View Full Version : Panasonic GD67 dead!
.:: SkyElectronic ::.
07-04-2004, 22:34
I had try to flash it with some software but phone now not show Flash mode on screen!
Any help??
ps I had try and with WinMOdo same probem phone not show FlashMode
50-pounds
07-06-2004, 10:38
sounds like your phone is a paper weight now :confused: you will need to replace the flash id chip dont ask me how 2 do it lol i dont have a clue scary **** tho sorry mate
50!
Slider_Gsm
09-01-2004, 00:12
where to get that flash ic for taht gd67 i have one i think the boot is gone
wengming
09-01-2004, 07:28
you can use up-48
write back the flasher boot
Boot area damaged=cannot be booted.Original JIGbox can boot the phone with manual ignition I guess.
BR
50-pounds
09-01-2004, 12:09
i think's your right matey! :)
u can make ur phone
contact me 4 solution
50-pounds
03-19-2005, 21:04
will it cost to get fixed like? i have a dead gd67 :(
asteraky
03-20-2005, 09:51
I had try to flash it with some software but phone now not show Flash mode on screen!
Any help??
ps I had try and with WinMOdo same probem phone not show FlashMode
You have three solution here:1-jtag,2-external programmer(labtool),3-trick!!!
Because trick`s are free...you need this:
WINMONDO with gd67 support...working gd67 and 5v external power suplly.
how it works....solder the external 5v on phone(working one)then select language(only)on winmondo and start!!!when you see writing message press stop.Now the phone is in flash mode...
You must to repleace working flash ic with bad one...in this time not brake down the power suplly from phone.After that select boot,main and language and press again start...this solution work 100% for gd67/87 :) and was posted here for few times....why you not search a little :confused:
P.S.phone must bee opened during this to get access to flash ic...