Upgrade 6210 to 6250 [Archive]

View Full Version : Upgrade 6210 to 6250

platy

11-17-2001, 22:08

Hi guys, i am sorry if it was kicked around here yet, but i havent found anything about this. Today i tryed to upgrade one 6210 with 6250 v5.00 firmware (6210 had had 5.27 fw before). i flashed it with dejan 1.00b and calculated chck via log, phone seems to be ok now, but it has a problem with sound in calls and sometimes it has got problems with sending sms, not always, only sometimes....

do u know if these problems can be solved in wintesla? phone has now many new functions, it will be great if it will be possible to make this upgrade...

has anyone good cracked dlls for NHM-3?

thanx Platy

Bootstrap

11-17-2001, 22:15

Hi,

just try flash with 6250_502 and maybe you will be happy...

WBR Bootstrap

platy

11-17-2001, 22:18

can u send me full flash of it? with C ppm pleaz...

Platy

P.S. thanx for a fast answer...

[ 17 November 2001 21:19: Message edited by: platy ]

Lead

11-17-2001, 22:28

check mail

platy

11-17-2001, 22:41

dikec...

hans_cz

11-17-2001, 22:43

hi, please can you send me full flash of 6250 502 too? with PPM H...

mudboy

11-17-2001, 22:49

Only in Czech language: Ahoj vsichni cesti mobilni maniaci! Mohl by byt nekdo tak hodny a poslal mi 6250 5.02 s cestion??

diky moc

Cau & Regards Mudboy

hans_cz

11-17-2001, 22:53

To Mudboy: ja ti to brzo poslu <img src="smile.gif" border="0">

platy

11-17-2001, 22:54

shame on you men! only english posts pleaz! i cannot understand <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> <img src="biggrin.gif" border="0"> i am downloading it now, after i will send it to u! <img src="tongue.gif" border="0"> <img src="cool.gif" border="0"> Platy <img src="cool.gif" border="0"> P.S.: hans_cz, u`re from Brno???

[ 17 November 2001 21:58: Message edited by: platy ]

mudboy

11-17-2001, 23:39

Thanx to platy

Regards

Kima

11-17-2001, 23:42

To all about upgrading 6210 to 6250... Yes..it is posible... To avoid strange voice you need only to RESET the phone.. I think you all now reset codes for Nokia..- <img src="smile.gif" border="0"> ).. 3370..!!!..Or do it with old good Nokia Tool..- <img src="smile.gif" border="0"> You will lost only address book..Not all, just half of it..- <img src="smile.gif" border="0"> ..Insted of 500 you will have 250 places..!!! b/r KIMA

Bootstrap

11-17-2001, 23:49

Also maybe lost network <img src="wink.gif" border="0">

WBR Bootstrap

hans_cz

11-18-2001, 00:47

Thanx to Lead!

platy: Yes, I'm from Brno :-)

Lead

11-18-2001, 00:54

Partial for 6250 5.02 available <a href="http://lead2000.host.sk/6250_502.zip" target="_blank">here</a>.

mudboy

11-18-2001, 13:04

To everybody who has got MCU & PPM from Lead: PPM is not Czech language(H),it's C! I think we are not able to update 6210 or 6250 to 6250 5.02,because it's same like 3330 4.30. 6250 5.02 can be unlocked with 3330 4.30 solution. Platy tried to update in with logger and he had error!

Correct me if I am wrong. Can anyone write me addresses of 6210,6250 and 7110 MCU,PPM and EEPROM?? Thanx

Mudboy

hans_cz

11-18-2001, 13:23

for Mudboy:

6210 3.01: 520000h (PPM), ? (EPROM) 6210 3.04: 520000h (PPM), 5FC000h (EEPROM) 6210 4.27: 520000h (PPM), 5FA000h (EEPROM) 6210 4.36: 520000h (PPM), ? (EPROM) 6210 5.27: 520000h (PPM), ? (EPROM)

6250 5.00: 530000h (PPM), ? (EPROM) 6250 5.02: 530000h (PPM), ? (EPROM)

7110 4.73: 510000h (PPM), 5FC000h (EEPROM) 7110 4.80: 510000h (PPM), 5FC000h (EEPROM) 7110 4.88: 510000h (PPM), 5FA000h (EEPROM) 7110 5.01: 510000h (PPM), 5FC000h (EEPROM)

Correct me if I'm wrong <img src="smile.gif" border="0">

Hans

mudboy

11-18-2001, 13:26

Thanx so much Regards

Lead

11-18-2001, 13:26

Language package A contains: Danish, Norwegian, English, Swedish and Icelandic.

Language package B contains: Finnish, English, Swedish and German.

Language package C contains: German, English, Turkish, Spanish and French.

Language package D contains: German, English, French and Italian.

Language package E contains: English, French, German and Dutch.

Language package F contains: Spanish, English, Portuguese and Greek.

Language package G contains: Lithuanian, Latvian, Estonian, Russian, English, German, Hebrew and Arabic.

Language package H contains: Croatian, Slovene, Serbian, Czech, English, German and Slovak.

Language package I contains: English, French, German, Russian and Arabic.

Language package J contains: Romanian, English, Hungarian, Polish and Bulgarian.

Language package L contains: Spanish, Portuguese, English, French and German.

Language package O contains: English, German, Turkish, Spanish and French.

Language package Q contains: English, Malaysian and Chinese simplified.

Language package R contains: English, Bahasa (Indonesian and Malaysian), Vietnamese, Thai, Hindi and Tagalog

Language package S contains: English and Chinese traditional.

[ 18 November 2001 12:47: Message edited by: Lead ]

mudboy

11-18-2001, 13:44

great work!!! <img src="biggrin.gif" border="0">

regards Mudboy

G-Man

11-18-2001, 20:21

6210 (NPE-3) 3.01, 3.04, 3.74, 4.08, 4.27, 4.36, 5.01, 5.02, 5.17, 5.27 Best config setting = 6210 61 07 Full flash = 00200000 - 00600000 MCU = 00200000 - 00520000 PPM = 00520000 - 005A0000 Eeprom = 005A0000 - 00600000

6250 (NHM-3) 4.04, 4.05, 5.00 Best config setting = 6250 61 07 Full flash = 00200000 - 00600000 MCU = 00200000 - 00530000 PPM = 00530000 - 005A0000 Eeprom - 005A0000 - 00600000

7110 (NSE-5) 4.88, 4.94, 5.00, 5.01 Best config setting = 7110 61 06 Full flash = 00200000 - 00600000 MCU = 00200000 - 00510000 PPM = 00510000 - 00590000 Eeprom = 00590000 - 00600000

mudboy

11-18-2001, 21:48

G-Man is unstoppable!!! <img src="biggrin.gif" border="0">

Thanx so much

B.R. Mudboy

dave_b_121

11-30-2001, 14:27

Hi there.

Could anyone send me the flash file for updating a 6210 to 6250 with english language? email phoneguy@targetsys.co.uk

Thanks in Advance

Dave

gigaphreak

11-30-2001, 15:22

Can someone please send me 6250 newest(v5_02C) full flash? gigagraphix@gmx.net

or where can i download it

 thx

G-Man

11-30-2001, 17:01

I can send both requested files but how do you intend to upload to a 6210 need Dejan 1.04 or similar.

dave_b_121

11-30-2001, 17:55

Hi G-MAN, I'm going to try and use BRAD's service on Sunday, if that doesn't work I'll play with the other logger service. If I still can't get it to play I've made a full backup which I'll revert to.

Thanks

dave_b_121

12-04-2001, 13:24

Hello,

I tried updating a 6210 to a 6250 using brads logger service, unfortunatly the phone still didn't log onto the network, will I have to buy dejan's 1.04 or is it possible using a logger serveice ?

tkerek

12-04-2001, 13:36

hi!

I successfull upgrade my 6210 to 6250 5.02 two day ago .... Everything works fine , but only problem : my phone don't stop charging .... ofcourse i reset it with nokiatool but nothing... always chargeing <img src="frown.gif" border="0"> ((((

any idea ?

Codezs

12-05-2001, 06:40

help Tried upgrade from 6210 v5.27 >> 6250 v5.02 Can't do log it won't work but tried it with 6250 v5.00 and loged, worked but reception is crap! Resetted with nokia tool but nothing! Sounds return back to normal. 1 bar reception what can be done anybody?????

dave_b_121

12-09-2001, 15:10

Any chance someone could send me the 6250 5.02 mcu file to phoneguy@targetsys.co.uk

I'd really appreciate it.

Thanks

alnasser

01-13-2002, 14:24

Hello

i saccessfall upgrade my 6210 to 6250 every thing is good before I have 280 phone numbers in my phone after upgrading become 250 I see it by logomaneger but only one problem "i can't save any number in the phone & i can't see any number in the phone it show me message "invalid selaction" I tried return to 6210 but it not repair <img src="frown.gif" border="0">

can anyone solve that???!!!!

chrisro

01-13-2002, 15:48

In 6250 you have different antenna. In GSM 900 mode 6210 after upgrade to 6250 is working ok but in 1800 signal is very low. You need to calibrate RF.

platy

01-14-2002, 02:01

[quote]Originally posted by alnasser: Hello

i saccessfall upgrade my 6210 to 6250 every thing is good before I have 280 phone numbers in my phone after upgrading become 250 I see it by logomaneger but only one problem "i can't save any number in the phone & i can't see any number in the phone it show me message "invalid selaction" I tried return to 6210 but it not repair <img src="frown.gif" border="0">

can anyone solve that???!!!!<hr></blockquote>

YES MAN, I HAD SAME PROBLEM, JUST DOWNLOAD NUMBERS FROM PHONE ON LOGOMANAGER (THEY ARE REALLY STILL IN PHONE) AND PUT IT BACK! WORKED FOR ME!

REGARDS PLATY

ARS

01-14-2002, 20:48

Sucesfuly uploaded my 6210 v 5.36 to 6250 v5.00 with Koci logger. Nice :-)))

Mateusz

01-14-2002, 22:27

I do not understand why would anyone want to downgrade 6210 to 6250? It has less space in the phonebook and doesn't have a fast modem! If I had 6250 I would want to change the soft to 6210 (if at all possible), that could be a perfect phone - rugged and with the features I use

Ok, I know, that if your operator does not support 5kb connections, than it may make sense, but otherwise? Mateusz