9110 in shell displays "Internal error. Remove battery to reboot"

[mashco]

What shopud I do? Antenna cable got broken, and I changed it, phone was working just fine, but there was no illumination on shell display so I opened it again and tried to fix it but i made a big S**T, and now the phone logs on the net but I have certain problems in phone part and the shell part displays 9110 logo and Internal error Remove battery to reboot, every time I try to turn it on... tried to reset the unit but nothing happens. Anyone help....or maybe it is an hardware problem??? Thanks in advance, regards,

MASHCO

[JammerOne]

Try to reset amigo...<br />remove the internal battery..

JammerOne

[mashco]

Tried several times internal,external, both, but same ol story "Internal error, remove battery to reboot" in shell window... please further suggestions...

<br />MASHCO <br /> <img src="mad.gif" border="0">

[DCAvdP]

Hi there,

Since you opened the device make sure the flex is<br />properly connected.<br />If that's ok then try to delete temp files.<br />(press and hold CTrl+SHIFT+Left ARROW) and insert<br />battery.<br />If that doesn't cure the problem format your device (it's useless at this point anyhow so sorry 'bout your data).<br />Then it should work

good luck

[mashco]

If anyone experience this problem, just change internal battery, and once you put one with proper voltage there won't be any problem. Greetz 2 all,

mashco <img src="biggrin.gif" border="0">

[AgA]

Hi all!!

Maestro´s Solution is the most suitable in most of the cases, solely coarse with reset the outburst files and to erase the temp files. <br /> <br />Alone in the case of a state of very lingering rest or an accidental short circuit will be necessary the change of the internal battery.

B.R.

AgA