View Full Version : M55 dead.. which files, which version?
equinoks
08-12-2004, 23:07
I just had an M55 V11 dead by trying the JAVA patch, now how can i flash it? with which files? and with or without tespoint?
thx !
equinoks
08-12-2004, 23:28
I tried to flash it with V11 fullfalsh using Freia and "M55 BOOT" with 14Mb flash file, now freia doesn't detect the phone :( any solution ?
Cut testpoint and write BOOTCORE FILE ONLY!!!!!!
tanucu04
08-13-2004, 01:11
Cut test point and then write boot file (2Mb) "M55 BOOT".
If not power on write a good eeprom and unlock it.
Cut test point and then write boot file (2Mb) "M55 BOOT".
If not power on write a good eeprom and unlock it.
No, he killed only bootcore so he have to write bootcore only!
All other will f*ck the phone only more!
tanucu04
08-13-2004, 14:01
Chris02
I also have one m55 with bad bootcore and I write bootcore but nothing (the phone is dead) and when I wrote a good eeprom and unlock the phone power on.
equinoks
08-13-2004, 16:15
thank you! i searched for BOOTCORE FILE.. i didn't find it? can you post a link plz ?
send me your mail adress via PM and I'll send it to you!
equinoks
08-13-2004, 20:44
email address sent via PM :) thx
tanucu04
08-13-2004, 20:52
Here is the link where you find siemens m55 full flash, bootcore and eeprom.
http://www.unlockeasy.com/modules.php?name=Downloads&d_op=viewdownload&cid=50
equinoks
08-13-2004, 20:59
thank you mate !! :-)
equinoks
08-13-2004, 22:06
I've Cut testpoint and written BOOTCORE File, but it didn't power on.. I have written eeprom1 too and unlock but it doesn't power on too ?
here what i had with freia when i tried to unlock it :
COMM_IsBootRunning : bootcode does not seem to be running
COMM_LoadBoots : Waiting to power on the phone ...
COMM_LoadBoots : phone is powered on
COMM_LoadBoots : internal loader version is 01.02
COMM_LoadBoots : EEPROM IMEI is 35237700146046
COMM_LoadBoots : original IMEI is 35237700146046 (locked)
COMM_LoadBoots : found SIEMENS M55 lg92 v11 (1)
COMM_LoadBoots : flash ids are 00012212 [00000000] - 1201
COMM_LoadBoots : phone ids are 5D53672B [5D53672B]
O.K.
what's wrong ? :(
Try this one
http://mitglied.lycos.de/ippinghausen/M55_V11_by_Chris02.rar
Write 2MB Boot and then the FUBU
equinoks
08-14-2004, 15:08
I have written 2MB Boot with "M55 Boot" and "Bootcore" selected on preset, after i've written 14MB flash file with "M55" and "Firmware" selected on preset.. but phone still dead :( is it something special on configuration? i've made all with "Bootcore bug" selected..
[Andrei]
08-15-2004, 16:18
Hello all ! Ohh ... can help me somebody pls ... here is my problem : i try to put v91 ... (i have v10) .. I put it ... but ... at the last check my phone dont rispond and dont start anymore ... ! Then i put v10 backup and works fine ... but i try other way ... i remove the 3.75 mb for A ... patch from my v10 .... and then try to put the v91 ... but the same problem .... dont start .... ! And then when i put again my flash back-up with v10 .... the back-up it was succeffully installed .... but ... my phone dont start anymore ... ! Is complet dead .... V_Klay see the phone ... but .... i cant make anything .... because is has no effect ... ! what is the problemm ... what do i have to do ? Must go on a service ? 10x anticipating .....
ps: 10xcuse my english ... ...pls help ....
equinoks
08-16-2004, 17:30
I have written 2MB Boot with "M55 Boot" and "Bootcore" selected on preset, after i've written 14MB flash file with "M55" and "Firmware" selected on preset.. but phone still dead :( is it something special on configuration? i've made all with "Bootcore bug" selected..
any solution.. by the way i retry the operation : 2MB bootcore, 14MB Full flash and Eeprom writing, then unlocking but nothing :( do i have to give up the fight ?