Download Sagem Code Reader Switcher

[Invisible]

hi,

download this tool and forget once of all to copy, move and all about downgrading and upgrading the dongle, a quick and clean way to work with the cdr dongle

Download tool here (ftp://195.114.202.20/pub/rober/sgs.zip)

best regards
Invisible

[c0c0]

nice tool
:D

[Fre3 Crack3r]

Working great . . :) thanks

Regards . . :D

[BadUnlockers]

Is that meant for Original or Cloned Dongle Users???

[bungle_uk]

Of course its for cloned dongle - why would you want to downgrade an original, geeeze

[frenchi]

hi,

download this tool and forget once of all to copy, move and all about downgrading and upgrading the dongle, a quick and clean way to work with the cdr dongle

Download tool here (ftp://195.114.202.20/pub/rober/sgs.zip)

best regards
Invisible


Very cool :) and also working just great
Great job bro ! ;)

Wbr
frenchi

[BadUnlockers]

Thanks for the reply. Then for Cloned Users Carry On ;) ;) ;)

[PhantomGSM]

better if someone make a addition to v12 software to make automatic reset of counter :D

Dreams lol

Regards

[bakarioss]

It work with any Sn of any cloned dongle? thnk u

[Netbazaar]

Hey, you´re the man

Thank you, grat job.

:)

[foufou]

big thanks for this soft

[blaiseid]

link not working now, says YOU ARE NOT AUTORISED...

[YourPhone]

Excellent tool works 100000% my counter was on 65545 lol, now its back to normal. :D

[Invisible]

hi,

link works fine, when ftp server reach max limit it gives that kind of messages,
just be patient and try later ;)

best regards
Invisible

[gsmkiss]

But does it work really with any kind of serial number? Because i was thinking that update file of SCR was not the same for all serial numbers ?

[soft@man]

tnsssssssssss
Mr: Invisible
++++++++++++goooooooddddd soft +++++++++++++++++

[mobymaster]

HI,

I have found this does not work on all dongles.

I have tried it on JICs black dongle and it doesnt work when tyring to upgrade to v12, dongle not find.

[hitibiti]

this soft worck only for id 48605508

[Invisible]

hi

software is tested on public hex 18xxxxxx,
about Jic black dongles never saw that, perhaps that dongles working with modded software,
anyway this is just "temporaly" solution, I am working on real solution

best regards
Invisible

[hitibiti]

@ invisible
thx for your good solution but have you HEX for sagem reader V12 my be this hex can solv this problem about dead dongle
:)

[mtony969]

@ invisible
thx for your good solution but have you HEX for sagem reader V12 my be this hex can solv this problem about dead dongle
:)
i have big problems always with the orig Dongle ,

[hitibiti]

@mtony969
me to freind , i have problem with original and cloned dongle , wen i try to write hex V10 ,using ponyprog , alwase say error in main module , i can't resolve this problem

[MindPower]

After use this tools i have a/m message. My clone s:n is 48605519 from Gsmunlock. Please help need to repair it urgently.

regards

[Nhatcuong]

my clone dongle was died after up tp v12.

use this sw to down to v10, it's creat a file name's 18605508.* and still can not found device. even on V10 the box is not working

did I update correct ? any help please.

[Invisible]

hi,

if dongle not working you have to burn correct hex, this program will not help.
Also don´t let counter go upper than 3, this will keep box safe ;)


best regards
Invisible

[YourPhone]

Has anyone tried version 13 on their cloned dongle, I am not sure whether to risk it on mine or not, surely if it kills the dongle I can rewrite the HEX and all will be ok? Let me know

[hitibiti]

lesen to me all member for " device not found " only solution is to reprogramme your atmel16L it's the only solution , for other message like "Error in main module...." youi must uopdate your dongle and it will be worck normaly (but after 7 unlock she day :D)
if you ahve serial for your dongle is 18605508 use sagem switcher in forum

[GSM MIND]

hello mates

error in main module contact saller for update msg in my sagem code reader


all i have same problem me using also sagem swichter but when i press do job it appear the same error masage.

[hitibiti]

waht serial nuber for your dongle ? because sagem switcher is worck only for serial :18605508

[GSM MIND]

48605509 is the sn

[YourPhone]

48605509 is the sn
Need to reprogram with 18605508 hex

[Gsm2Extreme]

hi,

if dongle not working you have to burn correct hex, this program will not help.
Also don´t let counter go upper than 3, this will keep box safe ;)


best regards
Invisible


I have cloned dongle with SN 18605508 but it always dies after 7 unlocks...
I have to reprogram with free hex... so this solution doesn't work even if you keep counter under 3

[misiniku]

After trying to upgrade to a v12 now it says Error in main module.

The serial number which appears is: 28605509

Any idea? Should i reprogram Atmega or there is any possibility to flash it?

regards...

[maybe]

After trying to upgrade to a v12 now it says Error in main module.

The serial number which appears is: 28605509

Any idea? Should i reprogram Atmega or there is any possibility to flash it?

regards...



I have a Clone with the same SN have you Update File for V10 ?

And Update your Clone again.

[equinoks]

I have "Error in main module" problem on dongle with S/N 18605508.. i tried all updates, switcher... but always same problem ? is there any steps or solution to follow ? thanx :)

[GSM MIND]

how to reprogram with 18605508 hex plz guide me step by step i need ur all kind help .

[YourPhone]

I have written a step by step here
http://forum.gsmhosting.com/vbb/showthread.php?t=133583&page=5&pp=15

[.:hack3r2k:.]

Hehe...

Good job.. Start pasting here all unknown cloned serials and some ppl will get happyhttp://forum.gsmhosting.com/ubb/biggrin.gif

Br;)

[Sonia]

@all in this thread

Guys, are you so stupid to post your s/n? Original dongle users, you can lose your future updates!!!!!!!!!!!!!!!!

WBR
Alex.

[equinoks]

is S/N 28605509 clone ?!

[47eleven-t]

is S/N 28605509 clone ?!


possibly not coloned yet ,but could be in future.

[YourPhone]

is S/N 28605509 clone ?!
Its cloned I spoke to someone today with the same serial and 3 unlocks dead

[Tygiel]

It's very easy to build interface to fast reprogram atmega :] . You can do it in 60 seconds. :P :P

regards!

[47eleven-t]

which programer will read hex from original dongle??

bcz these pony and api does not read protected atmega.

some idea if u want to share ;) ;)

[Tygiel]

hehe you don't read flash and eeprom from dongle because it's protected - i know why :) Maybe exist such thing for this... :P

[47eleven-t]

hehe you don't read flash and eeprom from dongle because it's protected - i know why :) Maybe exist such thing for this... :P


ok

i had tryed to read orginal,,,but always fake hex & eeprom.

if u know some thing plz send me a mail.



andyfrier2000@yahoo.com

[Tygiel]

Why you want read content from orginal dongle? It's exist free hex. If you want to build another one - you have all for this for free.

[Windziarz]

hi,

download this tool and forget once of all to copy, move and all about downgrading and upgrading the dongle, a quick and clean way to work with the cdr dongle

Download tool here (ftp://195.114.202.20/pub/rober/sgs.zip)

best regards
Invisible

Hi can you do the same with newest V13
to have v10 and v13 in one prog??

B.R. Windziarz

[47eleven-t]

Why you want read content from orginal dongle? It's exist free hex. If you want to build another one - you have all for this for free.


just for the sake of knowledge or for advace experemnts. ;) ;)

[simlockman1]

Thanks you my friend

[ThaDevil]

equinoks
No Life Poster



Join Date: Feb 2003
Posts: 706
Member: 21508
Status: Offline
is S/N 28605509 clone ?!


yeah this is clone i have the same serial nummer

[BadUnlockers]

From all i seee, I have an Original Dongle, with serial no 18605508 which others also have. whatz really happening?? I have unlocked 4xx fones with itz working fine,
is it that mine is a clone or what?? plz someone tell me

[george gsm]

hello friends,
the prog work well. good work, invisible,
regards,
geo

[dannyogolo]

Hello all,
I know his sounds weired, but out of frustration I got a clone, now I need a software that works with it.
Can someone give me link, if necessary, link to all Sagem CDR clones.
Mine came with test jigs for test point.
Thanks

[Mansoor]

I have the software but it is already at 7phone I fear it might kill you dongle unless you know how to up-down greade it but for me I have failed to do it i have the switcher but always gives me eroor it serial no 28605509 CDR

[Mansoor]

Thank invisible but your files say no admin privilege do samething about it my dongle is already at 7 phones it is serial no 28605509 with cdr ver 12.1

[GsmProf]

Hi all,

s/n 28605509 is working serial number for V12.1 and V13, but not work in V14. I have patched this Hex for this s/n. Everybody who have this serial have a Tele-way Clone Dongle and this Dongle will not die after xx locks. My own Dongle have round about 50 phones with this s/n
In V14 it does not works, always connection error and if u update dongle with counter on 1 dongle dies without one unlock

But have another serial wich works in V14, everybody have Hot things to exchange contact me, it´s not free

WBR

[hakima]

Hi all,

s/n 28605509 is working serial number for V12.1 and V13, but not work in V14. I have patched this Hex for this s/n. Everybody who have this serial have a Tele-way Clone Dongle and this Dongle will not die after xx locks. My own Dongle have round about 50 phones with this s/n
In V14 it does not works, always connection error and if u update dongle with counter on 1 dongle dies without one unlock

But have another serial wich works in V14, everybody have Hot things to exchange contact me, it´s not free

WBR

:D :D :D :D
This serial 18605508 can be updated with Version 14 normaly !!! :D
And if U want to change serial number of clone box I can help U with 100% free solution!!!
WBR!!!

[YourPhone]

how to change the serial?

[hakima]

how to change the serial?
Pls use search fuction then U will have that hex file!!! ;)
Or U can contact me via ICQ then I will send it to U!!! :)
WBR!!!

[YourPhone]

i have the hex but in your message it says "changing the serial of your cloned box" does this mean you know a way to alter the hex to input a serial of our own choice?

[GsmProf]

But with this free s/n u can´t do more than 3 unlocks, than dongle dies! U have to reprogramm this after 2nd try, also if u have a connection error this is one try!

WBR

[hakima]

But with this free s/n u can´t do more than 3 unlocks, than dongle dies! U have to reprogramm this after 2nd try, also if u have a connection error this is one try!

WBR

:D :D :D
Why must reprogram when SGS still work well????
:D :D :D

[GsmProf]

I have full working hex, that´s better way to work with that unlocker :D

@ YourPhone: He means he can give u only hex with free s/n and than u can use sgs to make more than 2 Phones, but this is ugly solution

WBR

[YourPhone]

if we could change the serial then our problems may be solved, does anyone know if the serial is in the hex or stored on chip?

[Jackmaxo]

hello, we can compare to Sn files, so we can found SN place to change it...
I need help !!! 2 hex files for 2 Sn ..
thanks

[YourPhone]

i have 18605508 there are many more cloned numbers mine was 4xxxxxxxx before programing 18605508 hex, this is the only public hex i have

[chotky]

first sure the sn is store on the hex if we need another SN must change hex but it's its impossible for the momment cause there is only hex with sn number 18605508 are public so must wait or maybe exist other hex but secret cause if sn are public gsminfo.pl gone stop them maybe

[Seedy]

Going back to the original post, if i use the switcher V10 then V12 every time I unlock a fone, should the number of fones unlocked counter on the program reset as well or does that just continue?

Only asking this as mine is at 6 !!

Any help appreciated

[YourPhone]

counter will reset every time you downgrade or upgrade :)

[Seedy]

So why does mine not do it ? It just increases after each unlock. Is there any method of using the switcher ? I am just pressing v10 Do Job and then i get device error - turn off and the V12 do job and then unlock

What does the device error mean ?

[moustafatch]

i have dongle with S/N 18605508

i just update it to v14 without any proplem and now countre is 6

i can't wait tell i unlock one more phone to see what will happen for my dongle
hehehehehe

can it be dead next unlock ?
if yes how i can make my dongle save to not dead ?

[Farzina Manji]

Hi,

The link does not work my e-mail is farzina@mwanza-online.com

[Ionel]

Can someone send me a good hex and schematics
Tnx alamareio@yahoo.com

[sysop104]

Can someone send me a good hex and schematics
Tnx alamareio@yahoo.com

HI,
Please go here and download:
http://forum.gsmhosting.com/vbb/showthread.php?t=161896

B.R.

[Mobile Master Pk]

:D nice job man and nice tool for sagem

[Ionel]

Tnx' mi friend .

Br Ionel

[[MoOkIe]]

@fasher1

Do you know you can edit/delete your own posts? ;)

I deleted the three posts you did saying the samething...

BR