SVH
07-29-2004, 02:53
UEM 4370825 was faulty so i changed it on new 4370805
but problem is i cant write RPL or generate ASK file
I have Griffin Gold Box original (updated to v2.51),
cable 100% working,
flashing&unlock no pb.
I made modification (180 Ohm resistor) and when i push TestVBAT i get 5.1v
but
1)when i want to write RPL
-select ASIC2
-push WriteData and select file from RPL folder from Prog files/nokia/phoenix/RPL Files - now phone powers off, Griffin freezes on some time and after:
Set IMEI to UEM failed. Terminating procedure
2)when want make ASK file
-select Calculate IMEI Flash Area
-push ReadData - again Griffin freezes on some time and after:
Operation failed
i tried many combinations - no result
it makes me crazy
need really good advice
but problem is i cant write RPL or generate ASK file
I have Griffin Gold Box original (updated to v2.51),
cable 100% working,
flashing&unlock no pb.
I made modification (180 Ohm resistor) and when i push TestVBAT i get 5.1v
but
1)when i want to write RPL
-select ASIC2
-push WriteData and select file from RPL folder from Prog files/nokia/phoenix/RPL Files - now phone powers off, Griffin freezes on some time and after:
Set IMEI to UEM failed. Terminating procedure
2)when want make ASK file
-select Calculate IMEI Flash Area
-push ReadData - again Griffin freezes on some time and after:
Operation failed
i tried many combinations - no result
it makes me crazy
need really good advice