View Full Version : Brand New E700 freez
tanim_1976
10-28-2003, 10:27
Brand new E700 freez. Just like T500 just power on than balllaaammm...... the phone hang up with nothing to do...
Any one can help me to solve this problem?.... dont tell me to Use UST cause its beyond my reach.
proxy_gsm
11-12-2003, 12:40
Hi Mujahid Bhai,
contac with me.
proxy_gsm
Hi,
I need E700 T-mobile keypad hanging problem solution , pls send full flash software, and solutions
WBR
MURTHY
murthydommeti@yahoo.co.in
kirandommeti@yahoo.co.in
I have the same problem . The phone starts and Freeze.
Did you solve the problem.
Pls share with me ....
I try to flash it , but is the same..
Yes E700 and E715 Freezing problem not solved have tried writing full flash with USF and UST Pro also... but then also same any solution for these Lazy phones....
Regards,
Tanvir !!!
www.tanuelectronics.com
it is not software problem, it is hardware.
contact me private
for the freezing issue , see if this works for you, it has worked for me and others...
get a different firmware than the one that is on the phone... and flash it with bin and nand, see if that sorts it...has to be a different firmware than the one on the phone, if it works, then you can flash the firmware that you want
Imran_Khatri
09-28-2004, 21:49
or Try...
#*7337#
100% work on X100 or X600, But not tested on that,,
WBR
Imran Khatri
solution : erase flash with dumper 1.8
reflash with new full 16mb flash
solution tested by me on 30 pieces : works 100%
in most case this problem is in HARDWARE not in software but first step try with soft if the soft can't repair that u must go second step HARDWARE
i have the same problem where ican find full flash mr imran please
decoder5000
10-03-2004, 19:09
same problem
made full flash with UFS but not repaired
any solution PLZ? :confused:
Yeah.. this problems are not solved :-( After Powering ON the phone on (Samsung) Written on the display and stays for some seconds and then phone complete OFF ... Try to find out the solution for it :-) Tried every Possible thing with Softwares ..>..>
Regards.
Tanvir !
www.tanuelectronics.com
any 1 found solution to this? i know its old post, but i got e700 that freezes on samsung start up screen?
Resold C400, clean the Pads and sold a new Capacitor (100nF)
Its an Hardware-Error by Charging-Pump for SIM-Power.
Works good by me :-)
Sorry for my bad english :rolleyes:
cu bvw75
gsmjunction
10-21-2005, 22:09
change crystal and it will be ok
mate how do we identity the crystal ?Can u support with pic.
mate how do we identity the crystal ?Can u support with pic.
yes? plz :confused:
rgrds