View Full Version : Nec 341i Unlock By Redbox
Medusa Lancer
06-26-2004, 01:23
HELLO FOR ALL UNLOCKERS
THE BEST NEWS THIS NIGHT FOR NEC
:eek: :eek: :eek:
NEC 341I IS SUPPORTED AND NEW UPDATE IN REDBOX :D :D :D
GOOD WORK JULVIR AND HIS PROGRAMMER :eek: :eek:
BEST REGARDS :D
I update the redbos and all is OK
I made a cable follow your pin-out I cheked all the conections,
and everything is OK...when I start the program Press the power
the phone the cursor of the program stops for one second but
nothing happend and red led from the
phone turn on...and the program says ERROR.
what is the difference between N341i normal end N341iNEW
and how can I see that...
Best regardes
Mihnea
@Mihnea
for N341i and N525i you must power on Phone first then plug cable and open soft for can see new COM port.. then Chose your EMULATED port and chose N341i than Read :)
-the diferebce betwen N341i and New341i the last one is from USA market AT&T provider :)
if you need any help just post in redboxe section ;)
wearephones
06-28-2004, 04:53
Can you send me the pinouts pelase
Can you send me the pinouts pelase
Get original NEC usb cable and instal the driver for it.. and in system devices, make sure the usb is emulated as com port, and then check for any starnge com port on your Com port choice on NEC redbox software.. and make sure phone is on. and then you can unlock..
bR
from where driver for usb for nec341i?..i don't have original cable...
10x
You can get it in Red box support area
There is little confusion.....so do it like this ....swtich on phone....plug in usb cable....install drivers...run nec exe ....and there you must choose the com port from the new two ports...which is minor....lets say you have 6 and 7 so choose 6.And all is ok.
Well the phone i have unlocked with Redbox now have different problems.....like it doesnt goes on some times ...it freezes...it restarts....it saye PLease wait....and many more.