View Full Version : blazer help
shockboy
08-31-2004, 07:08
hi everyone
i have just brought a blazer from bestgsm. but does anyone have the manual? also my computer don't read the device why? do i use the usb or the ltp port?
any help will be great
thanks
gsmrazvan
08-31-2004, 08:04
u must insert a cable ,for exempel lg1200 cable,and both usb and lpt cable must be inserted
shockboy
08-31-2004, 08:13
thanks for the reply but what about the instruction?
i have 5 cable here
rt-w237 b
rt-w237 d
rt-w237 c
rt-w237 a
rt-w237 e
which cable is for which phone
thanks
gsmrazvan
08-31-2004, 08:46
How to use this LG service soft
Conecting to PC
1. Connect dongle to paralel port.
2. Connect power cable to usb port.
3. Connect cable to DB9 pini for phone.
4. Run software.
How to use
1. Phone no need battery for unlock or flash. ( do not put battery to phone )
2. With phone powerd off push " connect " button.
3. If phone vers is supported "Unlock" and "Lock" button will be activated.
4. If phone vers is not supported only read eep and flash will be activated.In this case
read eep and flash from phone send to us and in max 2-3 day will be new update.
5. Unlock method is safe and will not destroy phone.
6. "Power on phone" button is for test phone if works or not ( must be still conected to cable ).
7. If you want to change vers of phone make BACKUP first saving epp anf flash.
8. Flash files from CD are for dead phones to repair them.
shockboy
08-31-2004, 09:25
i thank you for the reply. but which of the cable is for what phone?
.::Gsmdenis::.
08-31-2004, 12:10
oh
i think how to use must have to make a user's guide on the website.
if do this many user will be accept by quickly. :rolleyes: :rolleyes:
denis
shockboy
08-31-2004, 14:22
:confused:
please please tell mewhich cable is for which phone?
thanks
:confused:
please please tell mewhich cable is for which phone?
thanks
Hello
Here is the name of each cable.
A. C1200,C1100...
B. B1200 and Alcatel 320
C. 5xxx and 7100
D. 7xxx and 4xxx
E. B1300
Regards
Moca
support@blazer-team.com
shockboy
09-04-2004, 03:16
thanks for the informations. but i try to unlock c1100 using the latest update 49d the program say new version find ask for update, where can i find the new update to 49d?
thanks for the informations. but i try to unlock c1100 using the latest update 49d the program say new version find ask for update, where can i find the new update to 49d?
Hello
When software ask about update zou must read flash 1 and flash 2 and upload it on our ftp area.
For more details contact me at support@blazer-team.com and moca@gate8.ro.
Regards
Moca
mr_x4you
09-05-2004, 00:47
Well what about L1100, can't conect it with Blazer, phone powers on, C1200 unlocking is ok !? Is it a cable problem ?
eeusebiu
09-05-2004, 02:02
Well what about L1100, can't conect it with Blazer, phone powers on, C1200 unlocking is ok !? Is it a cable problem ?
I unlock L1100 with ver 4.9c , try this version .....
if dosen't work it's your cable fault.
wbr,
Well what about L1100, can't conect it with Blazer, phone powers on, C1200 unlocking is ok !? Is it a cable problem ?
The cable for C1200 is not same for unlock at L1100.
Best regards,
Irinel
mr_x4you
09-05-2004, 11:59
Tried A and D type cables, none working
moldovan
09-06-2004, 23:36
The cable for C1200 is not same for unlock at L1100.
Best regards,
Irinel
What difference betwen C1200 and L1100 cables. If possible send me schematic of L1100 cable. PLEASE!
er1cc@mail.ru
WBR Paul Kishinev.
GSM Brothers
09-07-2004, 08:16
What difference betwen C1200 and L1100 cables. If possible send me schematic of L1100 cable. PLEASE!
er1cc@mail.ru
WBR Paul Kishinev.
no is difference betwen C1200 and L1100. I think no work with blazer. I have here L1100 and unlocked with another soft .Autor(Sami) check please this.
*******C1100,C1200,C1300,C1400,LG40xx,LG70XX,L11XX pinout************************
keybord up
24.............1
3,12,19,23 - GND
13 - RX (data to phone)
14 - TX (data from phone)
6 - via 10 kOm resistor to +5V
moldovan
09-07-2004, 20:22
no is difference betwen C1200 and L1100. I think no work with blazer. I have here L1100 and unlocked with another soft .Autor(Sami) check please this.
*******C1100,C1200,C1300,C1400,LG40xx,LG70XX,L11XX pinout************************
keybord up
24.............1
3,12,19,23 - GND
13 - RX (data to phone)
14 - TX (data from phone)
6 - via 10 kOm resistor to +5V
Yes I have same PinOut for L1100 , but constructors sad me problem unlocking L1100 in the cable , I dont know.
Can You share with me Sami soft? wery need.
WBR Paul er1cc@mail.ru
GSM Brothers
09-07-2004, 20:35
Yes I have same PinOut for L1100 , but constructors sad me problem unlocking L1100 in the cable , I dont know.
Can You share with me Sami soft? wery need.
WBR Paul er1cc@mail.ru
Sami is autor to Blazer soft ;)
Yes I have same PinOut for L1100 , but constructors sad me problem unlocking L1100 in the cable , I dont know.
Can You share with me Sami soft? wery need.
WBR Paul er1cc@mail.ru
Contact me via ICQ or Sonork, 100% i can help you NOW!!!.
Best regards,
Irinel
Please also highly need pinout of L1100
email chafeh2001@yahoo.fr
Please also need this pinout for L1100. I tried for Lg c1200 and is not working.
EndlessConnections
09-09-2004, 22:28
its better to buy cables from your Reseller!
I am using v49c. What is the use of the red crocodile clip. Does this need to be connected somewhere on the battery terminal?
I can get the software to work. I press connect and then after few seconds it shows disconnected and nothing happens.
Thanks
Chubby
the cable with crocodile is for alcatel 320.
the cable with crocodile is for alcatel 320.
Thanks for the reply
I still cant get the software to work. Tried with LGB1200. Pressed connect. After few seconds it says "Communication Error". Tried several times. Checked cable connection - all ok. Still it wont work.
Thanks
Chubby
.::Gsmdenis::.
10-10-2004, 15:56
hi friend:
why did not download the ver 5.0 to update your software ver?
and when you flasher you must connect your dongel with LTP(ecp model) to your pc at frist,then choose which model did you wanted to flasher ,pls choose the right cable, (must insert yout cable on flasher dongel before to flash), at last ,press the quickly icon on your desktop......
BR
denis
msn:dennis_dd@otmail.com
RUL: www.boilpass.com
hi friend:
why did not download the ver 5.0 to update your software ver?
and when you flasher you must connect your dongel with LTP(ecp model) to your pc at frist,then choose which model did you wanted to flasher ,pls choose the right cable, (must insert yout cable on flasher dongel before to flash), at last ,press the quickly icon on your desktop......
BR
denis
msn:dennis_dd@otmail.com
RUL: www.boilpass.com
Guys please open always a new topic.
B.R.,
Raskal
p.s. dennis, the latest version on ftp is not 5.0, 5.2 is correct :p :p :p