PDA

View Full Version : SIEM Service Tools (v4.8a) NEWEST UPDATE!!! (HOT)

zorba
12-01-2003, 13:55
New features:
- all new A60/C60 phones supported (new BootCore via "cut track")
- corrected "33% error" phones, and "67% error" phones (A60,C60)
- possibility to repair dead phone A60/C60 ("write eeprom error")
- fast unlock for A60/C60 - with new BootCore
- support 3 new PCBs types in A60, C60 phones
- soft remembers last settings (COM port, phone type, COM speed etc...)
- easy detect device... (autodetect)
- possibility to "Find devices" if box was not connected to PC when program was run...
- removed "wrong soft" if during one software session 2 boxes with different serial numbers was connected
- MC6C (asian version) added
- new flash type A52 (2C16) added
- corrected routines for C55, A55 phones
- new message box (with multicolor and "bold" more important functions) - for easier work

Best Regards

www.martech.win.pl/forum
www.martech.von.pl/forum
ICQ 155440071
gsmsupport.net
12-01-2003, 14:47
Tested with A60 v14 and work great :)

Regards
yaren
12-01-2003, 16:46
is it free or not?
regards..
jboy
12-01-2003, 18:00
It's free for Martech box users
zorba
12-01-2003, 18:17
Correct :D
Lpapp
12-01-2003, 21:13
http://forum.allsiemens.com/download.php?id=335
Many THANKS TO EDWARD1 !!!!
silvester
12-01-2003, 23:38
fast unlock for A60/C60 - with new BootCore

What it means?It means that I can unlock some C60 up to ver.10
and A60 without cutting track???
frico
12-01-2003, 23:54
Originally posted by silvester
fast unlock for A60/C60 - with new BootCore

What it means?It means that I can unlock some C60 up to ver.10
and A60 without cutting track???

So, i wonder too!??
frico
12-02-2003, 00:07
Hi
How I change Com1 at Com2 in this soft?
Soft me signalize ,,Box error.Check cables and restart software."

Thnx
silvester
12-02-2003, 00:44
Originally posted by frico
Hi
How I change Com1 at Com2 in this soft?
Soft me signalize ,,Box error.Check cables and restart software."

Thnx

Hold on!Do you have hardware?
I mean Martech hardware;)

Anybody has tried fast unlock already?
frico
12-02-2003, 01:05
Originally posted by silvester
Hold on!Do you have hardware?
I mean Martech hardware;)

Anybody has tried fast unlock already?

I have not it truly! Can you be specifically please?
I am not experienced with martech.
Thnx
silvester
12-02-2003, 01:49
Originally posted by frico
I have not it truly! Can you be specifically please?
I am not experienced with martech.
Thnx

Mate,soft is free.It's ok.
But to use this soft you need hardware.
This hardware cost something.
About it check Main sales section or use search engine.

Regards
GsmDevel
12-02-2003, 14:45
Is direct unlock or not ???????
FractalizeR
12-03-2003, 13:45
THIS IS NOT DIRECT UNLOCKING FOR new A60/C60 PCB!
mtony969
12-04-2003, 22:58
i have used fast unlock a60 cut track open in less than 1 min