PDA

View Full Version : E700 Pinout

Rolie
11-07-2003, 18:44
I need E700 pinout

THX!
debeliamark
11-08-2003, 06:56
Same as S500
VsH-GsM
11-09-2003, 08:48
Same as E100 :D
mobileland
11-20-2003, 01:20
And the same as s700!
Tooler
11-22-2003, 20:34
And S500 and E100 and s700 pinout?
Stoyan
11-23-2003, 02:31
....................
Tooler
11-24-2003, 07:29
Thank You for your answer.
It was excellent! :-)
tybord
11-26-2003, 07:59
rezisor 22Kohm
Tooler
11-27-2003, 18:22
Lot of thanx!!!!
andrew-c
11-29-2003, 19:28
Hi!

Is it working with e700 winimei?

Bye, Andrew.
j0e
12-13-2003, 10:59
T100 pinout is the same as a200 pinout??

Regards, Joe
Gadget
12-17-2003, 23:49
Some help needed here people,

I have opened up my T100 Cable, To carry out this modification with resistors
I have NO red cable, But have a WHITE one...

Below is how my cable was, when i opened it.

Picture States BLUE - I Have White - 14 / 17 / 18
Picture States BLACK - I have Black - 13 / 11 / 8
Picture States ORANGE - I Have Yellow - 2
Picture States RED - I Have Orange - 3
Picture States YELLOW - I Have Green - 4
Picture States GREEN - I Have Blue - 5

This looks nothing like the diagram posted above.

Can anybody confirm that these colours on this diagram are infact correct.
I opened 2 T100 Cables, Both had NO red, But a white.
Both of there pin outs were as i have listed above.

This is URGENT.... I would appreciate your help please guys
Gadget
12-21-2003, 17:38
Obviousley, None of you have got a clue
suma
12-22-2003, 11:00
Hi Gadget,
I also have the same problem and i'm trying to solve it.
Maybe in a day or two.
I'm trying to find the conections to the pinouts on the rs 232 an making my own cable.
I think that the colors don't matter, but i also think that the diagram is only for flash the phone.
Hope this help.
forhike
12-22-2003, 11:54
-=perhaps this could help you=- (http://www.id2.cz/pinouts.htm)

working cables for e700 is

S500,508,E100,x100,x600

happy unlocking
muller
12-22-2003, 23:20
there R 2 types of T100 cable
the 1st 1 has a little PCB board in it
and the second one dose not it has wires straight to the plug

I have tried the 1st one but no joy for me ie ( no test mode )

can someone tell me if it is the 1st one or the second that U have to get to modify to get it to work

PCB or no PCB that is the question


Thank`s Muller
Gadget
12-23-2003, 15:17
The one i tried, Had the PCB inside,

I modified ir according to the schematic, With the 2x R22k resistors

When i plug it into the phone, It shows as charging ??
Gadget
01-02-2004, 04:00
Just to update you all,

I have successfully converted a cable, And done the IMEI on an E700

I used the cable without the PCB, Works 100000%
GALAXY*gsm
01-04-2004, 18:22
I used this shematic and successfully worked 100% with me
note:: I can't get a risistance 22 K but I changed it to 18k and the cabul worked 100% with me on downloader 3

and I have enjoy by many cabules I fixed it with the great shematic u upload.....

now E700 arabic language with me

thanx for help
Mr/*Galaxy
muller
01-04-2004, 18:37
GALAXY*gsm

PCB or no PCB in the T100 cable ??
Mattwood
01-09-2004, 22:53
ignore all colours on Pin out diagrams for samsung cables, i modded a bunch the otherday most had diffrent colour wires,
Only take notice of pin locations which is writen on the board..
Falck
01-10-2004, 18:56
Hi there

Need info of T100 shematic pinout colors

pin 2 orange=Tx
pin 3 red=Rx
pin 4 yellow=?
pin 5 green=+5v
pin 8, 11, 13 black=GND
pin 14, 17, 18 violet=?

WBR Falck
Ikky20022000
04-14-2004, 21:44
I follow the instrutions but donīt works
When short pin 18 to 1,2,3 phone start charging?
whatīs wrong?

BR
Ikky.
muller
04-14-2004, 23:48
I follow the instrutions but donīt works
When short pin 18 to 1,2,3 phone start charging?
whatīs wrong?

BR
Ikky.

no m8 it`s short pin 1 to 16,17,18
simlockmaster
12-16-2005, 22:56
works fine thx :) :)
AjeeB
12-23-2005, 22:18
ohh..almost year !! and this topic back again