PDA

View Full Version : NEC e313 problem after enter code!!! no more 3g card back by codes


crossings
06-05-2004, 12:26
I temporary unlocked nec e313 with 2g card but client want to work back also 3g card . so i tryed codes again with 3g card but phone says ''blocked'' , no more card accept now ,only the one wich i tryed first time codes. How can i reset it or some way to work with 3g card or other back???

thanks alot

crossings
06-07-2004, 14:05
no one can help me pleasee

QTEL
06-07-2004, 14:24
Yes no one can help you until any new nec software arrive.
and pls dont try to temporary unlock any NEC phones. after unlock it will work but avery 15 or 20 seconds it will automatically switch off and restart.

Contact julvir via icq. somtime he will help you. Julvir icq 97680885


Regards.

byteforce
06-08-2004, 12:30
Yes no one can help you until any new nec software arrive.
and pls dont try to temporary unlock any NEC phones. after unlock it will work but avery 15 or 20 seconds it will automatically switch off and restart.

Contact julvir via icq. somtime he will help you. Julvir icq 97680885


Regards.


I think that this is not true.

soft@man
06-09-2004, 02:06
hi
freee software nec calculateur
c313 e616 e313 c616 e606 e808
i tess 100%%%
www.benbad.com

electrohicham
06-18-2004, 22:46
hi
freee software nec calculateur
c313 e616 e313 c616 e606 e808
i tess 100%%%
www.benbad.com
yes it work for temporarli unlock tested in 3 e313 and unlocked to itisalat al magrib but need inter code again i you change the provider :D :D :D

markab
07-11-2004, 22:47
I temporary unlocked nec e313 with 2g card but client want to work back also 3g card . so i tryed codes again with 3g card but phone says ''blocked'' , no more card accept now ,only the one wich i tryed first time codes. How can i reset it or some way to work with 3g card or other back???

thanks alot

Hi did you sort this out as I have same problem. If you managed to fix it back to 3 can you advise me how?

Many thanks

slinkygnu
07-11-2004, 23:09
You can't fix it back to a 3g after its been switched to a 2g. Hopefully this'll change in the future, but at present its not possible.

markab
07-11-2004, 23:21
so my 3g sim is now useless? and as the phone dosent work fully on the 2g simm I have ruined a new phone - I wish this had been made more obvious by all those people posting the temporary simm unlock codes.

A warning to all

slinkygnu
07-11-2004, 23:24
mind you if :-

* 73738 # (send)

resets the phone back to factory defaults, would that set if back to a 3g model?
anyone want to try?

markab
07-11-2004, 23:43
just tried * 73738 # (send) and no luck - had to enter emergency mode to reset phone all looked like it worked ok and was asked to enter handset lock code - switched phone offf and back on and still have the 'please insert correct USIM card' message

:(

slinkygnu
07-11-2004, 23:52
thats that idea out then.
you could open it, break something internal, and take it back to argos and get a replacement.
what uk 2g network were you using? what wasn't working, what s/w version are you using.

this discussion will get nowhere until everyone finds out what versions can be sim unlocked - instead of 100 different people posting "how can I unlock". We'll at least know what sims and software versions work, and which don;t. Instead of people ruining good phones for no gain.

markab
07-12-2004, 00:01
OK - not that this means anything to me software is :

SW ACPU:E21.43.04
CCPU:C623 R06

unlocked to an O2 card - worked but no contacts or SMS
also tried to unlock to my work SIM card which is also O2 but is also on a private network e.g I can call internal numbers on in rather than external STD numbers . This did not work at all

When putting 3g card back in get 'please insert correct USIM card' message.

Hope this helps others

markab
07-12-2004, 00:10
Just thought - I forgot to mention that I never put the 3g card into the phone prior to trying to unloct to another network - maybe this was my error?

slinkygnu
07-12-2004, 01:35
My software is :

SW ACPU:E21.43.04
CCPU:C623 R06

unlocked to a Vodaphone card - worked.

This seems strange, but I do not beleive that you can write contacts to the sim card. writing contacts into the phone works.
SMS works.

also tried to unlock to my work SIM card which is also O2 but is also on a private network e.g I can call internal numbers on in rather than external STD numbers . This did not work at all (don;t know anything about this).

When putting 3g card back in get 'please insert correct USIM card' message. (it will do cos its locked to 2g now.


"Just thought - I forgot to mention that I never put the 3g card into the phone prior to trying to unloct to another network - maybe this was my error?" nothing to do with it. I sold the 3 sim seperate, still sealed.

I think this is SIM related. Vodaphone is good. O2 bad.

Need feedback on this.

My current theory is that Vodaphone sims work with this method (ie you can sms, but contacts on the sim DON'T - contacts on the phone DO work).

markab
07-12-2004, 12:24
contacts now working on my own o2 SiMM this is an O2 2.5 generation card- can send SMS - cant send mms - cant send video or picture content.

Still wont work on my work O2 card which is a real p**sser as I only ever use this SiMM.