PDA

View Full Version : Boot file is not accepted


Rahuman28
08-11-2004, 10:22
A 55 v11 couldn't UNLOCK using Siemens CLIP, Freia and as well as All Siemens.

When fixed to Clip the phone enter into Service Mode but do not get unlocked.

When connected via Freia and All Siemens "boot file is not accepted" tried all config. So what could be the problem.

WBR

tanucu04
08-11-2004, 10:34
Try tu cut test point.

Rahuman28
08-11-2004, 10:36
Siemens phones unlocked by cutting Test Point are seems to be malfunctioning at later stage.

WBR

steva
08-11-2004, 10:56
if use freia software you must use test piont.that is only way to unlock
regards