Don't respond to ATR, why? [Archive]

OnOff

02-28-2004, 20:11

I've some GSM cards to clone but I can't find ki because some cards don't respond to the ATR command. I'm using SIMSCAN v2. I'm using a phoenix and I've cloned several cards. I tryed to use XSim, it detects the phonix but don't detect the card.
Sugestions wanted :p

samer2

03-05-2004, 19:29

I've some GSM cards to clone but I can't find ki because some cards don't respond to the ATR command. I'm using SIMSCAN v2. I'm using a phoenix and I've cloned several cards. I tryed to use XSim, it detects the phonix but don't detect the card.
Sugestions wanted :p
i have the same proplem

SirGraham

03-06-2004, 09:30

Hi,

What crystal do you use in the Phoenix?
And what Vcc use?

Regards,
Sir Graham.

http://www.endorasoft.es/avatars/Logo.jpg (http://www.endorasoft.es)

WEB: http://www.endorasoft.es
FORO: http://www.endorasoft.es/forum
FTP: ftp://endorasoft.es Login: public Password: public

samer2

03-06-2004, 17:33

i am using ludiphoenix ii you can see al you wont from this site
www.geocities.com/ludiphoenix
i am waiting thanks

samer2

03-06-2004, 17:35

and this the com setting i hope it is usefull

1 CD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR not connected to the Ludiphoenix
7 RTS
8 CTS
9 RI not connected to the Ludiphoenix

SirGraham

03-06-2004, 22:21

Hi,

You need configurate (with switch I suppose) the crystal of 3.58Mhz in phoenix mode....

and try again...

Regards,
Sir Graham.

samer2

03-07-2004, 00:26

thanks iwill try again

OnOff

03-11-2004, 16:30

I'm using XT 3.58Mhz. I tryed to use diferent XT but they don't work. It's very boring because it's very slow to find Ki. I'm using a P4 2.53GHz.