Password for Eraser 3.6 [Archive]

View Full Version : Password for Eraser 3.6

emsi

05-18-2001, 09:48

Does anyone know pass for Eraser 3.6. Dongle emulator doesn't work anymore. :(

Thanx.

EMSI

Eerchant

05-18-2001, 11:03

Hi EMSI.....emulator not need anymore :)
http://afilip.wz.cz/software/Be4eraser36cracked.ZIP

Password is: AlcaTools23

Best Regards Eerchant

P.S. Credits go to Movilehack for cool soft (I use only lng. changer for B4 from this :) and to Fatum for cool crack...)

anna

05-18-2001, 12:35

working 100% on 138.

hek

05-18-2001, 13:31

can you confirme another time anna.i read a post this morning who said that this soft killed his 138.perhaps he made a mistake.
http://www.gsmfactory.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic&f=8&t=000819

emsi

05-18-2001, 16:04

Hello,

I tried to read lang from the phone with this soft.
When I turned the phone on, I found out that names and numbers in the phonebook are damaged!!!! :(

EMSI

fox

05-18-2001, 18:35

Hi!
When I try to use it in my computer, it says: "Sending application to phone. Please Wait." After that nothing happens! Only the phone turns on.
What is wrong? My cable is "ALT DB/ot221"
Please...I am waiting for help....
Regards

anna

05-18-2001, 20:40

I confirm again that it works 100% on 138,but some phones turns on but don´t know why.
p.s it is better to make backup of ur flash before unlocking.
anna

fox

05-18-2001, 22:06

Hi Anna
You did not answer on my problem! I cannot make it work in my computer, so it does not help me that you confirm that it is working.
Tell me what to do to make it work in MY COMPUTER, NOT YOUR COMPUTER!
I have tested it with different Alcatels 138.
regards

otmagi

05-19-2001, 03:58

hi
the problem is in your cable !!!

for get it work you got to put zener diod

from (gnd blac) to bleu

zener diod 2v7 . i test it

its 100% work ! good luck

fox

05-19-2001, 11:01

Hello Otmagi
Can you please inform me more,-You talk about my cable, which is ALT DB/OT221,
what do I have to do with it to make it work?
You are welcome to send picture/longer explaination for my e-mail:
Habyeb@yahoo.dk

Many regards

anna

05-19-2001, 20:26

I tried again with the phone that powers up when I press be4unlock and it is unlocked now.
U need to try several times
change speed port to lower one,press unlock if phone powers on ,just unplug cable from the phone wait some seconds ,remove battery plug phone and press unlock again(program still working not closed)
just repeat steps if it powers on,I tested on 3 phones and now unlocked.
regards
anna

fox

05-19-2001, 23:22

HI ANNA
I HAVE DONE WHAT U ASK ME TO DO .
BUT NO RESULTS.
IT STILL SAME PROBLEM .
HALOOOOOOOOOOOOOOOOO PLEASE NO ONE CAN HELP ME ?????
I GET CRAZYYYYYYYYYYYYYYY FROM THIS PROGRAM
I NEED HELPPPPPPPPPPPPPPPPPP.
REGARDS FOR ALL

angele

05-20-2001, 01:44

Hi,all
I had this problem with USPU 4.38 and Alcatel be1 and solve him.
Visit www.afilip.kgb.cz (http://www.afilip.kgb.cz) and remade cable,folow remarks.
Regards :)

SaryK

05-20-2001, 18:51

Check Your Cable!!!!!!!!
Good Luck.

ŠaryK

fox

05-20-2001, 20:00

WHICH PC DO YOU USE .
I MEAN ,HOW MANY (MhZ) AND WHICH PROCESSOR (INTEL/PENTIUM I ,II,III)
REGARDS FOR ALL

rayback

05-27-2001, 21:06

If there were no old version of Erazor installed in your PC, Erazor 3.6 will display an error of executing. It provides from OLE ... dll problems,
Please reinstall version 1.4 (it will install all needed files in your windowssystem folder). And you will see your Erazor 3.6 will work (need Emulator)
:)