View Full Version : Cables Problem with the new update 5.0
Blazer Update 5.0 released
This is what I got with the new version
Cable B is detected by software as B. ?
Cable E is detected by software as B. ?
Cable C is detected by software as B. ?
Cable A detected ok!
Cable D detected ok!
Please help Us .
Best regards.
EndlessConnections
09-12-2004, 08:55
Since ,youre in USA you shouldnt be worried about other cables and as for the Update, Blazer Team works on updates 24/7 and will resolve this issue soon.
Blazer Update 5.0 released
This is what I got with the new version
Cable B is detected by software as B. ?
Cable E is detected by software as B. ?
Cable C is detected by software as B. ?
Cable A detected ok!
Cable D detected ok!
Please help Us .
Best regards.
dannyogolo
09-14-2004, 19:59
I think I have same problem
I tried to use cable C for 7100, but It detected it as Alcatel 320 Cable B
I tried E to, same thing.
Now I cant do anything with that phone.
Is this software or cable problem ???
I also tried with 4.9c and 4.9e, both give same error (though this was after first using 5.0)
I think I have same problem
I tried to use cable C for 7100, but It detected it as Alcatel 320 Cable B
I tried E to, same thing.
Now I cant do anything with that phone.
Is this software or cable problem ???
I also tried with 4.9c and 4.9e, both give same error (though this was after first using 5.0)
We will double check it tomorow, and let post here results.
I had this problem too, eeprom content inside cables was wrong.
After reprogram them all is OK and works fine
Regards
Phil
We will double check it tomorow, and let post here results.
WE STILL WAITING FOR THE RESULTS .PLEASE
BEST REGARDS.
hoangminhtam
09-16-2004, 20:27
i have problm. with the cable C1200 that i made after Blazer's hex n schema c1200.
the box can not detect the cable
inside, i use eep. 24c256 instead of 24LC256 as guided in schema .
m' I wrong ??
dannyogolo
09-17-2004, 10:53
Yes, we are waiting for solution for bad cables
I have problem with cables "C" when working with G5300i!!!
Always must to press and hold power button untill all done!!!
WBR
doctormike
09-18-2004, 00:53
Dear Blazer Team,
I also have cable problems:
Cable A is not recognized at all and get message : Insert cable
Cable B is recognized as E.
I tried versions 49 & 50 of your software.
PS. I am new user and have no older versions to check.
Running WinXP - SP1 and have tried on another pc under WinMe; results are the same.
Regards
Mike
I had this problem too, eeprom content inside cables was wrong.
After reprogram them all is OK and works fine
Regards
Phil
I see teleway start copy cables :) to make it cheap.
Let see how cheap can make the uni box...
I see teleway start copy cables :) to make it cheap.
Let see how cheap can make the uni box...
We are all waiting for that.But what we should do with our bad cables ? :confused:
We are all waiting for that.But what we should do with our bad cables ? :confused:
Ask your reseller for replacement and they will do that, is the fastest way.
Ask your reseller for replacement and they will do that, is the fastest way.
Thank you a lot . :) :)
I have problem with cables "C" when working with G5300i!!!
Always must to press and hold power button untill all done!!!
WBR
Connect pn 15 to 18, that's all!
Yes,U are right bro!!!
Now all done!!!
I already open my cables( which include with my box ) and see hehe
Pin 13 short pin 15 to GND :mad:
Now 15 short to 18 ( PWO short to VBAT ) and pin 13 is GND!!!
WBR
taopheek
10-02-2004, 23:54
I think I have same problem
I tried to use cable C for 7100, but It detected it as Alcatel 320 Cable B
I tried E to, same thing.
Now I cant do anything with that phone.
Is this software or cable problem ???
I also tried with 4.9c and 4.9e, both give same error (though this was after first using 5.0)
hey im still waiting for the reply cos i ve d same prob with Danny :mad: