Tele 2 and Fun

[zosa]

Hi All
Help me ((((
I have Fun Card, but I don't search Sim_Emu for thies card
I have card Tele 2, How I clone thies card?
Thank you,

[SuPeR_PoPeY]

tele 2 card i don´t know if it is a comp128 v2 card, but i think that to clone is like a normal card so put it in you programar and read ki and imsi
funcard to emulate sim card it´s not simemu, but funsim, you can download it forim ftp of endorasoft, but it haven´t menu and do not work on many phones

[zosa]

Thak's for answer!
Unfortunately I have only Fun card (((
If the insertion will appear, inform please.
All many thanks.

[SirGraham]

Hi,

Super Popey ask you. You can´t use SIMEMU in the FunCard. For this card you must use other emulator: FunSIM. You can download this emulator in the FTP of EndoraSoft, But this emulator don´t work in all terminals (phones).

Regards,
Sir Graham.

[SuPeR_PoPeY]

thanks SirGraham ;)

[sbog]

Tele2 SIMs here in Russia - are rather sofisticated: they have TWO valid PIN1 codes: if you enter normal PIN (say ABCD) you get normal behaviour in home network with IMSI that belongs to 250 20 (Russian Tele2) and no chance to roaming anywhere. But if you enter 1ABCD - (1+normal PIN1-code) - your card becomes swedish one! IMSI contains an info of some SIM of the 240 07 network. Ki - is unique for both - at least such cards result in the same Kc/SRES with the same RAND (i tryed about 10 RANDs - thats enough i believe). This second IMSI is used for rather cheap (affordable) call-back USSD roaming. You simply dial *147#some_number# and in 10-15 seconds receive an incoming call with the person some_number at the other end.

As for Ki extraction - it's impossible by means of collision methods - our Tele2 cards are NOT COMP128v1. It could be easily shown: last 10 bits in GSM-Algo reply are not zeros as they should be in COMP128v1 with any RAND.