E700 Simcard holder [Archive]

Gennady

07-05-2004, 14:54

I have hier an Samsung E700. Simholder was ripped of the PCB, so there is no way to solder it back as the PCB connectors are gone. I'm looking for the shortcut of the ferst leg ( pls. see the picture ) all the rest was easy to trace. But i cant found out where the ferst leg is linket to.
Thenks to all who can help.

Regards
Gennady

bestman

07-14-2004, 23:12

use rework station to plant your sim holder ,back into place.

bestman.

Bigbrothers2000

10-27-2004, 22:40

I have hier an Samsung E700. Simholder was ripped of the PCB, so there is no way to solder it back as the PCB connectors are gone. I'm looking for the shortcut of the ferst leg ( pls. see the picture ) all the rest was easy to trace. But i cant found out where the ferst leg is linket to.
Thenks to all who can help.

Regards
Gennady

i have the same problem
who can help with this pin

b/r

GSM4U

11-13-2004, 02:50

Guys I repaired 2 samsung with this problem!
It's hard but this was the only way I could repair those phones.
I took a razor blade and I scrached the mother board(under the missing leg of sim holder) till I saw a little part of the circuit.I soldered a wire betwen and it's working.Try not to scrach to hard ,be gentle so u don't destroy it!!!
Hope it will work for u guys!!! :)