View Full Version : flashing sl55 probs?
Hi peps
when flashing firmware to an sl55 it reproted an error around 75% os action?
using Freia 15 (AllSiemens.com), now when i try to reflash again it wont allow phone to power on and i get the folloing message:
COMM_LoadBoots : selected phone family is 9
TTY_OpenCOMPort : opening Prodigy
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is not powered on
any ideas peps?
tanucu04
08-12-2004, 13:43
change at freia boot type : bootcore bug, an try to use a good battery.
if tanucu04 solution doesn't work, check small driver (microbga ic) on bottom connector, sometimes is broken or damaged
b.r.
change at freia boot type : bootcore bug, an try to use a good battery.
tried all boot types and get the same problem?
battery is fully charged and in good working order?
tanucu04
08-12-2004, 14:12
Make test point and then try again.
I think too that your problem is an emty batterie!
Make test point and then try again.
bit of a novice m8, how do i do it?
tanucu04
08-12-2004, 16:01
give me your email adress, and I will send siemens test point ok?
give me your email adress, and I will send siemens test point ok?
cheers m8 :D
gmxitalianstallion@tiscali.co.uk
I think too that your problem is an emty batterie!
as stated earlier, battery is fully charged and working!
even checked on another fone?
cheers m8 :D
gmxitalianstallion@tiscali.co.uk
can any help me out with siemens tesy point?
not heard from tanucu04 yet:(
ednacell
08-14-2004, 14:02
test point at http://gsmfree.vipserver.ru/Siemens/Siemens_Testpoint.htm
test point at http://gsmfree.vipserver.ru/Siemens/Siemens_Testpoint.htm
thanks m8, but can any1 translate for me?
and wot does test point do?
ednacell
08-15-2004, 02:00
From my short experience using SIEMENS Test point (TP) and freia software. I have encountered two
Types of SIEMENS Test points (TPs):
1. Ground the test point
2. Cut the circuit to Test point.
In any case using the test point gets you the opportunity to unlock the mobile phone and/or flash the mobile phone. Therefore YOU need to know the mobile phone you are working with, then locate the test point and then go for it. We can get to the solution quicker if one gets to the point, ask relative questions for the relative problems at hand. Reading is fundamental but, doing is experience and having the know how... :rolleyes:
Test points http://gsmfree.vipserver.ru/Siemens...s_Testpoint.htm :eek: