View Full Version : Unlock UserLock for PANTECH =)))
Anahrennik
08-26-2004, 03:05
On all Pantech Phones userlock code by default = ...
Unlock BY it!!
ARE [1][2][3][4] !!!!!!!!!!!!!!!!!!
Best Regards to Pantech programmist's joke =)))
Nice joke..........
SuPeR_PoPeY
08-26-2004, 03:18
???????????? another keany......
what do you mean with all that?
Anahrennik
08-26-2004, 03:21
Type 1234 when phone asked pw
Ahh, I see You know default code. It's good. Enough to see user manual for it or just type 0000,1234,12345. And what You will do when when code will be changed????
Can't see any sense of this thread...........
evilspell
08-26-2004, 10:31
very strange post????
Aamir_Zia
08-26-2004, 12:00
Very Useless Post
Its Better that Moderator will delete this Thread !!!
SuPeR_PoPeY
08-26-2004, 13:04
like i said, another keany.
want increase posts number.....
Anahrennik
08-26-2004, 17:41
With this code i unlocked 2 pieces Pantech G500.
When i asked for this code at this forum. Nobody help me =(
mauro.paolo
11-19-2005, 14:20
someone can help me? i must unlock a pantech pg1100...............but the normal code don't work with this model..........someone can help me?
Mobile Master Pk
11-19-2005, 16:54
very strange post man but y ?????
Aamir_Zia
11-19-2005, 16:58
for Unlock Pantech User Codes
use this Code
*01763*737381#
:::GsmFather:::
11-21-2005, 10:56
for Unlock Pantech User Codes
use this Code
*01763*737381#
this code is for panasonic.is this mean pantech is panasonic?
this code also good for audiovox and geo
samsagaz
03-30-2006, 19:04
well, after i reset the phone using *01763*737381# code, and i changed the SIM it ask me for passwords to UNLOCK it, i tryed with 00000000 12345678 and stuff like that but didnt work, it ask me for an 8 characters passwords i think, because if i type less characters nothing happend.
Someone know where can i get that code?
Thanks
bngfilms
07-18-2006, 22:24
Yeah, i got the same problem. I have the Cingular Pantech PG C300 and when i type in that code, it'll say "done". I reset the phone, then turn it back on but it's still asking to change SIM.
I've searched everywhere online and so far no one has been successfull at unlocking this phone.
ask and send phone to infinity they can develop unlock solution for you.
allal123
07-22-2006, 01:55
http://forum.gsmhosting.com/vbb/showpost.php?p=1886294&postcount=1
Yeah, i got the same problem. I have the Cingular Pantech PG C300 and when i type in that code, it'll say "done". I reset the phone, then turn it back on but it's still asking to change SIM.
I've searched everywhere online and so far no one has been successfull at unlocking this phone.
This code is good for removing user code only, to remove subsidy code you need an unlocking tool.
pinheadZ
07-22-2006, 08:50
Check www.tsmbox.com, now TSMbox+ supports Pantech phones.
Larry Kay
08-09-2006, 17:28
Well for now pantech cant be unlock by calculator, generator of other .i think they are just developing it.
Pantech - Some useful codes for you.
--------------------------------------------------------------------------------
Here some codes:Code of unlocking Pantech *01763*737381 *
At the end may be # or *
? ??? ???? ???
*01763*8371# SW version
*01763*6371# Unlock phone?
*01763*737381# unlock?
*01763*3641# ENGINR. MODE
BLANKET CODES - ????? ????:
---------------------------------------
G500 G600 G700 G800 G900
---------------------------------------
*01763*476# --- Tests
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*737381# (*01763*RESET1#) --- System reset (all default settings)
*01763*546360# --- LineN0 ?
*01763*546361# --- LineN1 ?
*01763*546364# --- LineN4 ?
*01763*546367# --- LineN7 ?
*01763*34531# --- ?
*01763*62766# --- ?
*01763*727# --- ?
*01763*68726# --- ?
-------------------------------------------------- -----------------------------
-------------------------------------------------- -----------------------------
ADDITIONAL CODES - ?????????????? ????:
---------------------------------------
G500 [GIHR0507042004 ZEUS Ver. 0.01s]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
*01763*225837# --- ?
---------------------------------------
G600 [GZBP0105102004 PANTECH ver 1.0]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
---------------------------------------
G700 [GXNP0107242004 TLION ver 1.0s]
---------------------------------------
none - ???
---------------------------------------
G800 [GLAP0006062004 G800 ver 1.0N]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
*01763*79837# (*01763*SWVER#) --- SoftWare version
*01763*28271# --- ?
antoniolcrd
08-14-2006, 19:29
for Unlock Pantech User Codes
use this Code
*01763*737381#
;)
hehehe. thanks man. I unlocked a PANTECH PG2100 from user code lock.
Just reset the device without the sim card using this and then typed the default code 1234. User happy and more $5,00 in my pocket.
:D
tq, success unlocked a g500
for Unlock Pantech User Codes
use this Code
*01763*737381#
Excellent.! This code I worked with a panteh GB310
GUARANTEED THAT WORKS FOR THE USER CODE GB310
:D
Pantech - Some useful codes for you.
--------------------------------------------------------------------------------
Here some codes:Code of unlocking Pantech *01763*737381 *
At the end may be # or *
? ??? ???? ???
*01763*8371# SW version
*01763*6371# Unlock phone?
*01763*737381# unlock?
*01763*3641# ENGINR. MODE
BLANKET CODES - ????? ????:
---------------------------------------
G500 G600 G700 G800 G900
---------------------------------------
*01763*476# --- Tests
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*737381# (*01763*RESET1#) --- System reset (all default settings)
*01763*546360# --- LineN0 ?
*01763*546361# --- LineN1 ?
*01763*546364# --- LineN4 ?
*01763*546367# --- LineN7 ?
*01763*34531# --- ?
*01763*62766# --- ?
*01763*727# --- ?
*01763*68726# --- ?
-------------------------------------------------- -----------------------------
-------------------------------------------------- -----------------------------
ADDITIONAL CODES - ?????????????? ????:
---------------------------------------
G500 [GIHR0507042004 ZEUS Ver. 0.01s]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
*01763*225837# --- ?
---------------------------------------
G600 [GZBP0105102004 PANTECH ver 1.0]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
---------------------------------------
G700 [GXNP0107242004 TLION ver 1.0s]
---------------------------------------
none - ???
---------------------------------------
G800 [GLAP0006062004 G800 ver 1.0N]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
*01763*79837# (*01763*SWVER#) --- SoftWare version
*01763*28271# --- ?
usefull code, thanks bro.
canliyayin
01-01-2008, 08:11
*01763*737381# - master reset (user data, user code) without SIM
*01763*8371# - SW version
*01763*6371# - UNLOCK
*01763*3641# - Menu
canliyayin
01-01-2008, 08:12
Originally Posted by khansb
Pantech - Some useful codes for you.
--------------------------------------------------------------------------------
Here some codes:Code of unlocking Pantech *01763*737381 *
At the end may be # or *
? ??? ???? ???
*01763*8371# SW version
*01763*6371# Unlock phone?
*01763*737381# unlock?
*01763*3641# ENGINR. MODE
BLANKET CODES - ????? ????:
---------------------------------------
G500 G600 G700 G800 G900
---------------------------------------
*01763*476# --- Tests
*01763*5640# (*01763*LOG0#) --- Disable LOG
*01763*5641# (*01763*LOG1#) --- Enable LOG
*01763*6370# (*01763*MEP0#) --- Disable MEP menu (unlock menu)
*01763*6371# (*01763*MEP1#) --- Enable MEP menu (unlock menu)
*01763*3640# (*01763*ENG0#) --- Disable Engineer Mode
*01763*3641# (*01763*ENG1#) --- Enable Engineer Mode
*01763*63866330# (*01763*NETMODE0#) --- Disable NetMode
*01763*63866331# (*01763*NETMODE1#) --- Enable NetMode
*01763*737381# (*01763*RESET1#) --- System reset (all default settings)
*01763*546360# --- LineN0 ?
*01763*546361# --- LineN1 ?
*01763*546364# --- LineN4 ?
*01763*546367# --- LineN7 ?
*01763*34531# --- ?
*01763*62766# --- ?
*01763*727# --- ?
*01763*68726# --- ?
-------------------------------------------------- -----------------------------
-------------------------------------------------- -----------------------------
ADDITIONAL CODES - ?????????????? ????:
---------------------------------------
G500 [GIHR0507042004 ZEUS Ver. 0.01s]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
*01763*225837# --- ?
---------------------------------------
G600 [GZBP0105102004 PANTECH ver 1.0]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
---------------------------------------
G700 [GXNP0107242004 TLION ver 1.0s]
---------------------------------------
none - ???
---------------------------------------
G800 [GLAP0006062004 G800 ver 1.0N]
---------------------------------------
*01763*22637266# (*01763*CAMERAON#) --- Camera test mode on
*01763*79837# (*01763*SWVER#) --- SoftWare version
*01763*28271# --- ?
canliyayin
01-01-2008, 08:13
thank s by khansb...
CHEFERE_MAZ
06-03-2008, 04:53
yessssssss work unlockin gb310 subsidy pass tanks men you are best...
RaSkAl01
06-03-2008, 08:47
this code also good.......................
Nice Sharing...................
FullFLASHgSMPH
08-30-2008, 11:19
Pantech *01763*737381 *
tested g600.....................
pablolimp
07-05-2009, 01:40
usefull code, thanks bro.
hi: i wrote a code in my s100 "*01763*3641#" and the phone is now in "ing. mod" a traid to take it out by usindo "*01763*3640#" but it dont move...what should i do to take my phone to the original mode??:confused: