View Full Version : R210 Dead after using a bad quality chargerr
GSM SNIPER
03-06-2004, 15:45
My R210 dead after using a bad quality charger . I tryed to flash IT . When the downloader is sending flash the screen makes flash light .But in the End of the Operation the phone steel sleeping(dead) .
What can be the cause please ? What IC or components Do I change to revive my phone please?
.::Moby World::.
03-06-2004, 17:34
do not use this type of cables
from el djannane de setif
reflash it with a good one and u will see
GSM SNIPER
03-06-2004, 18:00
You recognized me !!!!
Thank you mohamed How is the weather in FERDJIOUA ?
last week I visited SALAH and He told me that you have leave Setif .I am really touched .
He gived me your phone number . I will call you If I will have problem !!!
For my Problem It's 100% hardware (not software )!!! I am sure . Because i tryed to flash It around 5 times with different flash (french ,english, italiano etc...) and different versions . But the phone still dead .
your problem was hardware,
check E61, is a five leged transistor close to the charging jack,
they are three of them there,
change the third one from your left,
even if it does not look defect.
now you can flash phone again,
since you have flashed it badly befor.
note: you can also get these transistrs from nokia 3310 PCB,
good luck,
gibso
your problem was hardware,
check E61, is a five leged transistor close to the charging jack,
they are three of them there,
change the third one from your left,
even if it does not look defect.
now you can flash phone again,
since you have flashed it badly befor.
note: you can also get these transistrs from nokia 3310 PCB,
good luck,
gibso
I might be hardware problem. the flash ic must be damaged.
cellularry
03-08-2004, 22:36
R210, R220 and all this series when power off after using bad charger or LG charger you have to change E61 next to the charging port and 100 % they will come on again.
boldlink2
03-18-2004, 11:54
R210, R220 and all this series when power off after using bad charger or LG charger you have to change E61 next to the charging port and 100 % they will come on again.
remove e61 the third one no need to replace charge battery and power
phone
boldlink2