View Full Version : 2100 dead after windls flashing
I have problem with nokia 2100, I tryied flash this phone as 3330 on windls. Now phone don't respond on flashing, don't power on... dead :(
Erasing flash on windls was very very very fast (i think too fast) about 2s. And after erasing windls had error (phone not respond)
Any ideas how to put life in this phone? ;)
Please help me.
Best Regards
Komarus
I tryied flash with 2100 flasher but phone still not respond :(
HELP :)
Best Regards
Komarus
:) Try to use XPMobiles sofware, it's support for 2100 and 3610, your problem will be solved!
Good luck!
and a better software is GeoFlasher.......use it and 101% power On if there is no hardware problem...
WBR
Syed
Now phone works fine :)
THX :)
Best Regards
Komarus
keyylargoo
10-24-2003, 13:42
@syed how do i get to use geo flasher i have it but no idea on hoew to use it
Thx
Mr.Fl@sher
10-24-2003, 16:09
to use geo flasher
1- remove mark from Auto Recalc Checksums & Safe Flashing Mode and select 2100
2-choose ur full image of 2100
3-go on flashing
4-Congratulations :):)
man when u flash 2100 with dls u was wrong in 2 points :
1- flash chip in 2100 differs than dct3 phones
2- if we consider that its same u should flash it as 8210 for example not 3330 coz it is 2 MB not 4MB :D:D
read phone with nokia tools by jordik and make sure both the imei are same