Slawentiy
02-14-2002, 09:16
This only my thinks! (if somebody give me link i upload flash image from BF3 and you can see what i mean)
------------Thinks-------------------
If see on this phones we can see very more diferents but this not bad <img src="wink.gif" border="0">
Alcatel just make new generation of phones and use new technology. First new CPU, new Flash chip, new connector, and what we have now?
New Flash Chip - AMD(Am29DS163D) - alcatel now use lock sector engine (some troubles with writing, and patch flash image) but this can do with new loaders. Locked zone start at 1F0000 and end on 1FFFFF - in this zones we see 3DS parameters of this BF phone. <br />Also alcatel change programers <img src="wink.gif" border="0"> Flash image have now new linker - all zones now new adress (i mean <br />flash loader KJ133110 - now on 0x1FF0 patch for this FJ16AM03 - on 0x2000, Standart System parameters on 0x1C0000 PJ13CC12 BF31W-11TOGB1 101 RG150, and All WAP parameters and Engine now in Begin of flash image) - this be good and not hard.<br />And!!!! Lock Engine NOT CHANGE!!
Connectors - very strange if see first, but i think alcatel make this 3 system connectors for JTAG interfase, Modem, RX,TX, and ofcourse some system.
CPU - just new CPU <img src="wink.gif" border="0"> - troubles with booting.
------------Thinks-------------------
If see on this phones we can see very more diferents but this not bad <img src="wink.gif" border="0">
Alcatel just make new generation of phones and use new technology. First new CPU, new Flash chip, new connector, and what we have now?
New Flash Chip - AMD(Am29DS163D) - alcatel now use lock sector engine (some troubles with writing, and patch flash image) but this can do with new loaders. Locked zone start at 1F0000 and end on 1FFFFF - in this zones we see 3DS parameters of this BF phone. <br />Also alcatel change programers <img src="wink.gif" border="0"> Flash image have now new linker - all zones now new adress (i mean <br />flash loader KJ133110 - now on 0x1FF0 patch for this FJ16AM03 - on 0x2000, Standart System parameters on 0x1C0000 PJ13CC12 BF31W-11TOGB1 101 RG150, and All WAP parameters and Engine now in Begin of flash image) - this be good and not hard.<br />And!!!! Lock Engine NOT CHANGE!!
Connectors - very strange if see first, but i think alcatel make this 3 system connectors for JTAG interfase, Modem, RX,TX, and ofcourse some system.
CPU - just new CPU <img src="wink.gif" border="0"> - troubles with booting.