7250i contact service after flashing

[Natali]

I flashing 7250i, but after flash his write "contact service". I do write PMM and Unlock, but nothing. What can I do now???? Help me, please!

Thanks!

[taihv]

I think u need reflash with MCU+PPM and unlock it!
BWR

[thecult]

sure is a 7250i???? could be 7250 - 7250i or 7210 in a 7250i housing

[essojay]

you most likely flashed the wrong flash into phone if you had flashed in a 7250 file, try to reflash with a 7250i flash.

bR

[lyy]

yesterday i happen same as.test it is sw fail for griffin !can solve it use prodigy eeprom function?

[mohd_anan]

Bad News
No body can solve it for the time being it happend with me. The only solution is to convert it to 7250 normal one and may be u have to change ur lcd too.

Sorry I was wondering to give u this bad news but atleast u know what to do. !!

Or.

change the uem pay $$$ for a new rpl after reading an ask file using griffin I hope u can find some body here ready to eate ur money

Good luck and contact me if u need more help

[nonu_don]

someone told me first put up 7250i pm into phone then flash it with 7250i mcu ppm

(not tested by me)

[yousha]

someone told me first put up 7250i pm into phone then flash it with 7250i mcu ppm

(not tested by me)

Not work already tested u need RPL to bring back 7250i

[nonu_don]

@yousha
i very knew this that if we flash 7250i to someother model we nned rpl

but some posts in this thread changed my view: http://forum.gsmhosting.com/vbb/showthread.php?t=142208

[bubbles]

I flashing 7250i, but after flash his write "contact service". I do write PMM and Unlock, but nothing. What can I do now???? Help me, please!

Thanks!

Sir,

Maybe thier is something wrong of your program try to softwae
in other box maybe works.............

[yousha]

my friend we can convert 7250i into 6610i without RPL but not 7250i into 7250i after wrong flash !!!!

[dannyogolo]

Hello,
U have 2 options.

1. Flash down to 7250 (no " i ") and change LCD = 100% done by me about 7 times with Twister
2. Flash and repair as 7250i with Prodigy. = 100 % done by me on about 5 times.

Case closed.

[zakirn]

we should not write pm on 7250i.

downgrade to 7250 and change lcd = work 100%
or flash 7250i flash and request rpl from griffin team and write. your problem will be solved. no other choice.

[Drug_Store]

someone told me first put up 7250i pm into phone then flash it with 7250i mcu ppm

(not tested by me)

Yes, always upload PM first, then flash.
Do not know if is the solution for this case, but the steps are correct

[apadana]

I use of TORNADO box .I flash a 7250i and it with some flash files shows "contact sevice" and with some other flash files blue screen.but when it connected to box & i choose "normal mode" shows "INSERT SIM CARD" and it makes me confuse.

[Monkey_Zu]

WHY DOES THE LCD SOMETIMES NOT WORK AFTER 7250i -> 7250 ???

but sometimes it works fine? is there an order/procedure so it does not become damaged, or maybe take it off while flashing?? can the blank lcd's be used/restored??

thanks,MZ