View Full Version : c62, how to downgrade SW version?
filipboy
08-19-2004, 06:35
I've tried to downgrade sw version in my C62v26 to v13, and i've got error saying that flashing to older version is not allowed. My phone is now dead, how can i downgrade it???
zts16245
08-19-2004, 09:51
HI!
Do you know where i can get a new software version for my c62! I have the version 13! I need a higher version!
Thanx!
filipboy
08-19-2004, 18:35
you can get new SW version at http://ad.adriver.ru/cgi-bin/erle.cgi?sid=19719&target=blank&bt=1&pz=0&rnd=807120228
or at www.siemens-club.ru
filipboy
08-19-2004, 18:40
I've made my phone to start, I have and pic and sound, but I have no language in it, and I can't flash anything into it, because Flash programmer does not detect that I've restarted my phone. Info about phone can be read by Flasher when the phone it on.
Anyone have any solution?
hi
every one not possbile to downgreat Siemens C62
zts16245
08-19-2004, 23:32
hi filipboy!
tahnx for the software, i have found it!
But can you say me how to install it on my c62???
Thanx
filipboy
08-20-2004, 05:37
you have to download Flash Programmer for Siemens from www.siemens-club.ru and to use special cable with stabile 12V...
search the forum, here you can find everything you need
zts16245
08-20-2004, 10:48
Hi!
I have already the Flash Program, but when i push the button FLASH in the Program at first comes the message: Initalizing.....
Please restart phone.
Then i restart the phone but nothing happens!!!
filipboy
08-20-2004, 23:38
check your port, and your cable must have stable 12V.
If you have everyting I said, then you have the same problem, just like I.
pls any1 translate this web to English, or place direct link to C62 firmware i can't understand Russian lang.
filipboy
08-22-2004, 01:40
http://download.siemens-club.ru/files/flash/c62/?62_v26.rar
mobile star
08-24-2004, 14:25
link not work any other link pleas
http://download.siemens-club.ru/files/flash/c62/С62_v26.rar
It`s direct link. May not work. Try open next page and choose necessary link (links wrote in English):
http://www.siemens-club.ru/phcat.php?action=showmodelflash&IDmodel=24
gaucho78
09-01-2004, 16:00
i tried to downgrade from v.26 to v.20 renaming all files in v.20 folder from 083 to 092 and i flahed with flash programmer. it work becouse flash programmer says "successfull" but my phone is still dead so i don't know if this method work with working phone. help me!
i tried to downgrade from v.26 to v.20 renaming all files in v.20 folder from 083 to 092 and i flahed with flash programmer. it work becouse flash programmer says "successfull" but my phone is still dead so i don't know if this method work with working phone. help me!
After downgrade v20 with REPAIR GDFS need doing upgrade back to v26 , downgraded phones not power on.
gaucho78
09-02-2004, 11:27
i downgrade from v.26 to v.20 then i flashed with repair for v.20 and then upgrade to v.26 again but my phone is still dead.
p.s.:the first time i flashed my phone it was a lower version(lower than v.20). It's dead from when i done "flash recovery".
suggestion or solutions? could i send mail to microcell? has anyone done thing like this?
filipboy
09-03-2004, 01:12
I've done it. My phone was dead when I was doing flash with renamed files, but when I've flashed with v26 files without renaming, my phone started working.
gaucho78
09-06-2004, 10:51
yes but, how did your phone dead? mine is dead doing "recovery flash".. and your?
because if the causes of "dead" are different i think different problems may occour.. no?