DB unlocking??? Newbie!!!

[Prodigal]

Hiya Guys,

I have myself a network locked DB (BE1 16A).

What is the best and SAFEST method to unlock this thing??

Andromeda 4.8?
Is it safe??

Please let me know some details.....I am eager to get this thing going???

Thanks

Prodigal

[Thomass]

Andromeda 4.8 is 100%.The safest way is at first read flash by the same prog, than unlock.If the phone will not work correctly, you can upload flash back to phone.

[Eerchant]

YES this is 100%.

Happy unlocking and dont forget to backup your flash.

Regards Eerchant

[AMTX99]

this program dose not work with me
on 16c ver but its work with other ver
--
in 2mb flash ,,,try many times to read the flash,,,more than 20


------------------
A.M.TORKI

[Eerchant]

Hello Prodigal and other here is complete way to unlock Alcatel DB, start Andromeda 4.8, read phone, you will see info about phone (version (something as 16A), type etc.) If not there could be some problems - not good cracked andromeda, not good com port that you used, and maybe not good cable. But if there is no problem and Andromeda show you info, you must move with cursor keys to the right and select read flash - andromeda ask you of name of flash so name it or leave default name (is something from IMEI.bin), after that press enter and Andromeda reads flash of your phone (this is for backup only!! if the unlocking is not correct you shold write this flash back to your phone, or with this flash you should change languages with Alcatel DB ****er 2.0 from Bartek inside your phone). When you have backuped flash onto your disk select Clear SP Lock or something, the program will make some progress and the phone should be unlocked, if not or if it is not working you must exit andromeda and run it again and write the backuped flash.

If your phone is 16B dont worry andromeda can 4.8 still can unlock your phone but you must read flash to your disk, start DB ****er and change version to 16A, then write flash back to your phone, unlock it ant it is done. For only cosmetic reason you should read flash from unlocked phone again and with DB ****er change the version back to 16B and again write the flash.

Regards Eerchant

P.S. Before you run Andromeda the phone must be off and if there is some problem wiht reading phone info, remove and give back the battery for a short time.

very tired now....

[AMTX99]

is this proce. work with 16c ver

------------------
A.M.TORKI

[Eerchant]

Maybe yes maybe until now I unlock only ver. 163 16A and 16B no other version. You can try it it is safe - you have working backup of flash

Regerds Eerchant

P.S. If it work on 16C (and D maybe) post info here please- I think that andromeda is the problem no alcatel soft. version but andromeda check the version and if it is bigger than 16A and somebody try to unlock it (not read to disk - this works on all version I think) program say CHECK BATT - it is security in andromeda I think.

[AMTX99]

i found the soluation for my alcatel 16c
i was download 5 bin files from this site http://afilip.kgb.cz/alcatel.html
remm: the password of the zip files is
(( Sannavia25 )) S in upper case
and flash the phones by andromedia 4.8
i have open 5 phones by this bin files
you mast try more than one file to the same phone if the first dose not work .
go head ...


------------------
A.M.TORKI

[Galussa]

To everybody,

16C can be unlocked with BE1SRV v12.3 in 15 sec. Modified version works even on 16D. Also you can upload language.bin files with this soft. Finally, this is the only way to unloch phones with ST flash.

B.R.

Galussa

[baypierre]

it's true that :
Androm 4.8 is for 16A
be1srv 9.3 is for 16B
be1_ok.exe ver 12.3 is for 16C
Where Can I get the modified version for my 16D , the cracked for SS don't work.
Thanks

[stefangrigorov]

http://afilip.kgb.cz/software/alcatelbe1sr_123d.zip