nec 313 unlcok

[Nicko_12345]

is it posible to do by codes?

[browntoa]

NEC Temporary Unlock:

1) Put a 2G Simcard (the sim card you want to use) into the phone and turn ON the phone.

2) Enter the following code into the phone (xxxxxxxx = any numbers, If the phone does not ask for a code after entering the #4960* part then this method will not work for you)

#4960*xxxxxxxx#
*4960*xxxxxxxx*xxxxxxxx#

3) Turn the phone OFF and ON again.


Remember the xxxxxxxx you used. You will need to use same code in the future.

Attention:


- This unlock method ONLY works with one Simcard. If you wish to change to another Simcard or back to the 3g simcard, you will have to unlock again using this same code !

- This method only works on some firmware versions. If it didn't work then only a cable unlock solution can help you.
- The code only works on phones manufactured up to March this year
- You only have 3 attempts to enter the code before the phone locks out and can only be unlocked by direct cable and software.
- If the phone does not ask for a code after entering the #4960* part then this method will not work for you.

[Nicko_12345]

so if i wanted to sell this phone to someone i would need there sim in the phone to make it work with there sim????

[browntoa]

not really, just give them the instructions

try it with your own sim to make sure it works

[Nicko_12345]

ok cheers,

is the solution to completly unlock the phone out?

[slinkygnu]

answered myself.
works a treat with a vodaphone sim, and UK e313.

[bungle_uk]

This is a temporary unlock solution. It simply relocks the phone to a new sim card.
eg. Phone was originally on 3 (only works with 3 cards), you unlock to work Orange (now only works with Orange sim card, no others)

[carlos2003]

what cable and software do you need to unlock it?

[slinkygnu]

You can only unlock the sim. No cable or software are needed.

As stated above:-

NEC Temporary Unlock:

1) Put a 2G Simcard (the sim card you want to use) into the phone and turn ON the phone.

2) Enter the following code into the phone (xxxxxxxx = any numbers, If the phone does not ask for a code after entering the #4960* part then this method will not work for you)

#4960*xxxxxxxx#
*4960*xxxxxxxx*xxxxxxxx#

3) Turn the phone OFF and ON again.


Remember the xxxxxxxx you used. You will need to use same code in the future.

Attention:


- This unlock method ONLY works with one Simcard. If you wish to change to another Simcard or back to the 3g simcard, you will have to unlock again using this same code !

- This method only works on some firmware versions. If it didn't work then only a cable unlock solution can help you.
- The code only works on phones manufactured up to March this year
- You only have 3 attempts to enter the code before the phone locks out and can only be unlocked by direct cable and software.
- If the phone does not ask for a code after entering the #4960* part then this method will not work for you

[rajaguru]

Hi,

I wanted to try this, but when I switch on the mobile says incorrect USIM card. And I click emergency and there after 2 seconds it requests for a unlock code. But when I press # it is not visible there.

I didn't know how to proceed. I stopped.

Pls inform me whether the method I followed is correct? But # not visible

Pls help me to unlock the sim.

Thanks in Advance

[markab]

warning to all - i unlocked my phone to a 2.5g Sim but now can not use the 3G SIM - Camera will not finction on 2G nor will MMS or WAP - A big word of warning the 4960 code only works to some extent and it looks like you are stuck with a part functioning phone afterwards.

BTW - if anyone knows how I can unlock the SIM back to my 3g card please advise - repeating the 4960 function does not work

[DMD]

Hi All

Have one E313 thats locked and have tried temp unlock but no joy??
any other solutions??

WBR D.

[sunnyc]

this is best slou e 313 very good

[sunnyc]

HI all NEC E313 & E616 best code CALcuter and more vsit pls my groups
http://groups.yahoo.com/group/Mobilewala01/files

[slinkygnu]

Could you post proof that this 'calculator' works, and show what benefits it has over just entering any 8 random numbers into the NEC.
All this does is produce an 8 digit number sequence based on a formula that is unconnected to any unlocking criteria.

[bladesfan]

i have 2 e313's both purchased in the last week

firmware acpu e01 009 00
ccpu c620 r37 n

acpu e21 63 11b
ccpu c620 r1y 0

both will not unlock with the #4690* method

any idea's

[slinkygnu]

try here http://forum.gsmhosting.com/vbb/showthread.php?t=150629

[Mervy2k4]

alrite i just did the whole 4960 thingy, turned phone off, turned it on, asked for usim code which i typed in, it accepted, and now the phone is on. problem is, i cant do NETHING!!! cant use camera, cant dial, cant go to menu, nething!! some1 help??

[ivalavamp]

That is just temporary unlock, and will only allow you to make calls. Try the emergency call unlocking method or the necfree.
:)

[ppp]

alrite i just did the whole 4960 thingy, turned phone off, turned it on, asked for usim code which i typed in, it accepted, and now the phone is on. problem is, i cant do NETHING!!! cant use camera, cant dial, cant go to menu, nething!! some1 help??

the nec free will do it

[jazzy9002]

hi there , can anyone i mean anyone help me out of this .....n900ig problem,
my handset is not locked,i can send recieve calls , sms ,view phonebook.
but i cannot use gprs/mms because my set is not configured for that , using djuice of telenor pakistan , they say i need to manually configure the settings but they and i dont have know from where and how to enter in APN menu, is there any code ?
without gprs/mms this phone is worthless for me , but i like this handset so much i dont want to dump it .please help me if anyone can ... how can i access n900ig apn menu1 or 2 , there is no mention of it in its original menu, it just have option of host selection ,which asks for only host name ,and host selection, there is no word about ip , username , password, bearer, and etc,
can anyone help ?