Happy or Disappointed users of Dejan boxes ?

[Mondeo_man]

Let's try to see some of the problems of user and owners of Dejan boxes, buyed with lot of $$$$.

<img src="mad.gif" border="0"> Problem: Some time after flashing box is not calculating properly FLAID (because bad comunication with phone) result phone is not log to net.<br />DJ Solution: Start reflashing again... to much time lost, sometime no result.<br /> <img src="wink.gif" border="0"> User Solution: Modified sw to calculate FLAID only, without flashing, working very fast, very good for repairing phones with BAD FLAID.

<img src="mad.gif" border="0"> Problem: Can't upgrade change languages to new sw:<br />NHM-5 / 3310 V 5.03<br />NHM-6 / 3330 V 4.30, V 4.50<br />DJ Solution: Work on all DCT-3 phones BUT No Warranty and No Support.<br /> <img src="confused.gif" border="0"> User solution: ????

<img src="mad.gif" border="0"> Problem: After sw upgrade /language changed phone is not working properly.<br />DJ Solution: Use WT for reset phone.<br /> <img src="confused.gif" border="0"> User Solution: Where to buy an PKD-1 to use WT because cracked WT is not working properly for this. $$$$

<br />Conclusion: Because I have PKD-1 and some ASM programming/debugging knowledge I succed to solve some of this problems so I am ALMOST <img src="smile.gif" border="0">

What about you ?

[greenapple]

maybe u could help me.

i'm trying to do a program.

where can i find the cobba id, cobba chk etc? is it in flash? how can i get msid? where can i get the value or chksum needed to calc it? anyinfo would be appreciated very much...

thanks

[Mondeo_man]

Cobba id. chk is not stored in flash.<br />Commands for MSID you will find in DJ sources for sw 1.04<br />Checksum for flash is stored in flash also.<br />MCU checksum is stored at the begining of MCU and aslo at the end of PPM.<br />Checksum for PPM is stored at the end of PPM, last 6 bytes from PPM is the checksum, first 2 bytes is checksum for MCU last 4 are for PPM.

[mmax]

Let's say it so <br />We are wery unhappy !<br />1. Docu don't says explicit cost $$$ for log !<br />2. Service doing logs is very poor misspeld IMEI's<br /> ... and no log for corecting their faults.<br />3. His try to sell hex after apearing of<br /> new nokia models (wery poor !!!! )<br />4. Soft did not recognise diference between<br /> NSM-3 and NSM-3D , wanting to repair the<br /> missflashed phones with log ... <br /> Answer : no guarantee software works good !<br />5. About pricing 8000$ was o lot of $$$$<br /> we will not make the same mistake anymore.<br />6. We do not encurage buy of this box !

Bye !

[Me@n]

I am happy user of Dejan box 1.04 , yes I know of his faults and coming of new nokia phones with new protection but for me this box have done more than enough and it is still working well.

Now I am waithing for Dejans responce to new nokia phones.

[Mondeo_man]

Yes one of the BIG problem is LOG service wich nobody know if and how is working and who to contact for these log files...

By the way: Anybody interested to buy my box V 1.02. I think is time to try to recover part of this investment...

[mmax]

@Invisible Observer<br />I am intrested on your FAID changing soft <br />without flashing the phone new !<br />pls. mail me !<br />perhaps we can exchange something !<br />max@lunatel.de

[t68]

I do not understand why you do not buy the jic box its works every time perfect no hassle from a company not a geek in their bedroom,this equipment paid for itself in one week not one damaged phone.Or you can carry on buying weak solutions every month and end up paying more.

[Bph&co]

[quote]Originally posted by t68:<br /><strong> from a company not a geek in their bedroom </strong><hr></blockquote>

You need to see a doctor !