View Full Version : Dead AOT 701
After flashing the phone can"t power on. I can read and write flash (I have backup, I flashet it, but no success).Please help!
Did you remove batery after flashing?
[quote]Originally posted by ...:::::L¤E¤G¤I¤J¤A:::::....:<br /><strong>Did you remove batery after flashing?</strong><hr></blockquote>
I have backup, but after flashing it to phone it can't power on. I found some problem: I cant change first 64kB from flash. Probably I need other flasher ( different from MCOMM)?
Hi.Sometimes it happens,when you select 2 Mb flash<br />size.Almost all Be5 have 4 Mb flash inside.<br />Regards,Vygis
[quote]Originally posted by vygism:<br /><strong>Hi.Sometimes it happens,when you select 2 Mb flash<br />size.Almost all Be5 have 4 Mb flash inside.<br />Regards,Vygis</strong><hr></blockquote>
First I read 2MB flash.Then I selected 4MB,but at 50% flasher says "Read ERROR".So I decided, that the flash is 2MB. The most important problem is, that I can't write propely first 64 kB of flash.I tryed to write another BE5 flash and after reading, first 64 kB were unchanged.The flash ID was: 989C. Is it possible, that the MCOMM can't read and write this flash properly? I need flash BE5 v124 (from Bulgarian GLOBUL if possible).
Alcatel MCOMM says: flash ID [989C]. Soft by EMMSI says:unknoun flsh type and then hangs up. Is there any read/write soft for this flash type?