaps it was the order I did it in. I'm going to work on software to offer all available manipulation, most of all I want to be able to upload games and ringtones via cable. Be kool to work with you on this, can send you the spreadsheet when finished if it will help in your programing efforts.

JD

crux

08-19-2004, 00:31

i dont believe it too :eek:

but i cant test it anymore :(

i dont fave sharp anymore

Of interest to me at the time were +IMEISV, +RDIMEISP, +RDIMEIPA and +WRIMEIPA
what do u think freakx. can u test it?

rotorman

08-19-2004, 11:42

OK I have been able to change the IMEI of my test fone yet again. I know the exact command and it's one of the ones mentioned before. It is rather random tho, how it makes the number is beyond me. I do it without the sim card in but that probably means nothing. Happy playing!

FreaX

08-20-2004, 15:09

@Crux: Of couse I'll test it.

If it works, I'll write a tool, so everyone can change the IMEI.

REPAIRMAN

08-25-2004, 12:26

I take it that it didn,t work.
Regards
REPAIRMAN

rotorman

08-26-2004, 04:05

Don't be so pesimistic :p

Drug_Store

08-26-2004, 04:24

IMEI changing is possible (like was already discussed here on forum). Not work for all models and not all hw versions, but on some works.

Not speaking about this AT commands you are talking about, because I never tested this and never heard someone saying this, but I believe on rotorman. But this makes me wonder how the phone generates new IMEI by himself... ?!?!!!...

Let see what other testers say...

FreaX

08-26-2004, 08:26

It works!!!

I tried it some times sucessfully, I even can choose the last numbers of the IMEI:
Now I'll write a program so everyone can do it.

crux

08-26-2004, 11:33

gr8 then.

we will be waiting for ur program freakx :)

rotorman

08-27-2004, 11:05

Hey I just found out that the IMEI that my fone was set to is the factory default one. This can happen when using a certain RF calibration tool which sharp has advised not to use because of this. All of these fones will, in theory, end up with the same IMEI without any intervention or manipulation of the command.

mobius303

08-28-2004, 04:53

is there a similay way to do this with GX30?

FreaX

08-29-2004, 16:51

Maybe!
I can't test it because I don't have a GX30.
But you can test it if I have released my program.

mobius303

08-29-2004, 18:57

eagerly awaiting your program

FreaX

08-30-2004, 13:09

The IMEI Changer is now availible for download.
On my Website (http://sharp.x-mc.net)

crux

08-30-2004, 14:32

cool. gr8 work :)
.........

Uvedovle

08-30-2004, 14:48

I´ll test it. i have one sharp barred for spare parts :D

Burnt Cobba

08-31-2004, 01:13

not compatible on GX-20

presume GX-10/i only

thanks FreaX for your effort and time mate
al

Burnt Cobba

08-31-2004, 01:18

anyone got the initialisaion command for GX-20 pls?

thanks
al

rotorman

08-31-2004, 04:28

Top stuff Freax! Interesting to note the first few numbers of the IMEI go back to what they should be when using this (if the entire number is set to factory default). What is Single Pass for?

FreaX

08-31-2004, 08:40

Single pass changes the IMEI to a normal one when it looks something like 004400/29/1234656/4.

sysop104

08-31-2004, 17:21

Top stuff Freax! Interesting to note the first few numbers of the IMEI go back to what they should be when using this (if the entire number is set to factory default). What is Single Pass for?

Hi,
So that mean you tested that and works right? I am trying to use it on two GX10 (E) and I am always getting "No responce from phone". I am using an unlock cable (say v.i.l.a.n.i unlocker v3.1 works just fine with it). Can you or the author of the program give some answers to the following:

A) phone needs to be ON when running IMEI changer?
B) phone needs to have inside SIM?
C) what is the correct cable to use with IMEI changer? (schematics)?
D) If phone not need to be ON (so needs to BE OFF) when we press "Init" in the program (in conjunction with when we press phone's power ON) ?
E) What is the exact sequence of AT commands we need to send to a GX10 in order to change its IMEI? Also in order to send an AT comand to the phone does phone needs to be on a special mode? And how we put it on this mode if thats the case? I tried the AT code checker trying to send +RESET but I just see a progresss bar and nothing happens... Needs special cable?

B.R.

rotorman

09-01-2004, 03:04

Drug_Store

09-01-2004, 03:43

Sorry, maybe I´m going to ask something stupid, but does the software generates different IMEI for each phone? Or is it like Sendo Unlocker by Angel, that changed all Sendo´s to same IMEI, and now networks blocked that IMEI, and all phones unlocked with that software are not working on Portuguese networks.

Sorry, maybe is stupid question, because I did not even seen the software yet...

Thanks

sysop104

09-01-2004, 06:12

Works fine on GX10i with standard serial cable. I did not tick Single Pass and the IMEI still went from 004400/xx/xxxxxxxx/x to a standard one with the defined section. I think we are exploiting a bug in the firmware more than using an official command to do it. Fone should be ON, NO SIM, STANDARD SERIAL DATA CABLE. If my theory is right then it won't work on any other model except 10i.

@rotorman
You are exactly the one I wanted to talk to. I did try in the Sharp forum but didnt find you there and doesnt seem that anybody there read posts. FreaX seems to think that you know the correct sequence of AT commands for IMEI change.
At least on GX10 (E) doesnt seem to work and I even flash it with GX10D just to make sure. Can you tell me what is the IMEI AT Command sequence? Moreover I am wondering how one can send a (sample) AT command to a Sharp GX. In old SONYs (before they become SE) you need to have the phone on, and you must put it with a certain program in a special mode *before* you attempt to start sending AT commands and receive aknowledgements. Can you please tell me here or in a pm how to send a sample AT command to a GX10 (say +RESET).

B.R.

Burnt Cobba

09-01-2004, 08:23

@freax & rotorman

mate on which models does this actually work? Do they need to be put in test mode ?

thanks
al

FreaX

09-01-2004, 09:14

@Burn Cobba: I tested i on my GX10, rotorman on his GX10i.
@Drug_Store: No, you type in the IMEI you want to change to.
@sysop104: Phone has to be on. The AT command is for entering the "special mode" (DIAG), and than you can change the IMEI.

Burnt Cobba

09-01-2004, 10:14

@FreaX

sorry for questioning again dude .... is it for GX-10 series only? GX-15,20,30 and family have different AT commands?

thanks
al

sysop104

09-01-2004, 10:24

Hi,
@sysop104: Phone has to be on. The AT command is for entering the "special mode" (DIAG), and than you can change the IMEI.

Can you be more precise? How you entering Diagnostics mode? Do you use an AT command a keystroke or what? As I said I would like very much to know the complete procedure for sending one (any) AT command to a GX10 phone.

B.R.

thegeezer

09-02-2004, 20:34

crux

09-02-2004, 20:47

12. say thanks to freakx :)

stukachu

09-02-2004, 23:43

i started the post so ill finish it,

A VERY BIG THANKS FOR FREAX and team

who has made it possible to change the imei remember it is illegal in many countries so please be careful

Thanks again.

p.s ive got a gx30 now.

sysop104

09-03-2004, 00:41

Great work freax. I've been waiting for this tool for ages. For all those with a GX10 e the tool written by freax worked on mine. These were my steps:

1. Switch phone off & remove sim card
2. Power phone up
3. Connect to serial data cable
4. Run the tool from freax, select correct com port & click 'init'
5. Present imei is displayed with the portion that can be edited
6. Input random choice of numbers
7. Click 'change imei'
8. The phone display changes to what looks like a diagnostic/data page. Phone switches off, the tool prompts u to turn on again
9. After turning on again the tool checks that your imei has changed
10. Phone turns off
11. Insert sim and test

Great job freax!

Hi,
Can you tell me what cable are you using? Does it have external power supply? Can you open the GX10 connector and tell me what is the pinout that has worked with your phone? Suppose we have:

PHONE UP
|
|
KEY PAD
----------------------------------
1 2 3 4 5 6 7 8 (top row)
9 10 11 12 13 14 15 16 (bottom row)
-----------------------------------

It is enough to tell us here something like: pin 1 connects to black, (say), 2 not used, (say), etc ... Especially look if there two resistors 10K from pins 6,7 to pin5.

B.R.

Drug_Store

09-03-2004, 06:06

...
@Drug_Store: No, you type in the IMEI you want to change to.
...

Great ;)

Maybe another stupid question...
Can´t this result in bad CRC, and kill the phone?
Or no CRC is checked? But this would result in some coincidence of appearing another phone with same IMEI... I remember old siemens that had this problem...

Anyway, is a great tool, thank you ;)

stukachu

09-03-2004, 10:58

if u need to find an old imei just find one of your old phones like a 3210 or something like that and use that imei,

nafie

09-03-2004, 16:36

just give tym soon they'll b 1..................................

crux

09-03-2004, 18:03

if you would this thread till the end you would know there is one already :P

skedone

09-03-2004, 19:30

canb anyone help i have tried this soft on a gx10 and gx10i on 98 and xp with a working lead (used it to unlock both phones) followed everything to the letter and all the software says is no respones from phone

any advice

stukachu

09-03-2004, 20:42

have u got the right com port setting. the software even reads my gx30

skedone

09-03-2004, 22:13

yep i have it on correct com settings , is it powered lead needed or normal lead as i have both, in fact if u have sheme of cable u all use that would be great

Burnt Cobba

09-04-2004, 09:39

@stukachu

you managed to make it work also on GX-30? I cant even make it work o GX-20 and the lead works 100% ok for connecting. It is not an external powered lead. Tried on XP,2k erver,98 SE2.

thanks for any help
al

rotorman

09-04-2004, 10:12

Drug store, you will not corrupt the CRC of the fone because the IMEI is independant of the firmware.

skedone

09-04-2004, 11:12

can someone please post there working pinouts of cable so i can check mine as both the gx10/10i dont connect

thanks in advance

sysop104

09-04-2004, 11:30

can someone please post there working pinouts of cable so i can check mine as both the gx10/10i dont connect

thanks in advance

Hi,
Same here m8. Apparently rotorman that can connect to a GX10 (i) even with windows hyperterminal, FreaX (that wrote this proggie) and thegeezer that manage to get response from his phone they have a somewhat different cable from the OEM RS232 that is usually available for unlock. There is simply no other explanation. If some of them wants to open his cable and tell us here the pinout that would be really great.

B.R.

Gsm Solutions Ltd

09-04-2004, 15:51

NOW we can change IMEI - great/, but no after changing the imei ""NO SERVICE**

Any ideas? :confused:

zackeriney

09-04-2004, 17:39

CAN SOME1 PLEASE EMAIL THE SHARP GX10I SOFTWARE TO ZACKERINEY@3MAIL.COM
WITH AN EXTENTION OF 1 EG IF THE EXTENTION IS ZIP EMAIL .ZIP1 AND I WILL CHANGE IT ONCE DOWNLOADED THIS IS CUZ EXE ZIP RAR CDA MP3 WMA WAZ AND TONS MORE FILE TYPE R BLOCKED FRM BEING WHERE I ACCESS INTERNET I THEN PUT IT ON A USB DRIVE AND TAKE IT HOME. I HAVE PM SOMEONE BUT I THOUGHT IT MMIGHT BE QUICKER TOO POST HERE AS WELL AS I NEED IT URGENTLY.

CHEERS
ZACK

Drug_Store

09-04-2004, 18:01

NOW we can change IMEI - great/, but no after changing the imei ""NO SERVICE**

Any ideas? :confused:

See people starting having problems... :rolleyes:

That´s what I tried to say here:
http://forum.gsmhosting.com/vbb/showpost.php?p=829134&postcount=46

Not corrupt CRC, but IMEI can´t be registered on network.
2 probable reasons...
1- IMEI is same as other phone already registered on network
2- IMEI checksum is not right for the rest of IMEI digits, and network can´t accept such IMEI.

Further information to solve this will come... ;)

Drug_Store

09-04-2004, 18:05

I think solution to solve and create IMEI changer reliable, is to find Sharp IMEI checksum algorithm, and add it to write instruction on software.

But is just an idea... :(

Gsm Solutions Ltd

09-04-2004, 18:18

@Drug Store

Thanks

Its ok now, i re-entered Vodafone irelands MCC & MNC in the network settings, then straight away it picked up a signal,
Also i have many broken GX PCBs, simply take there imeis, it dont have to be a Sharp IMEI, use imei from any old board..problem solved but not 100% as the checksum may be incorrect for the network, but there is ways around this.

Drug_Store

09-04-2004, 18:28

This will give a bit of work, but I´m sure a way around will appear ;)

Not even if is testing digit by digit... lol :)

rotorman

09-05-2004, 01:31

Weird that people are getting NO SERVICE. Are you sure your SIM isn't blocked as well? Maybe in other countries there's defined IMEI range that the network will allow but I've had no problems yet AND the factory default IMEI is wildly different to the standard issue one and that also works. I think it would be share fluke then if there was CRC checking of the number that this number just happened to be valid. Would anyone be willing to share a valid IMEI for their country, I'm curious as to what the first few digits look like around the world.

Drug_Store

09-05-2004, 03:29

Humm... Guys we are not thinking correctly... Network must give access to phone from other countrys. I mean, isn´t supposed that the phone works all around europe? So network must accept even if phone is from foreign country.

So must be something else...

If anyone in the will of wasting some time testing, test changing just a single digit at a time, and check witch one is makes network refuse the IMEI.

Like I said above, this needs work and lot of time for testing.

sysop104

09-06-2004, 12:36

Hello,
Just to say, (as I already suspected in a message above), that all the errors we are getting of type "No response from phone" are from bad pinout of cable. While an RS232 unlock cable can have pin2+pin10 shorted this is not correct when using FreaX's IMEI tool. Still this tool cannot change correctly the IMEI as the last check-digit is always wrong and hence networks can reject the phone.

Single pass changes the IMEI to a normal one when it looks something like 004400/29/1234656/4.

@FreaX:
Can you tell me please what is the "WRIMEIPA" command's formula? Where the new IMEI params are inserted? And what is the "Single pass" in terms of AT commands?

B.R.

PS: Attached is the schematics I used. It is an externally powered RS232 cable. Power supply in separate schema. Works 100%

karamusa

09-06-2004, 19:00

on sony ericsson the last digit is also wrong but it still conect to the network so why sharp are diffrent

Drug_Store

09-06-2004, 20:00

Not only sharp... Nokia is different, Siemens is different, Panasonic is different, etc...

skedone

09-07-2004, 01:19

would not using aig not work guys for the imei check problem

zackeriney

09-07-2004, 15:47

hi i use a cable i brought and it works though hyperterminal but when i use the soft ware from the website i get com port is already open or phone not responding if i try port 1. i have port 1 and 2 it is not externally powerd would that make a difference

sysop104

09-07-2004, 20:39

YourPhone

09-07-2004, 20:40

zackeriney

09-08-2004, 15:31

i have windows xp pro sp2 and i verify though hyperterminal cuz i send the phone data backup command to it and i get a blank screen that says user data backup then a number at the bottom

BlackyP

09-08-2004, 16:34

i send the phone data backup command to it and i get a blank screen that says user data backup then a number at the bottom
The BackUp-Prog for GX10 is sending a sequence of AT-Commands.
At the beginning AT+XBAK, followed by many others.
The number at the bottom should be 0.0.7.0 or so similar.

sysop104

09-08-2004, 20:00

i have windows xp pro sp2 and i verify though hyperterminal cuz i send the phone data backup command to it and i get a blank screen that says user data backup then a number at the bottom

Hi,
With your cable plugged try send through hyperterminal AT+XDIAG. What do you getting?

Regards,

zackeriney

09-09-2004, 15:36

does any 1 have any software as the 1s iv tried i recive errors.

Burnt Cobba

09-10-2004, 14:58

@sysop104
got it to work ok on GX-10 and i series. i noticed that it is better to make the change in such a way to leave the final checksum as was before. Thanks a lot mate for your help.

@ FreaX

thanks for this tool. Tried it on GX-20 but when trying to affect the change it says cant enter in DIAG mode.

al

zackeriney

09-11-2004, 15:17

@ sysop104

i get 0.0.7.4 when i put in any command.

sysop104

09-12-2004, 20:30

@sysop104
got it to work ok on GX-10 and i series. i noticed that it is better to make the change in such a way to leave the final checksum as was before. Thanks a lot mate for your help.
al

Hi,
yes that seems to be the solution at the moment. Change just one digit of the last part of IMEI so that checksum-last-digit of IMEI remains the same after that change. I suggest using a calculator for IMEI numbers (that automatically adds the correct checksum digit) to find out which digit we need to replace and to what before you attempt IMEI change with FreaX's software.

B.R.
PS: As for GX20 I suggest to downgrade to least possible firmware version and then test FreaX's tool again. Unfortunately after I put a phone in XDIAG mode I cannot really send any command to the phone, so I cannot experiment and fix this for other GXs.

sysop104

09-12-2004, 20:33

@ sysop104

i get 0.0.7.4 when i put in any command.

Hi,
With your cable plugged try send through hyperterminal AT+XDIAG. What do you getting?

Regards,

Hi,
If you sent the above command and received this then something is wrong with your cable m8. Normally your LCD should become whitish and a lot of text print on it. Just build a cable using my schematics and it will work 100% with your GX10.

B.R.

Burnt Cobba

09-13-2004, 00:11

@sysop104

mate actually the Gx-20 does get in DIAG mode, imei is read ok but still when trying to do a change it is like not being in DIAG mode.

Any idea which is the oldest possible firmware?

thanks
al

zackeriney

09-13-2004, 15:46

Hi,
If you sent the above command and received this then something is wrong with your cable m8. Normally your LCD should become whitish and a lot of text print on it. Just build a cable using my schematics and it will work 100% with your GX10.

B.R.

how do i build cable?

crux

09-14-2004, 01:46

for those who know what i am talking about, you could decrypt gx20 flash and search for AT commands that include 'IMEI' or 'DIAG'

i think diag in gx10i was XBAk or XDIAG

so, probably u will find new at commands in g20

BR

Burnt Cobba

09-14-2004, 11:00

@crux

with what is decryption done pls?

thanks
al

BlackyP

09-14-2004, 13:44

with what is decryption done pls?I use for instances the program "HEX WORKSHOP 4.2".

crux

09-14-2004, 15:00

yep. but that one is too slow.

search for 010editor

its a lot faster

then all u have to do is import a "motorola s-record" file

and use search function to search for at commands

example: search XDIAG or any other known at command

the others will be near ;)

Burnt Cobba

09-14-2004, 21:14

geeez .... like going back at unvirsity times hehhehe at least no assembly this time :D

ok buds will do that then... hopeully will be back with some info

br
al

mp3hot

09-15-2004, 23:38

hi
regarding the schema u posted to us ... do you need to supply pin 5 on the phone with 5v? and if yes is this done through a 10k resistor or not?

mp3hot

PS: Attached is the schematics I used. It is an externally powered RS232 cable. Power supply in separate schema. Works 100%[/QUOTE]

sysop104

09-16-2004, 06:54

regarding the schema u posted to us ... do you need to supply pin 5 on the phone with 5v? and if yes is this done through a 10k resistor or not?
mp3hot

HI,
Pin5 of phone joins directly to MAX's 232 pin16. Hence, to answer your question: pin5 of phone needs 5V without any 10K resistor in between. Comes direclty from the power supply of the cable. The only two resistors in the scheme (value of 10K each) are in between pin7 and pin10 of phone to pin5 of phone (which has as I said above 5V).
Or if you prefer in terms of MAX232 pinout, the only two 10K resistors are in between pin10 and pin11 of MAX's 232 to pin16 of MAX's 232.

B.R.

Burnt Cobba

09-16-2004, 12:27

@crux

that editor is really powerful!

what did you use to convert it to a mot s-record format mate??

thanks a lot
al

REPAIRMAN

09-16-2004, 15:34

When i run it this is all i get.

"This version has expired. Please download the latest Version from http://sharp.x-mc.net."

Any ideas??

Burnt Cobba

09-16-2004, 16:11

seems it has now become a commercial product.

Maybe we can expect more improvements on this nice tool now :) thanks for FreaX.

al

REPAIRMAN

09-16-2004, 19:25

The IMEI Changer is now availible for download.
On my Website (http://sharp.x-mc.net)

Any chance of version of this that doesent give me "This version has expired"
I only downloaded it today.
Regards
REPAIRMAN

mp3hot

09-16-2004, 22:03

Any chance of version of this that doesent give me "This version has expired"
I only downloaded it today.
Regards
REPAIRMAN

i dont know whats wrong with d app , used to work fine for me yesterday , now i get d same error like u . tried to moving date but it doesnt load , any help ?

mp3hot

mp3hot

09-16-2004, 22:41

freax pls solve out this problem . i need app desp :)

bungle_uk

09-17-2004, 00:34

If you go to Frex website you would have seen this :

15.09.2004: The IMEI changer is expired, I wanted to release a new version yesterday but my phone is death. So I will upload the old version tomorow again with no expiration. (FreaX)

Give him time guys, he's probably got more important things on his mind ;)

BR

sysop104

09-17-2004, 10:33

If you go to Frex website you would have seen this :

Give him time guys, he's probably got more important things on his mind ;)

BR

HI,
Of course I agree. I just hope that this time he packs his software with a normal packer (eg upx) and not with Armadillo. Thought armadillo is easy to dump :D still for such a tool to use armadillo...

B.R.

rotorman

09-17-2004, 10:41

Jee guys. If you have a cable that lets you do this why not just learn how to with the commands. The entire process has been posted here I believe. Have some fun and learn something new, and feel more like a hackor in the process (if u like that techy kinda thing)

FreaX

09-18-2004, 21:46

Today I've released a new version, where you can change the speed.

sysop104

09-18-2004, 23:07

Today I've released a new version, where you can change the speed.

HI,
If u mean the IMEI proggy marked with "new" still I download it but getting that it has expired. Can you correct this please and preferably not use Armadillo, I have debuggers etc in my system (as I can imagine others do too).

B.R.

mp3hot

09-18-2004, 23:56

i agree with sysop , prog still doesnt run , mine doesnt say key expired it just doesnt load ( cause i was tampering with the date ) , pls solve this problem thanks mate

ps u also still have the bluetooth virus in your site , the link is http://www.sharp.x-mc.net/index.php?funct=download&id=24

delete it if u can

mp3hot

mp3hot

09-19-2004, 00:09

@freax
i also noticed that the "old" imeichanger.exe is 462,848 bytes and so is the "new" one
could it be that you put an old link in your site and maybe thats why we have the same "key expired" problem ?

mp3

REPAIRMAN

09-20-2004, 13:55

The download for the gx10 imei changer on FreaX website is offline at the moment.
Possibly he is changing the file!.

FreaX

09-20-2004, 17:41

Today I've uploaded a new version again, hope it works.

skedone

09-20-2004, 18:33

yeah its all good mate

mp3hot

09-20-2004, 21:29

software worked great on my gx10i
would like to thx Freax for his amazing work
my friend B for building the schematic
and sysop for sharing with us his working schematic

thx , great work keep it up
mp3

REPAIRMAN

09-21-2004, 12:23

Thanx for update FreaX
it works perfectly

Regards
REPAIRMAN

mp3hot

09-23-2004, 00:08

i got 2 Gx20 sets
1 of them i can read & change imei
the other connects but doesnt display imei it just shows u the empty white line for u to change number , and when u change it will display "Cant enter DIAG Mode" and on fone it will display a white background and alot of text like :
FUNCTION MODE *gX20*
GX20 DIAG VERSION 1
.....

is it possible to change imei on d 2 set?

mp3hot

09-23-2004, 00:25

after several tries i managed to connect d fone and will display full imei but when i come to change it , it will display "can't enter diag mode" and when i retry for 3 times it will go into the white screen (gx20 Diag Vers 1) and it wouldnt communicate anymore.so i remove white screen i have to remove battery . any solution ?

REPAIRMAN

09-23-2004, 12:10

Is the software version of the first one you did the same as the second one?

zackeriney

09-23-2004, 12:20

thanx a lot 4 the update the 1st one wouldnt work on my fone so i thought i would get the second one the 2nd one works for 10 phones chheers

zackeirney

mp3hot

09-23-2004, 19:46

Is the software version of the first one you did the same as the second one?

yes both exact software
a02-005-0147-gx20

REPAIRMAN

09-24-2004, 13:26

I have tried it 2 versions of GX20 with no joy.
I know its not for the GX20 but i thought i would give it a go anyway.

Strange though if it worked on one phone but not the other of the same software version?
perhaps Freax can shed some light on it.

mp3hot

09-24-2004, 14:48

sorry i was wrong neither the other set it doesnt change imei , just tghout it did since it was communicating straight away , so i guess freax tool not supported on gx20 .

mp3hot

Burnt Cobba

09-24-2004, 18:11

hi mp3hot and repairman

the DIAG mode is not entered in GX20 with the same AT command even if it shows so on the screen. Tried on different versions.Honestly have had no time to experiment yet . I think FreaX can add it up in the next version if he wishes :) Hope to have some time to experiment myself and maybe get these AT commands (should be very similar to that of GX-10).

again thanks a lot to FreaX and Rotorman (who actually started this idea) for sharing and actualising this tool. You helped us a lot guys!

br
al

mp3hot

09-24-2004, 19:47

@burnt cobba
thx mate i kinda noticed it ! hope freax would be kind enough to make it possible on gx20 too :p

Burnt Cobba

09-24-2004, 21:01

the step next will be GX-30 and GX-15 i presume hehehe

it is only a guess ;P

If FreaX does makes it commercial i ll be glad to pay and support him for it.... he was already kind enough to give this for free ;)

al

kaholukkk

09-24-2004, 21:48

The IMEI Changer is now availible for download.
On my Website (http://sharp.x-mc.net)

would u tell me what is the password?
thanks

mp3hot

09-24-2004, 22:39

i dont see any passwords , maybe freax made it for a reason ( if there really is ) , hope it doesnt turn out into a "send me" post .

FreaX

09-25-2004, 14:11

Name: Sharp Guys
Key: 00HFNR-XEV25Q-TH51Y8-BWF5MA-BU8CHP-4X7EBX-032DYV-VB9P51-BTNFFU

Sorry for this, but it was the only solution to solve the expired key problem!

I'd like to make a version for GX20, GX30,...
But the problem is that a don't have such phones and only can code it if I have one.

So I decided to offer my flashes not for free (http://forum.gsmhosting.com/vbb/showthread.php?t=141238&page=4&pp=15), so I can buy a GX30. But a lot of people complained about that so I'll make them free again.

kaholukkk

09-25-2004, 14:46

i dont see any passwords , maybe freax made it for a reason ( if there really is ) , hope it doesnt turn out into a "send me" post .

thanks. i tried that on win98. it is work ok and do not need password.
and winXP won't work.
thanks