PDA

View Full Version : DIV Cracked : Which Dongle ?

dannyogolo
10-16-2003, 14:09
Hello all,
I have total tool, but I cant do 4 locks, so I was told DIV 8.4 could do it, but I also know it has to work with some clone Dongle.
Pls can anyone tell me which dongle, and who sells this donge.

Many thanks.

dannyogolo
epic
10-16-2003, 14:26
It's Terminator dongle...
Many people are selling it, try looking at sales section..

BR,
EPic
megone
10-16-2003, 14:28
sorry for you but total tool function only with total tool soft
for your phone and for div cracked use terminator doongle.
KoTsK
10-16-2003, 17:53
DIV cracked --> Terminator Dongle
DIV original --> DIV Dongle
:D :D :D :D :D :D :D
dejo
10-16-2003, 18:14
Originally posted by KoTsK
DIV cracked --> Terminator Dongle
DIV original --> DIV Dongle
:D :D :D :D :D :D :D

DIV cracked --> DIV dongle
SFlood
10-16-2003, 19:01
as i know:
DIV original --> Terminator dongle + smartcard.
KoTsK
10-16-2003, 20:56
my terminator doesn't have sim holder.

is DIV = Terminator + Smartcard?
SFlood
10-16-2003, 22:06
@KoTsK:

yes, original terminator schematics includes smartcard interface and card connector too. But its removed in most non-original dongles.
Mobile Lab
10-16-2003, 22:59
you can use Terminator dongle in Div all crecked versons.

Thanks n Regards
ModaFone
10-17-2003, 01:57
@dannyogolo - if you need dongle contact me ;)

modafone@btopenworld.com
fontelense
10-17-2003, 02:27
Always people trying to sell... Why buy? Hex&scheme is free, build one, it's not so hard!

Best regards
KoTsK
10-17-2003, 09:57
@ SFlood
thx :)

@Mobile Lab
i know ... i'm using DIV cracked, too :)
i'm just wondering that i can use smartcard for my "cheap" t-dongle, so i can enter the Support Area in DIV webpage and grab something, e.g. flash files :D am i right? is smartcard for DIV only used as a "login id"?
ModaFone
10-17-2003, 11:47
ignore the smart card in the terminator dongle, you need original dongle if you want to use smart card.
robba
10-17-2003, 13:21
terminator dongle works get it cheaply from livewirecebu
KoTsK
10-17-2003, 13:55
thx for ur info guys...
feel more stronger now :D
dannyogolo
10-17-2003, 14:32
Thanks all for your replies, I appreciate; Next order from China, its TERMINATOR DONGLE ( I think not more than $100)

Thanks again.

dannyogolo
alecava
10-17-2003, 14:35
FONTELENSE:

Could you post some links where there is the Hex and Schema of the Terminator?

Thx
Ale
KoTsK
10-17-2003, 23:33
http://h*****.nu/~forhike/gsm/Under%20tillverkning/Terminator/
KoTsK
10-17-2003, 23:34
ups! fill the ***** with a l l a h
alecava
10-17-2003, 23:43
I really don't undrstand, what does it mean??
KoTsK
10-17-2003, 23:44
sorry! it seem this forum doesnt allow us to typing THAT word.
simply change the *s with 'a l l a h' (without space & quotes)
gabek
10-18-2003, 04:07
a guy on ebay is selling div w/o the need of a dongle apparently, anybody have any idea if this stuff is floating around??

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3355949348&category=42423
robba
10-21-2003, 09:26
@gabek

if you had been aliitle keen u would have seen this statement just above the heading multibrand unlocker heading:

As you can see this is a mean piece of kit, you will need a terminator data cable with dongle to run this software, and I take no responsibility for any damage you crazy kids do to your phone with this sinister unlocker!!
Rise
10-22-2003, 18:13
hi

i want Div8.4 software can u give me or any site to download it

Regard
Rise
KoTsK
10-22-2003, 22:04
re-check the old post about DIV :) for cracked version ...
Stoyan
10-22-2003, 22:25
Do not bother all members with request for soft that has been released a million times in this forum.
Use Search button
Mojo85
11-03-2003, 08:01
is there a detailed instruction on how to make the Terminator dongle???I SORTA understand it.

I have access to chip programmer (even thought i don't know what it is or how to use it) andhave access to make copper PCP using (dipping the copper thing after drawing the lines...

but can anyone help???

thanx..
gesa88
11-03-2003, 13:54
Download terminator div box hex and schematic 1000% tested,
DIV 8.4 final

http://groups.yahoo.com/group/gsmlee/files/--SONYERICSSON--/
Mojo85
11-04-2003, 21:00
I understand where to get the stuff, but what do i do with the hex coding?????

Like i can make the terminator clip (physically, like build it)

but what do i do with the HEX code, how do i get it to work???

thanx!
forhike
11-04-2003, 21:11
you can use the ip instead

http://213.65.113.105/~forhike/gsm/Under%20tillverkning/Terminator/Single%20sided/

i have made this dongle and it did work with div 8.2 and 8.4

the single sided is easy to make,
just buy a uv lamp and place it in a paper box, then buy the chemics and wow you have a pcp, and soon a working terminator dongle
Mojo85
11-04-2003, 22:15
i ALREADY know how to make the PCB, but what do i do with the HEX code??????

thats what i dun't know how to do...

thanx for the help!!!:D
forhike
11-05-2003, 22:16
hmm

you just write the hex to the pic.

1. put the pic in the writer.
2. open up "the program that you want to write the hex with"
3. Chose the correct config word = 0C0A
4. Press write
5. connect the pic to your dongle
6. Open div and unlock a phone

=)
yaren
11-07-2003, 14:51
Thanks! for explain..
needi
11-09-2003, 02:07
Originally posted by fontelense
Always people trying to sell... Why buy? Hex&scheme is free, build one, it's not so hard!

Best regards


whynot buy for 10$ ......if you put 40$ to make it.
forhike
11-10-2003, 23:04
i did pay about 15 to build my dongle, and that just about the shipping if i'm gona buy one from another country.

but i have to say that my dongle is ugly but it works
blackneck6666
11-13-2003, 17:05
Can anybody tell me how to make div 8.4 run in windows xp

because it alway appear massage like this:
CANNOT START DIVER FOR WIN-LPT PORT ACCESS
CHECK IF : - YOU HAVE ADMINISTRATOR OR POWER USER RIGHT
- FILE NPORTIO.SYS IN SAME DIRECTORY
needi
11-13-2003, 17:57
please dont send multiple posts.You can have ur answer if you have started new thread.thankx