E700 unlocker

[Ven0m]

hi. does anyone know what software to use to unlock e700?

regards,

[Blartiartfast]

*2767*688#
Never had chance to try it, but other "known" members say its o.k
It does however clear all of the memory from the phone

[Syed]

*2767*688# works 101% for unlocking E700 ..... unlocked 5 pcs a few days back.. all OK ...

WBR
Syed

:) :) :)

[Arnold Yu]

Yes, it really can work.

[Ven0m]

thanks so much! i'll try it.

regards :)

[Bomber]

yes, works, just tried on my 1st e700 :=)

[tallsaj]

does the phone have to be switched and you input the code and does the phone switch on off automatically. i tried 1 e700 today did not work can you help

[debeliamark]

If you have new version that won't accept unlocking via keyboard - first downgrade and after this use code!

[Zemme]

Hi

I Got A New Samsung e700 From Orange UK Today

Entered The Code, And Fully Unlocked

Works For New Models Also :O)

Zemme

[hakima]

What kind of version are impossible???????????

[jusluke]

use the codes werking 100%;)

[Brka]

oki ... all of this is cool ..

but ... does your unlocked E700 work 100% ?
V200 have problems after unlocking,
so check if :
- WAP works ok
- Picture messages menu is available
both MMS and GPRS work ok


and post results please.

b.r.
ALexandar.

[ssatcom]

Code working 100%

[unlockgod]

i think we now know 10000000000000000% that *2767*688# works

and oh by the way i tried it and wait for it...................... it works!!!

[smartymarti]

i used cades about 1 month agao on v200 ie stackreset and when i did it it reboots when you try and use the wap so its ok but not a 100% perfect so others beware

[otmagi]

thanks a lot guys thats realy helpfull

[garutech]

its important to beware!!!

[.:*CHENNAI GSM*:.]

Code is 100% treat.

@ SSATCOM

Hello Mr. Saravanan How are you doin' ?

Its been long since we met friend, hope to meet you soon .

Whazzup there at your place ?

Best regards

[themobileking]

this code does not work on the newer versions.....

I have tried it on 650-700 phones and it did not work ......eventually i had to use software to unlock it .

It did work on the early versions ...but not anymore

[christmas]

Please Help!!!!!!!!I unlocked an E700 from T-Mobile to Orange, But i can't get Wap to work.Please send me some info.

[smartymarti]

thats one of the problems as i sted earlyer it can cause problem but what do ya want for free??

[sgaucho]

Originally posted by debeliamark
If you have new version that won't accept unlocking via keyboard - first downgrade and after this use code!

Hi,

I hv a samsung SGH E700 mobile and am trying to unlock it in vain.. The code *2767*688# is not working.

If its because of newer software version how do i downgrade it to make it the code work??

would appreciate any help..

thnx in adv,
sg

[raks]

i tried to enter the code *2767*688# but it did not work for me on an orange pay monthly e 700.
can some one suggest next thing i shud try
also please let me know how many times i could try before it gets blocked or something?
thanx very much

[codigo77]

not work in the new version e700.

[codigo77]

not ware solucion for new e700 ?????

[mobileland]

Newest E700 unlock available for free downloads!
www.MobileLandGSM.com
Regards from MobileLand Team!

[ASHIF]

not available there......due to huge traffic...can anybody give another link ??

[LEENO]

Code not work in new version, you must use winimei with S500 cable

Regards

LEENO

[sgaucho]

Hi,

I have a new model of Samsung E700 and tried the following codes to unlock:

*2767*2878#
*2767*3855#
*2767*688#

The first two codes reset the mobile and also accept the SIM cards from different operators BUT after entering the PIN for a diff SIM card, am asked for the OPERATOR´s UNLOCK CODE.

What does this mean and how can I obtain it??

Thnx in adv,
sg

[LEENO]

Your phone was locked phone code, now is network code.
Use E700 Winimei with S500 cable

Regards

LEENO

[PhantomGSM]

where to find the E700 WinIMEI software ?

Regards

[sgaucho]

argh! no way out without the cable ?? cant I use IR ?

[LEENO]

Winimei E700 (http://www.unlockeasy.com/modules.php?name=Downloads&d_op=getit&lid=313)

Works only with S500 cable, tested 100%

Regards

LEENO

[osmanabu]

whats the password to write the imei

[LEENO]

Don't enter password, click ok

[Rise]

HI leeno

I use winimei e700 but not responce than i use *2767*688# it open it
so about winimei i use T100 cable to use E700 which is not work so explain me about S500 cable ]

Regard
rise

[LEENO]

Hi Rise, Winimei don't work with standard T100 cable, you must modify it like picture

http://52samsung.com/bbsnew/UploadFile/2003102423382588240.gif

LEENO

[oldsindbad]

heard or tried S105 winimei and t100 cable

check here

http://forum.gsmhosting.com/vbb/showthread.php?s=&threadid=113757

it might work

happy new year

[sgaucho]

Hi LEENO,

I have finally obtained a S500 cable. I have 2 questions however and wud appreciate any help..

1. In the cable, there is a small black box with a usb like port. Is it of any use?? do I need another cable for it?

2. I have what i believe to be the winImei software. cud u pl give a step by step instruction for unlocking the E700 mobile??

THnx a lot,
sg

[Zemme]

Originally posted by sgaucho
Hi LEENO,

I have finally obtained a S500 cable. I have 2 questions however and wud appreciate any help..

1. In the cable, there is a small black box with a usb like port. Is it of any use?? do I need another cable for it?

2. I have what i believe to be the winImei software. cud u pl give a step by step instruction for unlocking the E700 mobile??

THnx a lot,
sg

Hi There, Sorry I Cant Answer Your Question For You, I Was Wondering If You Could Tell Me What Country You Purchases Your Cable From. Thank's For Your Time

Cheer's

Zemme

[LEENO]

I haven't buyed cable for E700, I make it from original T100 cable like scheme previous. I don't think that your cable work

If you want to test your cable try to flash S500 or E700

LEENO

[sgaucho]

Hi Leeno,

I figure the S500 cable I have works.. I removed the SIM card, connected the cable to my mobile and when I switch it on, a blue screen appears in the mobile with the words TAT MODE.

Is this ok? If so, whats the next step?? On clicking the button RESET PHONE LOCK I c the fwg:

Wait for entering the TAT mode!!
Reset Phone Lock fail!!
Fail in receiving the CREQ(0x49)!

Sometimes I get the message:

Success in entering the TESTMode 18 sec!

Am using the SGH winIMEI Program ver 1.40 2003.12.05 and arranged the cable from a friend here in Portugal.

Would appreciate any further help..
thnx,
sands

[LEENO]

When you read "Wait for entering the TAT mode" press power button.
If don't work ceck cable

LEENO

[sgaucho]

Finally unlocked the e700 !! after playing around for an hour and clicking all the buttons, cud finally unlock the cell phone..

Thnx a bunch leeno and special thnx to mobileland for the software!

cheers,

sg

[Elco]

Help!
I have an E700 new with sw version E70BBWI4
I have tryed to unlock with E700 winimei but not work
Code not work.Phone enter in TAT MODE & winimei ghive error "Error enter in test mode"

Plz help me!!!

TNX!!!

[LEENO]

Push power button every time winimei show "entering the tat mode"

In your Winimei is enabled unlock button? If yes can you send me the exe file?

MY EMAIL (celcom.lab@libero.it)

LEENO

[2xtreme]

Originally posted by unlock***
i think we now know 10000000000000000% that *2767*688# works

and oh by the way i tried it and wait for it...................... it works!!!

Question from newbie:

Howto enter this code?

Phone turned on and without SIM it only shows - - after entering first 4 digits

Regards

[Mobile Lab]

Yes No problem if its show -----
put code *2767*688# without sim card .if its still lock than try E700 winimei for unlocking.

WBR
Mobile Lab

[LEENO]

Read old post

[Elco]

TNX Problem solved

[Aamir_Zia]

Hello Friend,

I got a gr8 Trick to Unlock E700 & E715.
Open Ust 5.6 Cracked & Select Last Models of it (P400) i think
& press unlock.

Phone must be On & use T100 cable for that.

I hope that You peoples like this trick


thanks
Aamir Zia

[hekker]

does'nt work in niuwe versie's

[Mattwood]

I can not unlock E700 using the codes *2767*688# etc...
I've modfied a t100 lead to a s500 lead which will work with a genuine Samsung Flash software but will not work with any unlock software i have both genuine and non-genuine.

Can anyone help me??

[Aamir_Zia]

what type of genuine software

[Mattwood]

To flash the handset i'm using a program called DownVer3.2a, but i can not unlock the handsets after, this is the problem i have... the mod' leads work to flash, but all the unlock software i have got such as UST 5.6. will not work. :(

[mobilshopiva`]

All that u have to do is to mod t100 originall cable for e700,x100,x400,x600 (search old post) and use winimei for e700 (you probablly need to crack it using hex editor,also old posts). When connected you have to clikc on unlock,and maybe on wap button,if have trouble with wap and gprs settings.

Your wish is my command!! Kidding...and please use search button,there are many solutions waiting for all rookies

Regards Macko

[themoomin]

#*7337# to unlock new e700 but u do loose all info this works for e710 too

[Mad4IT]

It seems a great topic here so I'll just pop the question!
Will this software unlock E710 as well?
And where can I find the cable modification? I have the T100 cable.

I used the *2767*688IMEI# code and i have my new sim working but if I try another one lock is still there. Also I got some functions grayed out - can't use them - such as language options and SMS Delivery report.Any ideas on that?how can i have my full menu back?? :confused:

[ammartq]

*2767*688#
Never had chance to try it, but other "known" members say its o.k
It does however clear all of the memory from the phone

Sorry for asking a basic question... but why do you need to unlock a phone in the first place?

[The Dog]

Unlocking a phone which the majority of this forum is about refers to a phone being locked by the network provider so that you cant use a different provider(sim). Unlocking is the removal of this lock!

@Mad4it Just buy a 'non original' cable for the T100 it should work but that code moomin says works so use that instead!!

[ammartq]

[QUOTE=The Dog]Unlocking a phone which the majority of this forum is about refers to a phone being locked by the network provider so that you cant use a different provider(sim). Unlocking is the removal of this lock!

I am a newbie. :)

Thanks for answering the question.

Regards.

[bagors]

HI,

I need Help Please. I am receiving IMEI problem when i'm sending MMS with my Samsung V-200. I have downloaded WINIMEI. How will I use it and what do I need to use it.

Thanks,

[greyz]

If you have new version that won't accept unlocking via keyboard - first downgrade and after this use code!
Thanks friend,
you are correct i have come across a series of these new version that will not respond to codes, how do i downgrade the phone to accept codes?
contact me at greyzr@yahoo.com
WBR
greyz

[hakima]

:D :D :D
hehehehehe!!!
Please use this code for new version:
#*7337#
:cool:

[Tifon]

Works!!, thanks hakima ;).