JohnRambo
01-31-2001, 02:32
Hiya everyone!
Alcatel Eraser v1.2.1.1 and v1.4.1.1 works 100%. I've test it with 135.
If you want that soft, just go and get it from here:
ftp://www.gsmfactory.com/618_alcatel_eraserV14.zip
... but you'll need the emulator. Mail me at john.rambo@usa.net and I'll send it FREE.
Once you have them both you have to follow these instructions:
1. Run the emulator (AlcatelEmmu.exe)
2. From menu "Function" unmark "Reset KEYPRO" and "Optimize Datas"
3. Go to "File" -> "Open File" and double click on be4s.kpe. Wait for the error (Unable to insert a line). Click OK.
4. Go again in "Function" menu and click on "Enable Emulator"
5. Connect the cable (phone must be off). Run alcatel_eraserV14.exe and click "Unlock" button.
6. !!! IMPORTANT !!! When the phone is unlocked, remove battery, remove cable and the phone is unlocked and not damaged. That soft will NOT change phone IMEI.
Well, I think that is all http://www.thoic.net/gsm/ubb/smile.gif
Regards,
JohnRambo
Alcatel Eraser v1.2.1.1 and v1.4.1.1 works 100%. I've test it with 135.
If you want that soft, just go and get it from here:
ftp://www.gsmfactory.com/618_alcatel_eraserV14.zip
... but you'll need the emulator. Mail me at john.rambo@usa.net and I'll send it FREE.
Once you have them both you have to follow these instructions:
1. Run the emulator (AlcatelEmmu.exe)
2. From menu "Function" unmark "Reset KEYPRO" and "Optimize Datas"
3. Go to "File" -> "Open File" and double click on be4s.kpe. Wait for the error (Unable to insert a line). Click OK.
4. Go again in "Function" menu and click on "Enable Emulator"
5. Connect the cable (phone must be off). Run alcatel_eraserV14.exe and click "Unlock" button.
6. !!! IMPORTANT !!! When the phone is unlocked, remove battery, remove cable and the phone is unlocked and not damaged. That soft will NOT change phone IMEI.
Well, I think that is all http://www.thoic.net/gsm/ubb/smile.gif
Regards,
JohnRambo