BE4 Read/Write flash problem with Celeron ???

[Svetli]

He to all.

I have too PCs:<br />1st is with AMD 500MHz 128MB RAM and MB ACORP with chipset ALI<br />2nd is with Cel 950MHz 256MB RAM and MB ZIDA 815EP with internal Sound Card

i use 'BE4 Flasher by GSMBoyM v1.2' and read/write many Alcatel 302 phone with 1st PC. problem is with 2nd PC. unable to read/write flash ?<br />when start reading flash after 1-2% software says to check battery and stop. but when i connect phone to 1st PC i read flash w/o problem.<br />i use the same hardware with external power, that i use for all alcatel phones BE1-BE5. i use this hardware from 1-2 years and now problem with it.

can anybody help for this strange problem ?

regards Svetli<br />ICQ 37901019

[HFP]

No problem in Celeron...problem in MB i815 <img src="smile.gif" border="0"> )<br />use i440BX .<br />WBR.<br />Peter

[Invader]

I have Ñeleron 800 motherboard chaintech i815<br />Cable with external power

GSM Boy flasher works fine (read/write - I use flasher v1.4), mcomm's flashers works good only for writing (I can't read flash).<br />BE4 reader by S2 gsm - works good for flash reading.

Use 44oBx motherboard - all soft will work fine

[Svetli]

10x guys.

I will change my MB imediatly ! F-cu-K this stupid i815xx chipset <img src="smile.gif" border="0"> <img src="smile.gif" border="0"> <br />Before one moneth I use MB ZIDA v693 w/o problems, 1st with Win98 SE then with Win XP Pro. Then i change MB with ZIDA i815ep and Win XP stop work !!! Every time go to blue screen with text that says "...remove all new hardware. Start CHKDSK /F and try reinstall Windows again..." <img src="smile.gif" border="0"> <img src="smile.gif" border="0"> but if I remove my MB then how will work my new PC <img src="smile.gif" border="0"> <img src="smile.gif" border="0">

regrds Svetli

[legija]

I also got this XP sh***t, it works fine for some other things, but for unlocking? Nope...<br />Go back to win98 or winME.<br />If you want anyway keep using XP, start comp i SAFE MODE using F8 key, and choose Safe mode on startup menu.<br />I hope this will help you, if windows XP manage to start, open device manager and remove old stuff - hardware from old MB -, and restart you comp.<br />Or you can start setup again and choose repair option after first restart during instalation,but this is fof "power users"...

[Svetli]

<img src="smile.gif" border="0"> 10x for answer<br />i know that for XP - not work for unlocking.

i found solution for my problem <img src="smile.gif" border="0"> - i will change MB with other w/o i815 chip. today i test my software and hardware with one old PC intel 233 MHz 8MB RAM <img src="smile.gif" border="0"> all work 100%.

Svetli