View Full Version : gd68 restart 3 time when power on
baraka42
10-16-2003, 21:31
hello,
gd 68 have strange problem. when power on, phone on then off this is three time on and off and off.
this is hw or sw problem ?
what is solution for this problem ?
thanks in advance.
:mad: :o :mad: :mad:
hi you solved this problem?
unlockmax
01-29-2004, 17:25
Use cb2000 and make "erase memory function'
it helps you
Siemens man
01-29-2004, 21:29
hi man
not work. allways make outgoing call restarting. how resolve this is problem??
thank you
Use cb2000 and make "erase memory function'
it helps you
I solved my problem.Siemens man you have other problem i think it is power amplifier
hello,
gd 68 have strange problem. when power on, phone on then off this is three time on and off and off.
this is hw or sw problem ?
what is solution for this problem ?
thanks in advance.
:mad: :o :mad: :mad:
hi
i got same problem , how did u solve it
mp3hot
Hello Guys.
;) I don't know if it is 100% working but i'm sure 99.9999% it's working
tested on gd-68 and sharp gx10
OPEN THE PHONE(JUST A SIMPLE CLIP)
REMOVE THE BACKUP BATTERY INSIDE THE PHONE(UPPER LCD) FOR >10SEC, PUT IT BACK AND..............
FOR ME IT WORKS EVERY TIME :)
unlockmax
03-15-2004, 22:10
it is not hardware problem, it is software problem.
If chanel box not help try to resold power amplifier and cpu with hot air
I have this problem for work
good luck
it is not hardware problem, it is software problem.
If chanel box not help try to resold power amplifier and cpu with hot air
I have this problem for work
good luck
M8 u don't see the issue
Removing the battery(backup) is the same thing as memory reset with th panasonic program but much easy and the PA resolder might not solve the problem.I tried the Pa resolder and no results but considering the fact that the battery is on the other side............
any way I need to thank u for sharing the "memory reset " trick.
I`ve done it with battery removal