View Full Version : Alcatel Eraser 1.4 Remedy to Problem...
X-Shadow
02-13-2001, 16:02
Hello Guys,
As far as I know, Alcatel Eraser 1.4 unlocked
almost 500 units in my shop with no problem
except of course with non-supported unit ver
137. So if you are having trouble using it,
it is best that you switch the Speed to
115200 bps... So far I do not have
unsupported flash, but I think that there
might be some out there... But funny thing
is, out of 500 units, I never got even 1!
Your cable does not have to be Maxim or
Sippex... Mine is Hin and it uses power from
Serial Port to power up pin4 of phone...
But of course, use a well charged battery...
http://www.thoic.net/gsm/ubb/smile.gif
Best Regards,
X-Shadow
GSM Sales
02-13-2001, 18:55
Wow Man!!!! I now unlock 18 out of the 23 phones that I cannot unlock at first try!!! How do I unlock these 5 phones???? Maybe these are the new flash types http://www.thoic.net/gsm/ubb/frown.gif But very big thanks!!!
Hi GSM Sales,
have you solved your problem with changing
bps according to good X-Shadow's suggestion?
br,
bone
Originally posted by GSM Sales:
Wow Man!!!! I now unlock 18 out of the 23 phones that I cannot unlock at first try!!! How do I unlock these 5 phones???? Maybe these are the new flash types http://www.thoic.net/gsm/ubb/frown.gif But very big thanks!!!
u mean that is another pin connect.i use rx tx and ground.i try with an 136 and program read and write but after all the phone is still locked.
Hello gays
GSM SALES is right about new flash in Alcatel BE4 series.
New flash is MICRON and Alcatel Eraser 1.4 not suport this flash tipe.
If A.E.1.4 can not unlock your phone or for flash say something like a *flash tipe:0MB*
inside phone is Micron flash.
Regards
Hello guys!
I have succesfully unlocked a few BE4 135 and 136 Alcatels, but yesterday I got one 135 which I cannot unlock. When I start Eraser (1.2 or 1.4 - it's the same) the phone powers up instead of start unlocking. Is that a problem with flash chip or what?
Can someone help me?
Regards, Dodo
I`ve the same problem. Someone help us?
Originally posted by Dodo:
Hello guys!
I have succesfully unlocked a few BE4 135 and 136 Alcatels, but yesterday I got one 135 which I cannot unlock. When I start Eraser (1.2 or 1.4 - it's the same) the phone powers up instead of start unlocking. Is that a problem with flash chip or what?
Can someone help me?
Regards, Dodo
GSM Sales
02-15-2001, 14:31
X-Shadow's suggestion only work to some units which cannot be unlocked before... Making 115200 bps was able to unlock some of the phones, but still some cannot be unlocked! I am sure this is different flash maybe... I used same cable for Be1, and I look inside and the IC is also HIN232 with power coming from PC...
Listen to this:
Other unlocker-guy in the city opened the phone which I could't (the phone from the previous post), but using some (live) wires, needles, pins... but not original connector like me!!!
Is it possible that it was only dirty phone connector???
The guy which delivers these phones don't know which soft is he using, is it possible to unlock BE4 135 with other soft than Eraser? I didn't try too much because Eraser works well until that phone...
Regards, Dodo