India RingTone (*.MMF) Free

[Paki Mobile]

I Need India RingTone (*.MMF) Free.
Send Me Link Or Send My Email. jee99pk@hotmail.com
:eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek: :eek:

[the_frightener]

Hi

Contact me i can help u :)

wbr

the_frightener@hotmail.com

[ASHIF]

call me at 0300-9200098 (karachi)

[Mobile Lab]

Use Private Messages for contact eachothers.
otherwis " send me to " contast will start here agian ..:)

WBR
Mobile Lab

[mujie]

Why dont you create your own mmf's from your own songs,very easy.Post here if you need instructions.

[the_frightener]

Why dont you create your own mmf's from your own songs,very easy.Post here if you need instructions.

WOW sir, that's Great ...:) y don't u post the instructions here ...so we can get some useful info from u ...

wbr

the_frightener

[Simple]

Why dont you create your own mmf's from your own songs,very easy.Post here if you need instructions.


yes all want this solution
please post here instructions for all

[mujie]

This is how you create mmf voice tones

Here we go:

1 - you must use*.wav file to create *.mmf
2 - u can use Windows Sound recorder or Audacity or Goldwave to cut the selection you want,normally the chorus of the song.
3 - Open Sound recorder and open your wav file
4 - Play the song until you see the part where you want the tone to start,now click stop.
5 - Click edit and then go down to "delete before current position",this will delete all audio before that position.
6 - Click play again until you see the part where you want the tone to stop and click stop.
7 - Go to edit again and Click "delete after current position",this will delete all audio after that position.
8 - Now you should have a small audio file which you want to use as a tone.
9 - Click effects and click "increase volume by 25%",do this 3 to 4 times to make your tone louder.Now click save.
10 - Now you have to convert sample rate with "cool edit pro or other audio edit software.
11 - Open wav in cool edit pro.(select your wav and doublleclick to open). go to edit then select
"convert sample type". Sample rate is 8000. just below make sure pre post filter is checked off
and raise the bar to high quality - 999. Channels are set to mono and resolution is 16 bit.Click save.
12 - still in cooledit click on effects, then the noise reduction tab then click on noise reduction.
Click on get profile from selection. Then slide the noise reduction level tab so that it is halfway
out of the green section.I set the value to 6, click ok. save file.
13 - Now you can convert this file to *.mmf with Yamaha wsc-ma2-smaf converter.Just drag the *.wav file onto the converter and dont click 8mhz-4mhz,Just click ok.
14 - Now your mmf voice tone is created.

HINTS: - For s300/v200/c100,etc the max file size is 40kb ~ 12sec
For s500/e700/x600/x100,etc max file size is 32kb ~ 8 sec
Songs with alot of bass need bass reduction or this sound will
distort if you make it too loud.

[mujie]

Coll edit pro,now called adobe audtion (http://www.adobe.com/special/products/audition/syntrillium.html)

Yamaha conveerter (http://smaf-yamaha.com/tools/license.php3?ocid=wscma2s)

Gold wave (http://www.simtel.net/product.download.php?id=59197)

[baraka42]

thans mr. mujie,

w.b.r.

[Simple]

it is good information for all
thanks you very vry vy much

[mujie]

Make your *.mmf voice tones vibrate with flashing l.e.d

You cant add vib and led to an mmf tone but you can add it to a 8000 8bit wav file.
after you have the wav file ready here is the tutorial:
-Use ats-ma3-smaf
-use empty midi file
-Open the yamaha program
-Click on the green open folder
-find the empty midi file that u downloaded in step 2 and open it, a window will pop up and click ok
-Click on Window > Stream PCM Assign Map
-Right click (in the Stream PCM window) on the first row and Click New
-find the wav that you want to be your ringtone.
-in the Score Window click on Piano Roll in the upper left hand corner of the window
-Drag and drop your wav file (from the Stream PCM window) into the gray area (in the Piano Roll window)
-go back to the Score Window, scroll to the bottom
-click on the one of the two empty boxes next to the STM
-a window will pop up and where the two white boxes are click on VS to add vib and LED to add led
-File > Save and youre done.

Downloads follow!!

ALL CREDITS GO TO "RAAB HIMSELF"

[mujie]

Ats -ma3-smaf (http://smaf-yamaha.com/tools/license.php3?ocid=atsma3s140)

Use the empty midi file and this program with above instructions.

[Imran_Khatri]

Thanks a lot to give us a informative thing, i have 1 question when i reduce the noice the volume is toooo slow, please tell me how can i increase volume of songs with no noise ?

[mujie]

Thanks a lot to give us a informative thing, i have 1 question when i reduce the noice the volume is toooo slow, please tell me how can i increase volume of songs with no noise ?

INCEREASE VOLUME WITH "WINDOWS SOUND RECORDER" AND REDUCE NOISE WITH COOL EDIT PRO.DONT INCREASE VOLUME LEVEL MORE THAN 3 TIMES IN A SONG WITH HIGH BASS.IN A SONG WITH LOW BASS YOU CAN INCREASE AS MUCH AS YOU LIKE.

[Rahuman28]

Thank you very much Mujie.......

Your instructions are very encouraging, But pls inform as to from where we can have "Adobe Audition" Free ware.

WBR

[matrix1]

here all mmf www.gsm-technologies.net

[SH-Usman]

thx FOR the info mujie
did u use MOBILE MUSIC POLYPHONIC v1.5 if i try to cut a song the volmue is slow & size is about 64kb is there any way to make a high volume & also big size


USMAN JAVED

[.:.GSM-ANGEL.:.]

This is how you create mmf voice tones

Here we go:

1 - you must use*.wav file to create *.mmf
2 - u can use Windows Sound recorder or Audacity or Goldwave to cut the selection you want,normally the chorus of the song.
3 - Open Sound recorder and open your wav file
4 - Play the song until you see the part where you want the tone to start,now click stop.
5 - Click edit and then go down to "delete before current position",this will delete all audio before that position.
6 - Click play again until you see the part where you want the tone to stop and click stop.
7 - Go to edit again and Click "delete after current position",this will delete all audio after that position.
8 - Now you should have a small audio file which you want to use as a tone.
9 - Click effects and click "increase volume by 25%",do this 3 to 4 times to make your tone louder.Now click save.
10 - Now you have to convert sample rate with "cool edit pro or other audio edit software.
11 - Open wav in cool edit pro.(select your wav and doublleclick to open). go to edit then select
"convert sample type". Sample rate is 8000. just below make sure pre post filter is checked off
and raise the bar to high quality - 999. Channels are set to mono and resolution is 16 bit.Click save.
12 - still in cooledit click on effects, then the noise reduction tab then click on noise reduction.
Click on get profile from selection. Then slide the noise reduction level tab so that it is halfway
out of the green section.I set the value to 6, click ok. save file.
13 - Now you can convert this file to *.mmf with Yamaha wsc-ma2-smaf converter.Just drag the *.wav file onto the converter and dont click 8mhz-4mhz,Just click ok.
14 - Now your mmf voice tone is created.

HINTS: - For s300/v200/c100,etc the max file size is 40kb ~ 12sec
For s500/e700/x600/x100,etc max file size is 32kb ~ 8 sec
Songs with alot of bass need bass reduction or this sound will
distort if you make it too loud.
Thanks Very much..

I can only create tones with Vibra..

I wanna convert tones without Vibration...
when I tray to import *.WAV in Yamaha wsc-ma2-smaf converter, displays message "Invaild File Format".

Waiting for your reply..

[imran_k]

Thanks Very much..

I can only create tones with Vibra..

I wanna convert tones without Vibration...
when I tray to import *.WAV in Yamaha wsc-ma2-smaf converter, displays message "Invaild File Format".

Waiting for your reply.. then download the newer version 2.1.0

[n_az_n]

hope every ll be fine . i hve Nokia 6670 B ..its only work on 1800 band .....i would likes to change its into 900 ......... so is there anyone who knows about the hardware .............help me or contect me 03044450744. bye

[lion108h]

Wave to SMAF Converter