USPU 4.38 where to download ?? plz

[GSM_Hacker]

Plz i need to download the new USPU software ?? any one konow where to get ?

[makona]

i didn't get it from this site , but try and tell me ..
passwd available in post here if don't know , tell me to search for this post in my hd. http://afilip.50megs.com/software.html#s7

Regards

[mashco]

Yes, USPU from this site works, but link is not very good, so use GetRight when you download. Password is: Technologies18 (Case Sensitive)
Regards,

MASHCO

[MaRiN]

Can I 100% unlock Alcatel 170 with USPU 4.38 and can I do it with misiek universal cable wich I use for older Alcatels?

[GSM_Hacker]

Thanx all..
i'll try to download it now .

Best regards
GSM_Hacker

[GSM_Hacker]

i got the software and setup it on my system .

Thanx Meshoz and mashco

but when i used to unlock my db View ver 16B BE3V-1DFLJO1 .... Phone dead http://www.thoic.net/gsm/ubb/frown.gif

any one used this unlocker before with db view ????

any help plzzzz !!!!

Thanx alll

[Ashwani Gaur]

hi,
is your set up of uspu 4.38 working?????
i also downloaded ths same soft for more than 10 times with out any erreors, but when i run set up and installed crypto.cox in c:\windows\system dir; my comp says REINSTALL USPU SOME FILES ARE MISSING.
i am unable to remove this problem may be you can help me.
regards
ashwani gaur
e-mail ashwanigaur@ashwinsmail.com

[scum]

To GSM_Hacker:
USPU 4.38 unlock Alcatel View DB up to v170 - (........,167,169,170 !!!
It don't support v 16B !

[GSM_Hacker]

To Ashwani Gaur :

the downloaded file is 100% working ...

but you have to setup USPU 4.38 into USPU 4.35 directory so .. u have first to get USPU ver 4.35 .. if u read setup instructions carefully u will verify this .

i setup my software into this directory and no error message with it.

To scum :
so is there any way to unlock such db (16B). ?????

and thanx to u

Best regards
GSM_Hacker

[Ashwani Gaur]

sir, thanks for your replay in gsm forum.
i tried each and every thing known to my knowldgeto make it working
but failed.
i eariler downloaded uspu 4.3 from same site last year in dec. it was as in zip format (full)+ crack zip(crypto.ocx).
i installed it and it worked fine.
but when i down loaded uspu4.38 as RARzip.IT FAILED TO WORK FOR ME .
may be i am doing some mistake.
can u please help me to how to install it correctly.
with regards
ashwani gaur

Originally posted by GSM_Hacker:
To Ashwani Gaur :

the downloaded file is 100% working ...

but you have to setup USPU 4.38 into USPU 4.35 directory so .. u have first to get USPU ver 4.35 .. if u read setup instructions carefully u will verify this .

i setup my software into this directory and no error message with it.

To scum :
so is there any way to unlock such db (16B). ?????

and thanx to u

Best regards
GSM_Hacker

[baypierre]

I've got my update copy from www.gsmfactory.com (http://www.gsmfactory.com) , software section .
After unzipping the two files , update & crack , I run the update file , confirmed the 4.35 dir as c:\program files\uspu4.35
then i run the crack.It found 3 "signature" , then all is ok.
I unlocked a db 163 successfully , with vpp linked directly to the 1n4148 diode.

[GSM_Hacker]

TO : Ashwani Gaur
Man i downloaded the file from http://afilip.50megs.com/software.html#s7 and i setup it into my past directory of USPU ver 4.35 and it worked for first time !!!!

i dunno what's happen to u

best regards

[westerna]

Hi, I posted in my web site USPU4.38r upgrade program + crack. You must have USPU4.35 installed and then run this program. I tested it and it works 100%

Best Regards,
Westerna http://westerna.hit.bg