PDA

View Full Version : A800 displays only square line after power on!!


GSM SNIPER
07-01-2004, 21:42
When I switch on It (A800) .It displays on

A800 posts only square dial along the circumference of the dispalayer .

And no thing after that !!

What can be the solution please ???

bestman
07-01-2004, 21:48
troublshooting your phone.
check your phone flux, if in proper laying position.


bestman.

GSM SNIPER
07-01-2004, 21:53
troublshooting your phone.
check your phone flux, if in proper laying position.


bestman.


so the problem is hardware level not software ?

Ayush
07-02-2004, 03:01
Hi
PLease explain the problem perfectly....
Is it like the light blink? And then they freeze?
NO matter what it is but i recommend you flashing the phone coz it may be a hardware but the bliking problem is a 100% software. Whats urs u choose....
regards
Ayush

Syed
07-02-2004, 09:39
Flash it it will work perfect !!

WBR
Syed

GSM SNIPER
07-02-2004, 12:59
Flash it it will work perfect !!

WBR
Syed


thank you very much Syed and ayush .
My phone is revived with full flahs !

Victel UA
07-02-2004, 15:29
If after flash only frame displayed - It is necessary to be short circuit of memory battery on 3-5 sec - it's will be OK! It's good working if phone is new.

GSM SNIPER
07-02-2004, 19:14
If after flash only frame displayed - It is necessary to be short circuit of memory battery on 3-5 sec - it's will be OK! It's good working if phone is new.


Explaine more please ! I didn't understand how to short crcuit memory battery )!!

Victel UA
07-03-2004, 12:22
Explaine more please ! I didn't understand how to short crcuit memory battery )!!
Inside near a system socket there is a battery of memory. It is necessary to make short circuit of her contacts.
Sorry my english. I'm not englishman :)

Unggul
07-09-2004, 22:06
it can be from flex cable line broken or damage, change the flex cable with the new one.

regards
unggul

bestman
07-14-2004, 23:01
try cleaning your phone flux , with dry brush .


bestman.

webmoly
07-17-2004, 13:34
hi

no need to flash, just do as i say, open ur cell phone, u see backup battery there , right ? just short ( connect ) + pin and - pin for a secand.

put the battery and power on ur phone, u see ur phone is working great.
I promise u it work 100% .

have fun
mOLY

ps, write us the result plz to be sure about the way i told u

.::Moby World::.
07-17-2004, 23:34
clean bord with good ... and if not remove r300 u im sur u know this solution om
wbr